On 07/04/17, Jonathan Poulin wrote:
> Hello Olivier,
> I had a similar problem. Look at
> This was cause by a mismatch between the ECC strength used by the write of
> the partition and the one used by the reader. Try the solution that I link
> in the answer of my post.
thx for this hint. Unfortunately the patch didn't work for me. What does
your gpmi device node look like?
I write my NAND with mfgtool which runs 4.1.15_1.0.0 kernel during the
flash operation itself.
But on first boot it starts 4.9.18-fslc and on reading I got these ECC
errors. So it's quite possible that the ECC strength is different
between both kernel versions.
Furthermore the gpmi-nand driver has major changes between both kernel
meta-freescale mailing list