This release provides a huge improvement regarding the support for SPL
to more boards.

We now uses this and migrated following boards:

 - imx6qpsabresd -> imx6qdlsabresd
 - imx6qsabresd -> imx6qdlsabresd
 - imx6dlsabresd -> imx6qdlsabresd
 - imx6solosabresd -> imx6qdlsabresd
 - imx6qpsabreauto -> imx6qdlsabreauto
 - imx6qsabreauto -> imx6qdlsabreauto
 - imx6dlsabreauto -> imx6qdlsabreauto
 - imx6solosabreauto -> imx6qdlsabreauto

So now, the 8 boards are covered by 2 machine files. This drastically
reduces the build time and allow for a better user experience as we
can use the same image to test different boards.

In summary an image built for imx6qdlsabresd or imx6qdlsabreauto is
capable of run on a its respective board which contains a i.MX6
QuadPlus, Quad, Dual, DualLite or Solo SoC removing the need of a
specific image for each SoC type.

On top of the official 2017.07 release, following patches are
included:

fc1d8ff897 embestmx6boards: Use PARTUUID to specify the rootfs location
1f39337464 mx6cuboxi: Use PARTUUID to specify the rootfs location
8283aee68f wandboard: Use PARTUUID to specify the rootfs location
89a22f3e48 wandboard: Set fdt based on board_rev and board_name
ffcdec3521 warp: Change default bootenv configuration
546c2e61b1 mx6sabresd: Enable video interfaces in bootargs
bb5efb2a4d iMX6: Change mmcroot to use fixed mmc block index for USDHC
caf484b208 mx6sabresd: Use LDO dtb file until LDO bypass support is added
7bdd42b17a mx6slevk: Use LDO dtb file until LDO bypass support is added
47e1d1ca18 mx6sabre: Use PARTUUID to specify the rootfs location
9f793c5429 mx6sabreauto: Do not enable WEIM by default
029f4b321a mx6sabreauto: Update to SPL only mode
873656c162 mx6qsabreauto: Add SPL support
183c4ba268 mx6: soc: Move mxs_dma_init() into the mxs nand driver

Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
---

Changes in v3:
 - add mx6sabre: Use PARTUUID to specify the rootfs location
 - add mx6sabreauto: Do not enable WEIM by default
 - improve machine description to mention QP support as  well (Daiane)
 - improve commit log to make it clear that same image can be used
   across different boards (Daiane)

Changes in v2:
- include fslc specific patches
- fix typo on commit log (Fabio Estevam)
- improve log to mention specific patches

 conf/machine/imx6dlsabreauto.conf                  | 19 -------------
 conf/machine/imx6dlsabresd.conf                    | 19 -------------
 conf/machine/imx6qdlsabreauto.conf                 | 32 ++++++++++++++++++++++
 conf/machine/imx6qdlsabresd.conf                   | 32 ++++++++++++++++++++++
 conf/machine/imx6qpsabreauto.conf                  | 24 ----------------
 conf/machine/imx6qpsabresd.conf                    | 20 --------------
 conf/machine/imx6qsabreauto.conf                   | 20 --------------
 conf/machine/imx6qsabresd.conf                     | 17 ------------
 conf/machine/imx6solosabreauto.conf                | 21 --------------
 conf/machine/imx6solosabresd.conf                  | 19 -------------
 conf/machine/imx6sxsabreauto.conf                  |  9 +++++-
 conf/machine/imx6sxsabresd.conf                    |  9 +++++-
 conf/machine/include/imx6sabreauto-common.inc      | 10 -------
 conf/machine/include/imx6sabresd-common.inc        | 10 -------
 ...t_2016.09.bb => u-boot-fslc-mxsboot_2017.07.bb} |  6 ++--
 recipes-bsp/u-boot/u-boot-fslc_2017.03.bb          |  6 ----
 recipes-bsp/u-boot/u-boot-fslc_2017.07.bb          |  6 ++++
 17 files changed, 89 insertions(+), 190 deletions(-)
 delete mode 100644 conf/machine/imx6dlsabreauto.conf
 delete mode 100644 conf/machine/imx6dlsabresd.conf
 create mode 100644 conf/machine/imx6qdlsabreauto.conf
 create mode 100644 conf/machine/imx6qdlsabresd.conf
 delete mode 100644 conf/machine/imx6qpsabreauto.conf
 delete mode 100644 conf/machine/imx6qpsabresd.conf
 delete mode 100644 conf/machine/imx6qsabreauto.conf
 delete mode 100644 conf/machine/imx6qsabresd.conf
 delete mode 100644 conf/machine/imx6solosabreauto.conf
 delete mode 100644 conf/machine/imx6solosabresd.conf
 delete mode 100644 conf/machine/include/imx6sabreauto-common.inc
 delete mode 100644 conf/machine/include/imx6sabresd-common.inc
 rename recipes-bsp/u-boot/{u-boot-fslc-mxsboot_2016.09.bb => 
u-boot-fslc-mxsboot_2017.07.bb} (87%)
 delete mode 100644 recipes-bsp/u-boot/u-boot-fslc_2017.03.bb
 create mode 100644 recipes-bsp/u-boot/u-boot-fslc_2017.07.bb

