Hello, I pushed following updates:
commit 3fc4458fd822a7b3843bc69732367b717947e76b (HEAD -> master, fslc/rocko, fslc/master-next, fslc/master) Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:14 2017 +0100 colibri-vf.conf: add a wic image in favour of sdcard image The wic image can be used to boot kernel/dtb/rootfs from an SD card. U-Boot gets booted from the on module NAND, the image from the prepared SD card. zcat XXX.rootfs.wic.gz | dd of=/dev/sdX bs=1M Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 26bec0011df51990348cac6c243263d5770b4874 Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:13 2017 +0100 colibri-vf.conf: add a device tree for the aster carrier board Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit c44904d9c8854cdddd0544ded79986bd81a69b58 Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:12 2017 +0100 colibri-imx7.conf: add a wic image in favour of sdcard image The wic image can be used to boot kernel/dtb/rootfs from an SD card. U-Boot gets booted from the on module NAND, the image from the prepared SD card can be started with 'run sdboot'. zcat XXX.rootfs.wic.gz | dd of=/dev/sdX bs=1M Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 9202f5fa7fbec71fb6019d96c6c83f2e84d72c77 Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:11 2017 +0100 colibri-imx7.conf: add device tree for the aster carrier board Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 0b9af1e0598c26f762963bff82e03f7ccc7243db Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:10 2017 +0100 colibri-imx6.conf: add a wic image in favour of sdcard image The wic image can be used to boot kernel/dtb/rootfs from an SD card. U-Boot gets booted from the on module eMMC, the image from the prepared SD card can be started with 'run sdboot'. zcat XXX.rootfs.wic.gz | dd of=/dev/sdX bs=1M Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 8e30e894541de3889949de3d3cc3ab4a8b9e09fd Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:09 2017 +0100 colibri-imx6.conf: add device trees for aster and use-mainline-bsp Add a device tree for the Aster carrier board. Add the device tree available in mainline for use with the use-mainline-bsp override. While at it unify the @SOC description variable with other boards. Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit f5707489520f46837cd8fc447d7e9c750e9d4a1a Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:08 2017 +0100 colibri-imx6.conf: do not deploy the kernel in the rootfs The kernel is taken from a separate fat partition in the regular boot process, so there is no need to deploy it in the rootfs. Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 5e2b946de0dbd69f9b21f87685cb781ccbec729f Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:07 2017 +0100 colibri-imx6.conf: build a spl u-boot U-Boot is now used with SPL, set the machine conf file accordingly. Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit c0036cd7464c0fa3b0aa31d62a7e786d1eb2a203 Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:06 2017 +0100 apalis-imx6.conf: add a wic image in favour of sdcard image The wic image can be used to boot kernel/dtb/rootfs from an SD card. U-Boot gets booted from the on module eMMC, the image from the prepared SD card can be started with 'run sdboot'. zcat XXX.rootfs.wic.gz | dd of=/dev/sdX bs=1M Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit bbc134ef5d52e5c19e5a14342a48e111ba784e9c Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:05 2017 +0100 apalis-imx6.conf: add device trees for ixora and use-mainline-bsp Add a device tree for the Ixora carrier board. Add the device tree available in mainline for use with the use-mainline-bsp override. While at it unify the @SOC description variable with other boards. Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit e1e53bf54491227a8b9345629d09c3d72244a750 Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:04 2017 +0100 apalis-imx6.conf: do not deploy the kernel in the rootfs The kernel is taken from a separate fat partition in the regular boot process, so there is no need to deploy it in the rootfs. Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit b5f9ee90d80223cfd2a86c124e5ee636d143611f Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:03 2017 +0100 apalis-imx6.conf: build a spl based u-boot U-Boot is now used with SPL, set the machine conf file accordingly. Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 022d9c66729e9e3b6fa41bcdf77d1c0dd016e88f Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:02 2017 +0100 u-boot-toradex: update to 2016.11, update to toradex bsp 2.7.4 For the i.MX6 based modules move to boot with SPL to setup the DDR RAM. Add use-mainline-bsp to compatible machine to allow building this U-Boot also when 'use-mainline-bsp' is built. (In which case the e.g. mx6 override is dropped) License: changed by the following upstream commits, all of which do not affect our configurations. 0f4d2f8e79 License: Add the Open Font License (ttf fonts) 40a39e875c SPDX: add X11 SPDX-License-Identifier (preparation for dual licensed device trees) 4dcd9a65d4 Licenses: fix a typo in README changes to non NXP boards not in list initial commits for colibri-imx6ull and colibri-imx7-emmc not in list 69cc681 lib/bch.c: modify algorithm for all writebcb users 595c178 mtd: nand: mxs_nand: support chips without ONFI/JEDEC parameter page d5efded apalis/colibri_imx6: fix white space cd255bc colibri_imx7: get rid of environment in mmc option ca92211 colibri_imx7: clean-up config header file ae968c6 apalis/colibri: fix and synchronize mount options 4370811 colibri_imx7: improve DDR3 timing 7e64e5f toradex: remove ISO partition support 16d2bc5 disk: part: align buffer so it can be used with DMA enabled drivers 84fe4a7 MLK-13140 ARM: imx: update REFTOP_VBGADJ according to fuse setting 1d86d85 MLK-13124 ARM: imx: update the REFTOP_VBGADJ setting 756bc8f imx6ull: cherry-pick remaining stuff from 05922b0 ab546ab MLK-12766 net: fec: do not access reserved register for i.MX6ULL 09983d0 MLK-12486-1: switch to use setup_gpmi_io_clk for i.MX6UL 6d6a643 MLK-12883 usb: limit USB_MAX_XFER_BLK to 256 4e1c703 tdx-cfg-block: add new sku's 6bd94c8 colibri_imx7: remove unused config option ab71667 colibri_imx7.h: do not deploy nand torture cmd 341064e net: Use packed structures for networking c0d5002 configs: apalis-tk1: Use ext4 file system by default 51b53b4 colibri-vf: sync the board info message 3e72538 toradex: common: unify behaviour when config block is missing 3ef2146 colibri_imx6: use SDP if USB serial downloader has been used 4fcacc1 apalis_imx6: use SDP if USB serial downloader has been used 80c3bd6 imx_common: detect USB serial downloader reliably 0d06911 imx: add macro to detect whether USB has been initialized a2e77a6 colibri_imx7: use SDP if USB serial downloader has been used e05589d imx: imx7: detect USB serial download protocol boot mode 3f4cddb imx: imx7: make get_boot_device available for board files 23b5f7c colibri_imx7: carve out PMD aligned amount of memory 47ac8bf toradex: configblock: add an -y parameter to 'cfgblock create’ cb3d672 configs: apalis_imx6: Use ext4 file system by default 615de72 configs: colibri_imx6: Use ext4 file system by default Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 85b9830c91310f8e10b0ec68c76efdd69739f03b Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:01 2017 +0100 linux-toradex_4.1-2.0.x: imx, update to toradex bsp 2.7.4 Update the kernel for a fslc-imx 4.1-2.0.x based kernel for Apalis/Colibri iMX6 and Colibri iMX7. This replaces the linux-toradex_3.14.52 and linux-toradex_4.1.15 kernels, thus remove the recipes and their related files. Add a superset of the machine specific defconfigs in the kernel tree as the defconfig. The following changes on top of fslc "Merge tag 'v4.1.39' into 4.1-2.0.x-imx": - Patches for bsp 2.7.3 as listed below - Merge to upstream