Hi, On Wed, Jun 22, 2016 at 1:02 AM, Miroslav Lazic <[email protected]> wrote: > Hi, > > I'm using Nitrogen6x 2Gb with Ubuntu image from > https://boundarydevices.com/mx-linux-kernel-3-14-52 and U-Boot > 2015.07-15001-g440d481 (Oct 07 2015 - 12:32:09 -0700).
This mailing list is about Yocto, not Ubuntu. Next time please ask your question on our blog or NXP community forum. > Also, I set > allow_noncea=1 > bootargs=video=mxcfb0:dev=ldb,1024x600M@60,if=RGB666 If you read the blog post carefully, it says: This release uses the same mechanism as the 3.14.28 which means that U-Boot is in charge of setting the display parameters in the device tree. So it requires to use U-Boot v2015.07 or higher. Please make sure to read our blog post about this release: https://boundarydevices.com/compiling-latest-u-boot-for-i-mx6-2015-edition/ There you'll learn how to setup the displays, which cannot be done with the bootargs. Regards, Gary -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