diff --git a/conf/machine/imx6dlsabreauto.conf 
b/conf/machine/imx6dlsabreauto.conf
deleted file mode 100644
index 51fb7028..00000000
--- a/conf/machine/imx6dlsabreauto.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-#@TYPE: Machine
-#@NAME: NXP i.MX6DL SABRE Automotive
-#@SOC: i.MX6DL
-#@DESCRIPTION: Machine configuration for NXP i.MX6DL SABRE Automotive
-#@MAINTAINER: Daiane Angolini <daiane.angol...@nxp.com>
-
-MACHINEOVERRIDES =. "mx6:mx6dl:"
-
-require conf/machine/include/imx6sabreauto-common.inc
-
-KERNEL_DEVICETREE = "imx6dl-sabreauto.dtb imx6dl-sabreauto-gpmi-weim.dtb 
imx6dl-sabreauto-ecspi.dtb \
-                     imx6dl-sabreauto-flexcan1.dtb 
imx6dl-sabreauto-enetirq.dtb"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6dlsabreauto_config,sdcard"
-UBOOT_CONFIG[eimnor] = "mx6dlsabreauto_eimnor_config"
-UBOOT_CONFIG[nand] = "mx6dlsabreauto_nand_config,ubifs"
-UBOOT_CONFIG[spinor] = "mx6dlsabreauto_spinor_config"
-UBOOT_CONFIG[mfgtool] = "mx6dlsabreauto_config"
diff --git a/conf/machine/imx6dlsabresd.conf b/conf/machine/imx6dlsabresd.conf
deleted file mode 100644
index 27b8391c..00000000
--- a/conf/machine/imx6dlsabresd.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-#@TYPE: Machine
-#@NAME: NXP i.MX6DL SABRE Smart Device
-#@SOC: i.MX6DL
-#@DESCRIPTION: Machine configuration for NXP i.MX6DL SABRE Smart Device
-#@MAINTAINER: Otavio Salvador <ota...@ossystems.com.br>
-
-MACHINEOVERRIDES =. "mx6:mx6dl:"
-
-require conf/machine/include/imx6sabresd-common.inc
-
-KERNEL_DEVICETREE = "imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb 
imx6dl-sabresd-hdcp.dtb \
-                     imx6dl-sabresd-enetirq.dtb imx6dl-sabresd-btwifi.dtb"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6dlsabresd_config,sdcard"
-UBOOT_CONFIG[epdc] = "mx6dlsabresd_epdc_config"
-UBOOT_CONFIG[mfgtool] = "mx6dlsabresd_config"
-
-MACHINE_FIRMWARE += "firmware-imx-epdc"
diff --git a/conf/machine/imx6qdlsabreauto.conf 
b/conf/machine/imx6qdlsabreauto.conf
new file mode 100644
index 00000000..6dcf5c4b
--- /dev/null
+++ b/conf/machine/imx6qdlsabreauto.conf
@@ -0,0 +1,32 @@
+#@TYPE: Machine
+#@NAME: NXP i.MX6QP/Q/DL SABRE Automotive
+#@SOC: i.MX6QP/Q/DL
+#@DESCRIPTION: Machine configuration for NXP i.MX6QP/Q/DL SABRE Automotive
+#@MAINTAINER: Daiane Angolini <daiane.angol...@nxp.com>
+
+MACHINEOVERRIDES =. "mx6:mx6q:mx6dl:"
+
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa9.inc
+
+KERNEL_DEVICETREE = " \
+    imx6qp-sabreauto.dtb imx6qp-sabreauto-ecspi.dtb 
imx6qp-sabreauto-flexcan1.dtb \
+    imx6qp-sabreauto-gpmi-weim.dtb \
+    \
+    imx6q-sabreauto.dtb imx6q-sabreauto-gpmi-weim.dtb 
imx6q-sabreauto-ecspi.dtb \
+    imx6q-sabreauto-flexcan1.dtb imx6q-sabreauto-enetirq.dtb \
+    \
+    imx6dl-sabreauto.dtb imx6dl-sabreauto-gpmi-weim.dtb 
imx6dl-sabreauto-ecspi.dtb \
+    imx6dl-sabreauto-flexcan1.dtb imx6dl-sabreauto-enetirq.dtb \
+"
+
+UBOOT_MACHINE ?= "mx6sabreauto_defconfig"
+UBOOT_MAKE_TARGET = "all"
+UBOOT_SUFFIX = "img"
+SPL_BINARY = "SPL"
+
+SERIAL_CONSOLE = "115200 ttymxc3"
+
+MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
+
+MACHINE_FEATURES += " pci wifi bluetooth"
diff --git a/conf/machine/imx6qdlsabresd.conf b/conf/machine/imx6qdlsabresd.conf
new file mode 100644
index 00000000..8c1f9a06
--- /dev/null
+++ b/conf/machine/imx6qdlsabresd.conf
@@ -0,0 +1,32 @@
+#@TYPE: Machine
+#@NAME: NXP i.MX6QP/Q/DL SABRE Smart Device