patchlevel fslc/4.1-2.0.x-imx @ 4.1.44 - Patches for bsp 2.7.4 as listed below - Added initial support Colibri iMX6ULL and Colibri iMX7 Dual 1GB (eMMC) without the machine specific device-trees or defconfigs commits.: with bsp 2.7.4 * b893ccb toradex defconfigs: synchronize with defconfigs in oe * 3e11eb1 colibri_imx7_defconfig: add atmel-mxt-ts as a module * f5f2907 ARM: dts: imx7-colibri: add atmel mxt multitouch controller * e747c0e ARM: dts: colibri-imx7: add new gpio hog grp * 269dba3 colibri_imx6_defconfig: add atmel-mxt-ts as a module * b9aae76 ARM: dts: imx6dl-colibri: add atmel mxt multitouch controller * de3fd44 apalis_imx6_defconfig: add atmel-mxt-ts as a module * 98b9c18 ARM: dts: imx6qdl-apalis: add atmel mxt multitouch controller * bce5146 ARM: imx: clk: enable OCOTP clock by default * d96c255 imx6ull.dtsi: include all needed definitions * c8f0033 mtd: gpmi: fsl,legacy-bch-geometry independent of nand-on-flash-bbt * 7b02a99 imx: Fix 'Expose SoC unique ID' for newer i.MX6 * 4e35498 imx6dl-colibri-eval-v3: fix weim node * 090138a regulator: pfuze100: Apalis iMX6: Fix poweroff does not release POWER_ENABLE_MOCI * c4d5e86 apalis_imx6: update defconfig for wifi * 837a89e ip6_offload: fix compiler warning * 4105f39 of: fdt: fix compiler warning * 4b20a89 mtd: blkdevs: fix switch-bool compilation warning * c595a9e mtd: fsl-quadspi: fix macro collision problems with READ/WRITE" * 6fe6616 Revert "mtd: fsl-quadspi: fix macro collision problems with READ/WRITE" with bsp 2.7.3 * 3f68dc7 busfreq-imx: only use existing global variables * 22eb8a9 Revert "cpufreq: imx7: fix undefined reference to arm_reg and soc_reg" * 38524d7 Documentation: fix imx7d pinctrl dse config bits * 71d7b33 imx7d-colibri: limit to 800 mhz and 1 ghz operating points * b339205 imx7s: add mandatory 800 mhz operating point * 22db6be video: fbdev: mxsfb: allow setting display timings via kernel command line * a6563bd cpufreq: imx7: fix undefined reference to arm_reg and soc_reg * 9262956 dts: imx7d: move operating points to i.MX 7Dual device tree * 50e26af mxc_ipuv3_fb: Use the mode_string from command line as is * d826eb4 ov5640_mipi: Revert the hack * a5c56b9 ARM: dts: imx6qdl-apalis-ixora: Enable ADV7280 decoder on Ixora * b8e5d21a tty: serial: imx: Add support for enabling RS485 via device tree * a8e0d43 ARM: imx: spare the first 16KiB of OCRAM_S for Cortex-M4 * a2130af sgtl5000: improve switch on vag power for line_in -> output * b48a96a ARM: dts: colibri imx6: configure an external sgtl5000 vddd source * d21fcda ARM: dts: apalis imx6: configure an external sgtl5000 vddd source * 40fbb01 ARM: dts: colibri imx6: increase sgtl5000 lrclk drive strenght * 87f6630 ASoC: sgtl5000: Allow LRCLK pad drive strength to be changed * 1a3c9b3 ASoC: sgtl5000: add headphone and LINEOUT mute controls * 8929d0a sgtl5000: add Lineout volume control * 81fba3f ASoC: sgtl5000: Do not disable regulators in SND_SOC_BIAS_OFF * 66a04e9 ASoC: sgtl5000: Disable internal PLL early * 85436af ASoC: sgtl5000: Initialize CHIP_ANA_POWER to power-on defaults * 51bc42e ASoC: sgtl5000: Write all default registers * 4523526 ASoC: sgtl5000: Fix regulator support * 4859c2e90 ASoC: sgtl5000: Remove misleading comment * abbdc0a ASoC: sgtl5000: fix VAG power up timing * 198628d ASoC: sgtl5000: fix error message output for MicBias voltage * 912e038 ASoC: sgtl5000: Replace direct snd_soc_codec dapm field access * ae56e9d ASoC: sgtl5000: Calculate Lineout Channel Output Level * 3db63e2 ASoC: sgtl5000: Use specific variable for lo_vag * f972815 net: can: flexcan: Fix wakeup on CAN from suspend issue * b6798bb iio: adc: remove event advertisment * 7a751b2 iio: adc: support IIO_CHAN_INFO_SCALE * 051ee1a1 apalis-imx6: use stopmode for poweroff * 8949147 pm-imx6.c: fix power off by stop mode * 29ff238 colibri-imx6: use stopmode for poweroff * 94a53ed net: fec: don't transfer ownership until descriptor write is complete * c15a4c3 rtc: ds1307: support