I pushed following updates:

commit b5c351ee708053fbc3f29d3b54c011f63d6a5319 (HEAD -> pending, 
yocto/master-next, yocto/master)
Author: Otavio Salvador <ota...@ossystems.com.br>
Date:   Mon Jul 10 12:04:58 2017 -0300

    u-boot-fslc: Upgrade to 2017.07-based release
    This release provides a huge improvement regarding the support for SPL
    to more boards.
    We now uses this and migrated following boards:
     - imx6qpsabresd -> imx6qdlsabresd
     - imx6qsabresd -> imx6qdlsabresd
     - imx6dlsabresd -> imx6qdlsabresd
     - imx6solosabresd -> imx6qdlsabresd
     - imx6qpsabreauto -> imx6qdlsabreauto
     - imx6qsabreauto -> imx6qdlsabreauto
     - imx6dlsabreauto -> imx6qdlsabreauto
     - imx6solosabreauto -> imx6qdlsabreauto
    So now, the 8 boards are covered by 2 machine files. This drastically
    reduces the build time and allow for a better user experience as we
    can use the same image to test different boards.
    In summary an image built for imx6qdlsabresd or imx6qdlsabreauto is
    capable of run on a its respective board which contains a i.MX6
    QuadPlus, Quad, Dual, DualLite or Solo SoC removing the need of a
    specific image for each SoC type.
    On top of the official 2017.07 release, following patches are
    801fd44563 mx6sabreauto: Make Ethernet functional again
    8ccb1970b8 wandboard: Set fdt based on board_rev and board_name
    e6605743e5 mx6sabresd: Enable video interfaces in bootargs
    e50a2475d4 mx6sabresd: Use LDO dtb file until LDO bypass support is added
    b1a4715311 mx6slevk: Use LDO dtb file until LDO bypass support is added
    957409876b imx: cx9020: try pxe boot, if no vmlinuz on mmc
    3608315bf1 imx: cx9020: use fdt_addr_r and ramdisk_addr_r
    9a1c960516 mx6sabreauto: Add Falcon mode support
    3a279e5fe8 warp: Use PARTUUID to specify the rootfs location
    0f9a6703e7 embestmx6boards: Use PARTUUID to specify the rootfs location
    c877510614 mx6cuboxi: Use PARTUUID to specify the rootfs location
    0ada2d6caf wandboard: Use PARTUUID to specify the rootfs location
    eee442362c mx6sabre: Use PARTUUID to specify the rootfs location
    80a56615fa mx6sabreauto: Do not enable WEIM by default
    321339efd7 imx: reorganize IMX code as other SOCs
    1567ce3edc mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
    40294f880d dm: mmc: fsl_esdhc: handle vqmmc supply
    0378edcd02 mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O
    3657cae890 mmc: fsl_esdhc: correct type of wp_enable
    45103e1030 imx6_spl: Add u-boot-dtb.img for SPL payload
    61131fa4b5 mx6sabreauto: Update to SPL only mode
    07a667be9b mx6qsabreauto: Add SPL support
    4506c859ee mx6cuboxi: Add support for sata
    a5c5962327 mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.
    4590f11b61 mx6: soc: Move mxs_dma_init() into the mxs nand driver
    10d185960e net: fec_mxc: fix PHY initialization bug with CONFIG_DM_ETH
    b2d4bf303e icorem6_rqs: Rename icorem6_rqs config file
    af34708e1e dt-bindings: Document the Broadcom STB wake-up timer node
    3e92667cfe serial: mxc: Add debug uart support
    4e2b31a5c5 serial: mxc: Code cleanup
    27835dae1a serial: mxc: Move common baud gen into _mxc_serial_setbrg
    1ca9fe11fd serial: mxc: Move common init into _mxc_serial_init
    14ac9d06be serial: mxc: Move cr1 and cr2 write to mxc_serial_setbrg
    fdd1f0debc serial: mxc: Use RFDIV in dm-code
    fd008b0569 serial: mxc: Add common mxc_uart reg space
    2fd7878124 imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL
    5c72de6152 ot1200: enable CONFIG_IMX_THERMAL for detailed thermal 
    8e38f54c56 mx6sabresd: Fix guard file symbol
    3320a872b0 wandboard: Remove unnecessary delay
    d5ae3ce6dd cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
    1325b822da cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
    844365a5a0 mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
    ff9e6d62ed mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
    Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>
    Acked-by: Daiane Angolini <daiane.angol...@nxp.com>
    Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>

commit c3a6be93645711d4a60267c7911b8676ecbef6e3
Author: Otavio Salvador <ota...@ossystems.com.br>
Date:   Tue Jul 11 14:59:53 2017 -0300

    linux-fslc-imx: Bump to 300a765 revision
    This merges the 4.1.15 2.1.0 GA release as well as the 4.1.42 stable
    Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>

commit 63985dc4a6fdbbc2fe53b289a5484110ee6f1d81
Author: Otavio Salvador <ota...@ossystems.com.br>
Date:   Mon Jul 10 12:01:12 2017 -0300

    alsa-lib: Ensure MACHINE_SOCARCH is used consistently
    The alsa-lib needs to apply the patches for all i.MX SoCs so using the
    'imx' override seems to be the best choice for this specific
    A missing aspect though was that this should also affect every package
    which /depends/ on alsa-lib (e.g: alsa-utils) so it also goes to
    MACHINE_SOCARCH architecture fixing the signature change across
    different machines.
    This fix has been tested using a massive parallel build using
    Signed-off-by: Otavio Salvador <ota...@ossystems.com.br>


Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
meta-freescale mailing list

Reply via email to