Hello Klaus, On Thu, Nov 2, 2017 at 11:21 AM, Klaus Anderson <[email protected]> wrote: > I'm fairly new to FSL yocto things, so bare with me if I'm asking silly > things.
That's fine. > I am using iMX6 SCM development kit and have so far been using instructions > from https://community.nxp.com/docs/DOC-333955, using > MACHINE=imx6dqscm-1gb-qwks-rev3. This works fine, but is based on morty, so > some of the sw is a bit old. It is indeed. > Now I would like to get a more recent yocto release (preferably rocko) > working with this hw, but I'm not entirely sure how to proceed. Just trying > to build a minimal image using master from fsl-community-bsp complains that > imx6dqscm-1gb-qwks-rev3 is not supported. Which machine should I pick > instead? Or do I need meta-nxp-imx-scm layer added > (http://git.freescale.com/git/cgit.cgi/imx/meta-nxp-imx-scm.git/) and go > from there? Or do I need to create my own machine configuration before > continuing? > > Ideally I would also want to use a more recent kernel, but can't find any > with mention for scm, so should I assume none is available? Or do the normal > imx kernels work with scm devices as well? > > Any advice or pointers would be greatly appreciated. It is not supported here, someone needs to prepare the patches. I am sorry. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