+#@SOC: i.MX6QP/Q/DL
+#@DESCRIPTION: Machine configuration for NXP i.MX6QP/Q/DL SABRE Smart Device
+#@MAINTAINER: Otavio Salvador <ota...@ossystems.com.br>
+
+MACHINEOVERRIDES =. "mx6:mx6q:mx6dl:"
+
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa9.inc
+
+KERNEL_DEVICETREE = " \
+    imx6qp-sabresd.dtb imx6qp-sabresd-btwifi.dtb imx6qp-sabresd-hdcp.dtb \
+    imx6qp-sabresd-ldo.dtb imx6qp-sabresd-ldo-pcie-cert.dtb \
+    \
+    imx6q-sabresd.dtb imx6q-sabresd-ldo.dtb imx6q-sabresd-hdcp.dtb \
+    imx6q-sabresd-enetirq.dtb imx6q-sabresd-btwifi.dtb \
+    \
+    imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb imx6dl-sabresd-hdcp.dtb \
+    imx6dl-sabresd-enetirq.dtb imx6dl-sabresd-btwifi.dtb \
+"
+
+UBOOT_MACHINE ?= "mx6sabresd_defconfig"
+UBOOT_MAKE_TARGET = "all"
+UBOOT_SUFFIX = "img"
+SPL_BINARY = "SPL"
+
+SERIAL_CONSOLE = "115200 ttymxc0"
+
+MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
+
+MACHINE_FEATURES += " pci wifi bluetooth"
diff --git a/conf/machine/imx6qpsabreauto.conf 
b/conf/machine/imx6qpsabreauto.conf
deleted file mode 100644
index 505d341c..00000000
--- a/conf/machine/imx6qpsabreauto.conf
+++ /dev/null
@@ -1,24 +0,0 @@
-#@TYPE: Machine
-#@NAME: NXP i.MX6Q Plus SABRE Automotive
-#@SOC: i.MX6QP
-#@DESCRIPTION: Machine configuration for NXP i.MX6QP SABRE Automotive
-#@MAINTAINER: Lauren Post <lauren.p...@nxp.com>
-
-MACHINEOVERRIDES =. "mx6:mx6q:"
-
-require conf/machine/include/imx6sabreauto-common.inc
-
-KERNEL_DEVICETREE = "imx6qp-sabreauto.dtb imx6qp-sabreauto-ecspi.dtb 
imx6qp-sabreauto-flexcan1.dtb \
-                     imx6qp-sabreauto-gpmi-weim.dtb"
-
-PREFERRED_PROVIDER_u-boot = "u-boot-imx"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"
-PREFERRED_PROVIDER_virtual/kernel = "linux-imx"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6qpsabreauto_config,sdcard"
-UBOOT_CONFIG[eimnor] = "mx6qpsabreauto_eimnor_config"
-UBOOT_CONFIG[nand] = "mx6qpsabreauto_nand_config,ubifs"
-UBOOT_CONFIG[spinor] = "mx6qpsabreauto_spinor_config"
-UBOOT_CONFIG[sata] = "mx6qpsabreauto_sata_config"
-UBOOT_CONFIG[mfgtool] = "mx6qpsabreauto_config"
diff --git a/conf/machine/imx6qpsabresd.conf b/conf/machine/imx6qpsabresd.conf
deleted file mode 100644
index 369d5b7d..00000000
--- a/conf/machine/imx6qpsabresd.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-#@TYPE: Machine
-#@NAME: NXP i.MX6Q Plus SABRE Smart Device
-#@SOC: i.MX6QP
-#@DESCRIPTION: Machine configuration for NXP i.MX6QP SABRE Smart Device
-#@MAINTAINER: Lauren Post <lauren.p...@nxp.com>
-
-MACHINEOVERRIDES =. "mx6:mx6q:"
-
-require conf/machine/include/imx6sabresd-common.inc
-
-KERNEL_DEVICETREE = "imx6qp-sabresd.dtb imx6qp-sabresd-btwifi.dtb 
imx6qp-sabresd-hdcp.dtb \
-                     imx6qp-sabresd-ldo.dtb imx6qp-sabresd-ldo-pcie-cert.dtb"
-
-PREFERRED_PROVIDER_u-boot = "u-boot-imx"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6qpsabresd_config,sdcard"
-UBOOT_CONFIG[sata] = "mx6qpsabresd_sata_config"
-UBOOT_CONFIG[mfgtool] = "mx6qpsabresd_config"
diff --git a/conf/machine/imx6qsabreauto.conf b/conf/machine/imx6qsabreauto.conf
deleted file mode 100644
index e419c5d4..00000000
--- a/conf/machine/imx6qsabreauto.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-#@TYPE: Machine
-#@NAME: NXP i.MX6Q SABRE Automotive
-#@SOC: i.MX6Q
-#@DESCRIPTION: Machine configuration for NXP i.MX6Q SABRE Automotive
-#@MAINTAINER: Daiane Angolini <daiane.angol...@nxp.com>
