Hello.

I examined this today again, and found that following makes this error 
disappear.


PERFERRED_PROVIDER_uboot = "u-boot-imx"

PERFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"

PERFERRED_PROVIDER_uboot-mxsboot-native = "u-boot-imx"

Looks like recent u-boot-fslc does not handle imx6qsabreauto (which I was 
trying), and if I specified u-boot-imx, errors from pca953x, mag3110, mma845x 
are all gone, and I can lsusb to list USB devices.


________________________________
From: Otavio Salvador <otavio.salva...@ossystems.com.br>
Sent: Tuesday, July 4, 2017 10:48 PM
To: Takashi Matsuzawa
Cc: meta-freescale@yoctoproject.org; Lauren Post
Subject: Re: [meta-freescale] unable to initialize libusb: -99

On Tue, Jul 4, 2017 at 7:28 AM, Takashi Matsuzawa <tmatsuz...@xevo.com> wrote:
> Today I tried testing with the unmodified images.
>
> (just followed the build instruction on README from
> https://github.com/Freescale/fsl-community-bsp-platform), and the result was

> the below.
>
>
> lsusb on imx61sabreauto board:
>
>
> 2.0 (jethro) - OK
>
> 2.1 (krogoth) - NG
>
> 2.2 (morty) - NG
>
> 2.3 (pyro) - NG
>
>
> I am curious since it is OK (lsusb correctly list the USB devices) with
> jethro, but NG on krogoth and after.
> I may look into the delta but still not sure where to look into.
> Any comment/suggestion is welcomed.

I am adding Lauren on Cc. She may know something about it.

--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
O.S. Systems<http://www.ossystems.com.br/>
www.ossystems.com.br
O.S. Systems is specialized in the development, customization and consultancy 
of embedded operating systems and BSPs based on Linux.



Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
-- 
_______________________________________________
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

Reply via email to