Hello, I pushed following updates:
commit a1a869fa9d64312352a172ecffc0f994c73c20f0 (fslc/master-next, fslc/master, pending) Author: Max Krummenacher <[email protected]> Date: Fri Dec 4 14:18:38 2015 +0100 colibri-imx6: add machine configuration The Toradex Colibri iMX6 computer module is based on i.MX 6. The Colibri iMX6 is a member of the pincompatible Colibri family. They feature on module RAM and EMMC, Ethernet PHY, Resistive Touch Controller and Audio Codec. For additional specifications please visit: https://www.toradex.com/computer-on-modules/colibri-arm-family/freescale-imx6 Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 893ad6b25b53995b427c4cd3c756dc332f7a79f8 Author: Max Krummenacher <[email protected]> Date: Fri Dec 4 14:18:37 2015 +0100 apalis-imx6: add machine configuration The Toradex Apalis iMX6 computer module is based on i.MX 6. The Apalis iMX6 is a member of the pincompatible Apalis family. They feature on module RAM and EMMC, Ethernet PHY, Resistive Touch Controller and Audio Codec. For additional specifications please visit: https://www.toradex.com/computer-on-modules/apalis-arm-family/freescale-imx-6 Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit add251c77206e3e48867533bb95e7ac26138cffb Author: Max Krummenacher <[email protected]> Date: Fri Dec 4 14:18:36 2015 +0100 linux-toradex: add Linux defconfig for Toradex Colibri iMX6 This adds a defconfig for the Freescale i.MX 6 based modules Colibri iMX6. - based on Freescale's BSP release imx_3.14.28_1.0.0_ga release and patches from Boundary Devices - GPIOlib /sys/class/gpio - PWM LEDs /sys/class/leds/ - temperature sensor CPU /sys/devices/virtual/thermal/thermal_zone0/temp board: /sys/devices/soc0/soc.1/2100000.aips-bus/21a4000.i2c/i2c-1/1-0041/stmpe-adc/iio:device0/in_temp8_raw - Ethernet - eMMC/SD/MMC - serial console debug UART1 - UARTs - I2C via /dev/i2c-X - framebuffer console - HDMI audio - analogue audio playback and capture, resistive touch - S/PDIF - SPI via /dev/spidev - serial number and board revision - USB host port - USB device Ethernet RNDIS - automatic USB device/host switching - analog input via IIO framework - parallel camera interface - DVFS power management - suspend LP1 - watchdog Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit c8b2f859c15e8e14d84dead232d46f0e08045a8e Author: Max Krummenacher <[email protected]> Date: Fri Dec 4 14:18:35 2015 +0100 linux-toradex: add Linux recipe for Toradex Apalis iMX6 This recipe provides a kernel for the Freescale i.MX 6 based modules Apalis iMX6. - based on Freescale's BSP release imx_3.14.28_1.0.0_ga release and patches from Boundary Devices - GPIOlib /sys/class/gpio - PWM LEDs /sys/class/leds/ - temperature sensor CPU /sys/devices/virtual/thermal/thermal_zone0/temp board: /sys/devices/soc0/soc.1/2100000.aips-bus/21a4000.i2c/i2c-1/1-0041/stmpe-adc/iio:device0/in_temp8_raw - Ethernet - eMMC/SD/MMC - serial console debug UART1 - UARTs - I2C via /dev/i2c-X - framebuffer console - HDMI audio - analogue audio playback and capture, resistive touch - S/PDIF - SPI via /dev/spidev - serial number and board revision - USB host ports - USB device Ethernet RNDIS - automatic USB device/host switching - analog input via IIO framework - parallel camera interface - DVFS power management - suspend LP1 - watchdog - CAN on via can0 and can1 - PCIe (regular ports and mini-PCIe slot) - SATA (regular port or mSATA slot) - LVDS output - analog VGA output Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit b8e0e9170d692a8f0441bf24a3dc7c431a0b8d8f Author: Max Krummenacher <[email protected]> Date: Fri Dec 4 14:18:34 2015 +0100 u-boot-toradex: add U-Boot recipe for Toradex i.MX 6 based modules This allows building U-Boot supporting Toradex modules based on i.MX 6 Apalis iMX6 and Colibri iMX6. The source is combined with the source already used for our Vybrid based modules and fetched directly from our Git server at git.toradex.com. - based on upstream U-Boot 2015.04 - environment storage in eMMC - Ethernet - enabled gpio command line interface - enabled DFU and Mass Storage on USB client - framebuffer support - MMC/SD cards - eMMC flash - RAM size auto detection - serial console debug UART1 - Toradex Apalis configuration block handling - USB storage as host on USB host ports Signed-off-by: Max Krummenacher <[email protected]> Acked-by: Stefan Agner <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 40f85fde3584c5f85b8964aeffa4e07bd0a55874 Author: Tony Felice <[email protected]> Date: Thu Dec 3 16:35:16 2015 -0500 mcc: Update MCC packages to be dual license (GPLv2 or BSD) Change the MCC packages to be licensed under either GPLv2 or BSD. This is less restrictive than the previous GPLv2-only license for these packages. Signed-off-by: Anthony Felice <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> Regards, -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