-
-MACHINEOVERRIDES =. "mx6:mx6q:"
-
-require conf/machine/include/imx6sabreauto-common.inc
-
-KERNEL_DEVICETREE = "imx6q-sabreauto.dtb imx6q-sabreauto-gpmi-weim.dtb 
imx6q-sabreauto-ecspi.dtb \
-                     imx6q-sabreauto-flexcan1.dtb imx6q-sabreauto-enetirq.dtb"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6qsabreauto_config,sdcard"
-UBOOT_CONFIG[eimnor] = "mx6qsabreauto_eimnor_config"
-UBOOT_CONFIG[nand] = "mx6qsabreauto_nand_config,ubifs"
-UBOOT_CONFIG[spinor] = "mx6qsabreauto_spinor_config"
-UBOOT_CONFIG[sata] = "mx6qsabreauto_sata_config"
-UBOOT_CONFIG[mfgtool] = "mx6qsabreauto_config"
diff --git a/conf/machine/imx6qsabresd.conf b/conf/machine/imx6qsabresd.conf
deleted file mode 100644
index ea9119a9..00000000
--- a/conf/machine/imx6qsabresd.conf
+++ /dev/null
@@ -1,17 +0,0 @@
-#@TYPE: Machine
-#@NAME: NXP i.MX6Q SABRE Smart Device
-#@SOC: i.MX6Q
-#@DESCRIPTION: Machine configuration for NXP i.MX6Q SABRE Smart Device
-#@MAINTAINER: Otavio Salvador <ota...@ossystems.com.br>
-
-MACHINEOVERRIDES =. "mx6:mx6q:"
-
-require conf/machine/include/imx6sabresd-common.inc
-
-KERNEL_DEVICETREE = "imx6q-sabresd.dtb imx6q-sabresd-ldo.dtb 
imx6q-sabresd-hdcp.dtb \
-                     imx6q-sabresd-enetirq.dtb imx6q-sabresd-btwifi.dtb"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6qsabresd_config,sdcard"
-UBOOT_CONFIG[sata] = "mx6qsabresd_sata_config"
-UBOOT_CONFIG[mfgtool] = "mx6qsabresd_config"
diff --git a/conf/machine/imx6solosabreauto.conf 
b/conf/machine/imx6solosabreauto.conf
deleted file mode 100644
index 09997c33..00000000
--- a/conf/machine/imx6solosabreauto.conf
+++ /dev/null
@@ -1,21 +0,0 @@
-#@TYPE: Machine
-#@NAME: NXP i.MX6Solo SABRE Automotive
-#@SOC: i.MX6S
-#@DESCRIPTION: Machine configuration for NXP i.MX6Solo SABRE Automotive
-
-MACHINEOVERRIDES =. "mx6:mx6dl:"
-
-require conf/machine/include/imx6sabresd-common.inc
-
-KERNEL_DEVICETREE = "imx6dl-sabreauto.dtb"
-
-PREFERRED_PROVIDER_u-boot = "u-boot-imx"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"
-KERNEL_IMAGETYPE = "zImage"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6solosabreauto_config,sdcard"
-UBOOT_CONFIG[eimnor] = "mx6solosabreauto_eimnor_config"
-UBOOT_CONFIG[nand] = "mx6solosabreauto_nand_config,ubifs"
-UBOOT_CONFIG[spinor] = "mx6solosabreauto_spinor_config"
-UBOOT_CONFIG[mfgtool] = "mx6solosabreauto_config"
diff --git a/conf/machine/imx6solosabresd.conf 
b/conf/machine/imx6solosabresd.conf
deleted file mode 100644
index 65155bcc..00000000
--- a/conf/machine/imx6solosabresd.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-#@TYPE: Machine
-#@NAME: NXP i.MX6Solo SABRE Smart Device
-#@SOC: i.MX6S
-#@DESCRIPTION: Machine configuration for NXP i.MX6Solo SABRE Smart Device
-#@MAINTAINER: Otavio Salvador <ota...@ossystems.com.br>
-
-MACHINEOVERRIDES =. "mx6:mx6dl:"
-
-require conf/machine/include/imx6sabresd-common.inc
-
-KERNEL_DEVICETREE = "imx6dl-sabresd.dtb imx6dl-sabresd-ldo.dtb"
-
-PREFERRED_PROVIDER_u-boot = "u-boot-imx"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"
-KERNEL_IMAGETYPE = "zImage"
-
-UBOOT_CONFIG ??= "sd"
-UBOOT_CONFIG[sd] = "mx6solosabresd_config,sdcard"
-UBOOT_CONFIG[mfgtool] = "mx6solosabresd_config"
diff --git a/conf/machine/imx6sxsabreauto.conf 
b/conf/machine/imx6sxsabreauto.conf
index b3bae2a4..19a8d9f8 100644
--- a/conf/machine/imx6sxsabreauto.conf
+++ b/conf/machine/imx6sxsabreauto.conf
@@ -6,7 +6,8 @@
 
