I did a core-image-minimal build for the SCM quick start board. I attempted to write the kernel, rootfs, and bootloader to an SD card using the instructions in the i.MX_Linux_User's_Guide. The bootloader seems to load fine and looks like it is able to find the kernel, however, it is not able to find the .dtb. I get the following error:
Normal Boot Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device reading boot.scr ** Unable to read file boot.scr ** reading zImage 6041144 bytes read in 293 ms (19.7 MiB/s) Booting from mmc ... reading imx6dqscm-1gb-qwks-rev2-fix-ldo.dtb ** Unable to read file imx6dqscm-1gb-qwks-rev2-fix-ldo.dtb ** Kernel image @ 0x12000000 [ 0x000000 - 0x5c2e38 ] No gpc device node -9, force to ldo-enable. Is the issue that the .dtb is not in the location the bootloader is looking for? ali ismail engineer ii [cid:[email protected]] P 720.257.7128 10875 dover street, unit 200 westminster, colorado 80021 www.syncroness.com<http://www.syncroness.com/> [Winner's Signature] ________________________________ CONFIDENTIALITY NOTICE: This email transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify the sender. Please destroy the original transmission and its attachments without reading or saving in any manner.
-- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
