Hello Stephen, On Sat, Jan 9, 2016 at 3:21 PM, Stephen Arnold <[email protected]> wrote: > I guess I'm not sure what the "expected" state is; I had thought that > release branches should build okay, along with master (which for me > has almost always been buildable). But I'm also used to building > other machines more so than fsl, so if there's a doc I can look at > that would be good ;) > > Is master actually expected to build? (and master-next assumed > possibly broken) Or are both assumed edgy? > > Anyway, I just hit the Qt4 churn (missing bbclass but recipes still > there) so I switched to fido on poky/oe and hit a few more problems on > fsl master: > > 1) meta-fsl-arm/recipes-bsp/barebox/barebox_2013.08.0.bb doesn't match > the barebox_2015.10.0.bbappend in meta-fsl-arm-extra. > > Temp solution: git mv recipes-bsp/barebox/barebox_2015.10.0.bbappend > recipes-bsp/barebox/barebox_%.bbappend > > 2) ERROR: Task 223 > (/home/sarnold/fsl/sources/meta-fsl-arm/recipes-bsp/u-boot/u-boot-fslc_2015.04.bb, > do_compile) failed with exit code '1 > > arm-poky-linux-gnueabi-gcc > --sysroot=/home/sarnold/fsl/build-imx233mini/tmp/sysroots/imx233-olinuxino-mini > -E -Wp,-MD,./..cfgtmp.d -nostdinc -isystem > /home/sarnold/fsl/build-imx233mini/tmp/sysroots/x86_64-linux/usr/lib/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.9.2/include > -Iinclude -I./arch/arm/include -include ./include/linux/kconfig.h > -D__KERNEL__ -D__UBOOT__ -DCONFIG_SYS_TEXT_BASE=0x40002000 > -D__ARM__ -marm -mno-thumb-interwork -mabi=aapcs-linux > -mword-relocations -ffunction-sections -fdata-sections -fno-common > -ffixed-r9 -msoft-float -pipe -march=armv5te -x c -o .cfgtmp > FORCE > | arm-poky-linux-gnueabi-gcc: error: FORCE: No such file or directory > | arm-poky-linux-gnueabi-gcc: warning: '-x c' after last input file > has no effect > | arm-poky-linux-gnueabi-gcc: fatal error: no input files > > Haven't looked at this yet, but denx u-boot v2015.10 built and booted > fine last night, so I'm about to switch (not sure why it needs > u-boot-fslc?) > > I'm resetting to jethro for now.
I am not understanding what you did. Can you provide a list of repositories and branches? -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