 MACHINEOVERRIDES =. "mx6:mx6sx:"
 
-require conf/machine/include/imx6sabreauto-common.inc
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa9.inc
 
 KERNEL_DEVICETREE = "imx6sx-sabreauto.dtb imx6sx-sabreauto-m4.dtb"
 
@@ -18,3 +19,9 @@ UBOOT_CONFIG[sd] = "mx6sxsabreauto_config,sdcard"
 UBOOT_CONFIG[qspi1] = "mx6sxsabreauto_qspi1_config"
 UBOOT_CONFIG[nand] = "mx6sxsabreauto_nand_config,ubifs"
 UBOOT_CONFIG[mfgtool] = "mx6sxsabreauto_config"
+
+SERIAL_CONSOLE = "115200 ttymxc3"
+
+MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
+
+MACHINE_FEATURES += " pci wifi bluetooth"
diff --git a/conf/machine/imx6sxsabresd.conf b/conf/machine/imx6sxsabresd.conf
index d702bed7..f7946361 100644
--- a/conf/machine/imx6sxsabresd.conf
+++ b/conf/machine/imx6sxsabresd.conf
@@ -6,7 +6,8 @@
 
 MACHINEOVERRIDES =. "mx6:mx6sx:"
 
-require conf/machine/include/imx6sabresd-common.inc
+require conf/machine/include/imx-base.inc
+require conf/machine/include/tune-cortexa9.inc
 
