Writing this to the mailing list for sake of completeness: this turned
out to be a memory leak in the GPU driver, imx-gpu-viv 5.0.11.p4.4.
Upgrading to 5.0.11.p4.5 fixed the issue.
On 2015-12-22 13:17, Carlos Rafael Giani wrote:
This is strange. For me, it looped over 160 times before I stopped it.
I'll compare your config to that of the boundarydevices kernel. (Also
note that this kernel might have patches that yours doesn't.)
Try to repeatedly print out the contents of /proc/buddyinfo,
especially the DMA row. I did, and the bins stayed relatively stable.
If these bins rapidly decrease for you, then we might be looking at a
kernel issue, or a problem with imx-vpu.
On 12/22/2015 12:16 PM, Vikas Patil wrote:
Hi Carlos,
Yes. After reconfiguration saw memory allocation failure after 35th
loop.
Attached here the complete log with allocation failure after 53rd time
with master branch of plug-in and libimxvpuapi and CMA configs I
mentioned.
Regards,
Vikash
On Tue, Dec 22, 2015 at 4:11 PM, Carlos Rafael Giani
<[email protected]> wrote:
You mean, "before the CMA reconfiguration, the loop-video test
failed in the
5th loop, but after reconfiguration, it still runs after the 37th
loop"?
On 2015-12-22 11:19, Vikas Patil wrote:
Hi Carlos,
I could run the video and see the output on dislay after commenting
libgstimxaudio.so but only one loop. Attached here the log.
Also after enabling following kernel configs I could run the videotest
player application which I have till 37th loop before it was failing
in 5th loop itself.
CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=256
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7
Regards,
Vikas
On Tue, Dec 22, 2015 at 3:18 PM, Carlos Rafael Giani
<[email protected]> wrote:
This is a different error, however. It seems to be caused by an AAC
decoding
issue. Try removing the libgstimxaudio.so file from /usr/lib/ on your
device. Note that you will need another AAC decoder then.
gst-libav can
decode AAC. So can the libgstfaad plugin (part of gst-plugins-bad).
Would it also be possible for you to give me a copy of this
B01_Baseline1.0_1280_720.MP4 file?
On 2015-12-22 10:39, Vikas Patil wrote:
Hi Carlos,
Still I could not play. Attached here the log.
Regards,
Vikas
On Tue, Dec 22, 2015 at 12:34 AM, Carlos Rafael Giani
<[email protected]> wrote:
Can you try out the example program I attached? Just run it like
this:
GST_DEBUG=2,*imx*:5 ./loop-videos -i 5000 -v
"imxipuvideotransform !
imxeglvivsink" /home/root/B01_Baseline1.0_1280_720.MP4
This will run the mp4 video for 5 seconds and then start again.
Note
that
you have to build it with the -std=c++11 compiler flag.
>
--
_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
