Thanks for the info.
As the Kontron patch is currently only applicable to the Yocto Daisy branch, does anyone has experience in building Qt 5.4 or newer on Daisy? The meta-qt5 Daisy branch builds Qt 5.2.1 and I would be interested in using the QtWebEngine module that is introduced in Qt 5.4. Regards, Andreas Enbacka From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: 9. joulukuutata 2015 9.37 To: [email protected] Subject: Re: [meta-freescale] Qt 5.4 on Kontron SMARC sAMX6i > I have successfully got Qt 5.2.1 version running on Kontron SMARC sAMX6i > using the official Kontron Yocto patch. However, in order to use the newer > WebEngine component I need to upgrade to version 5.4. Anyone has some > experience building a newer version of Qt using SMARC? I've compiled both 5.5.0 and 5.5.1 for i.MX6 SMARC device, just not Kontron. I've done it manually using linux-imx6-g++ device configuration but it should be doable with yocto too with meta-qt5 layer <https://github.com/meta-qt5/meta-qt5> https://github.com/meta-qt5/meta-qt5. -- Marko Kenttälä, Software Developer, mobile +358 500 627 565 Parker Hannifin Manufacturing Finland Oy, Electronic Controls Division PO Box 116 (Polunmäenkatu 22) FI-33721 Tampere, Finland _____ "PLEASE NOTE: The preceding information may be confidential or privileged. It only should be used or disseminated for the purpose of conducting business with Parker. If you are not an intended recipient, please notify the sender by replying to this message and then delete the information from your system. Thank you for your cooperation."
-- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