 KERNEL_DEVICETREE = "imx6sx-sdb.dtb imx6sx-sdb-emmc.dtb imx6sx-sdb-m4.dtb \
                      imx6sx-sdb-sai.dtb imx6sx-sdb-lcdif1.dtb 
imx6sx-sdb-ldo.dtb \
@@ -19,3 +20,9 @@ UBOOT_CONFIG[emmc] = "mx6sxsabresd_emmc_config,sdcard"
 UBOOT_CONFIG[qspi2] = "mx6sxsabresd_qspi2_config"
 UBOOT_CONFIG[m4fastup] = "mx6sxsabresd_m4fastup_config"
 UBOOT_CONFIG[mfgtool] = "mx6sxsabresd_config"
+
+SERIAL_CONSOLE = "115200 ttymxc0"
+
+MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
+
+MACHINE_FEATURES += " pci wifi bluetooth"
diff --git a/conf/machine/include/imx6sabreauto-common.inc 
b/conf/machine/include/imx6sabreauto-common.inc
deleted file mode 100644
index b4f37b3c..00000000
--- a/conf/machine/include/imx6sabreauto-common.inc
+++ /dev/null
@@ -1,10 +0,0 @@
-# Provides the i.MX6 SABRE AUTO common settings
-
-require conf/machine/include/imx-base.inc
-require conf/machine/include/tune-cortexa9.inc
-
-SERIAL_CONSOLE = "115200 ttymxc3"
-
-MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
-
-MACHINE_FEATURES += " pci wifi bluetooth"
diff --git a/conf/machine/include/imx6sabresd-common.inc 
b/conf/machine/include/imx6sabresd-common.inc
deleted file mode 100644
index 40e3cde6..00000000
--- a/conf/machine/include/imx6sabresd-common.inc
+++ /dev/null
@@ -1,10 +0,0 @@
-# Provides the i.MX6 SABRE SD common settings
-
-require conf/machine/include/imx-base.inc
-require conf/machine/include/tune-cortexa9.inc
-
-SERIAL_CONSOLE = "115200 ttymxc0"
-
-MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
-
-MACHINE_FEATURES += " pci wifi bluetooth"
diff --git a/recipes-bsp/u-boot/u-boot-fslc-mxsboot_2016.09.bb 
b/recipes-bsp/u-boot/u-boot-fslc-mxsboot_2017.07.bb
similarity index 87%
rename from recipes-bsp/u-boot/u-boot-fslc-mxsboot_2016.09.bb
rename to recipes-bsp/u-boot/u-boot-fslc-mxsboot_2017.07.bb
index 86a6abf2..f1da0e84 100644
--- a/recipes-bsp/u-boot/u-boot-fslc-mxsboot_2016.09.bb
+++ b/recipes-bsp/u-boot/u-boot-fslc-mxsboot_2017.07.bb
@@ -5,10 +5,10 @@ SECTION = "bootloader"
 DEPENDS = "openssl"
 PROVIDES = "u-boot-mxsboot"
 
-PV = "v2016.09+git${SRCPV}"
+PV = "v2017.07+git${SRCPV}"
 
-SRCREV = "a3d27ead69a9e84a7794117cf965af20d0cfec4f"
-SRCBRANCH = "2016.09+fslc"
+SRCREV = "fc1d8ff897c52ae7d0187d8dd2fd5aee4597615a"
+SRCBRANCH = "2017.07+fslc"
 
 SRC_URI = "git://github.com/Freescale/u-boot-fslc.git;branch=${SRCBRANCH}"
 
diff --git a/recipes-bsp/u-boot/u-boot-fslc_2017.03.bb 
b/recipes-bsp/u-boot/u-boot-fslc_2017.03.bb
deleted file mode 100644
index ce62e53a..00000000
--- a/recipes-bsp/u-boot/u-boot-fslc_2017.03.bb
+++ /dev/null
@@ -1,6 +0,0 @@
-include u-boot-fslc.inc
-
-PV = "v2017.03+git${SRCPV}"
-
-SRCREV = "ac3b20cdbe5282fbfa46d7fd39358f5ee07e24d9"
-SRCBRANCH = "2017.03+fslc"
diff --git a/recipes-bsp/u-boot/u-boot-fslc_2017.07.bb 
b/recipes-bsp/u-boot/u-boot-fslc_2017.07.bb
new file mode 100644
index 00000000..e5aed824
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-fslc_2017.07.bb
@@ -0,0 +1,6 @@
+include u-boot-fslc.inc
+
+PV = "v2017.07+git${SRCPV}"
+
+SRCREV = "fc1d8ff897c52ae7d0187d8dd2fd5aee4597615a"
+SRCBRANCH = "2017.07+fslc"
-- 
2.13.2

-- 
_______________________________________________
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

Reply via email to