m41t0 variant * 3e3ea9b sgtl5000: switch on vag power for line_in -> output * 091594e iio: adc: fix remove * 4bac3c9 mmc: sdio: add forward declaration for struct mmc_host * a86db1f ARM: imx: mu: let Cortex-M4 know about A7 state * 98adbba ARM: imx: clk: do not force clock frequency of M4 * 9e05354 ARM: imx: busfreq: do not force high frequency during suspend * 70f901b ARM: imx: busfreq: initialize M4 frequency depending boot state * 3e92301 ARM: imx: busfreq: request bus frequency depending on M4 clock * 0666dae arm: dts: imx7: specify Cortex-M4 clock * c663470 mmc: sdhci-esdhc-imx: make sure runtime PM is suspended in system suspend * 2df675a mtd: gpmi: make sure runtime PM is suspended in system suspend * ebf4565 video: fbdev: mxsfb: make sure runtime PM is suspended in system suspend * a2ccbd2 net: fec: make sure runtime PM is suspended in system suspend * 5ced941 imx_thermal.c: set trip point depending on temp grade * 9090b5b imx: Expose SoC unique ID * 8a098f2 drivers: soc: Add new sysfs attribute to expose SoC unique ID * 36df4e2 arm: dts: imx7: specify keypad port clock * 7b51b63 ARM: imx7d: clk: add root clock for keypad port * 506993e rpmsg: use _debug variants for print_hex_dump * 5aba75e rpmsg: imx: do not push data when no reader is available * cade8f64 hexdump: do not print debug dumps for !CONFIG_DEBUG * 1db9a16 ARM: imx: define buffer count per VirtIO queue * 4cfa939 gpio: mxc: clear interrupt mask/status optionally * 25b9f89 ARM: imx: remove 'unused' warning * 257fabb tty: serial: imx: disable DCD and RI interrupts * c784a4d imx6qdl.dtsi: include bindings gpio.h * 735d4f8 video: mxc: ldb: Add support for LVDS configuration via kernel boot arguments * 558d378 colibri_imx6:Add MCP2515 SPI CAN controller to DT * 7df8a0f media: Add support for ADV7280 decoder driver * 358a46a mxc_v4l2_capture: Change error message to print on debug * 80aae0b mxc_v4l2_capture: Allow clock setting for de-interlaced video input * 0d85191 tty: serial: imx: disable DCD and RI interrupts * 8ddc702 PCI: Apalis GEN1 forcing quirk * 826486c PCI: imx6: fix PCIe EP device self-initialisation * e00c546 process.c: if power off fails, do at least a halt * be63e27 Input: sentelic - use "static inline" instead of "inline" * b28f212 mxc_v4l2_capture.c: make error messages unique * d7357aa ipu_csi_enc.c: fix debug print * 4e1e8d2 max9526.c: move pinctrl after i2c detect * 638f43c adv7180.c: convert debug output to dev_dbg * 67c0d5a2 dtb, i2c-imx.txt: fix typos * 1ce23b6 mxc_v4l2_capture: match ipu/csi/mipi instead of only ipu/csi * c5954c2 max9526: add initial MXC camera sensor code * df76b16 adv7180.c: initial working adv7180 settings * 518d4ee mxc_v4l2_capture: let the camera driver set mipi/parallel * 62785df pci-imx6: fix reboot bug * d2e0de0 mxc_hdmi.c: fix boot hang * cec9878 extcon: usb-gpio: increase debounce time * 1fe0cf4 mxc_lcdif.c: fix comment * 912f823 mxc_v4l2_capture: add mxc_camera_common_lock/unlock, fix device name * 502376a MXC_CSI_CAMERA: select VIDEOBUF2_DMA_CONTIG * 691204a clk-imx6q.c: set eth phy clock dependent on RMII/RGMII * bea0575 mach-imx6q.c: handle RESET_MOCI when PCIe is disabled * 78d5ad8 mxc_hdmi.c: remove compiler warning * 2d67c55 mxc_hdmi: fix detect disconnect case * b34325c OmniVision ov5640 MIPI-CSI2 camera support * b548028 i2c-imx: add gpio recovery functionality * fc0d0a2 pcie-imx6: improve reset function for reseting EP * 557f0276 pcie-imx6: add reset function for reseting downstream EP * b0e8865 mach-imx6q.c: fix typo in error msg * 0bcaad8 mxc_vdacif.c: add second parallel output used for VDAC * f069491 pci-imx6.c: add config option to force GEN1 speed * e4d913a iio:stmpe-adc.c: Switch to new event config interface * af6cf45 vgaarb.c: demote pr_err about vga device to pr_debug * 4e6509c mxc_lcdif.c: add additonal LCD timings * 849f2e7 pci-imx6.c: remove compiler warning * 85aff64 mxc_lcdif.c: EDT-WVGA: fix pixelclk polarity * f6620779 mxc_hdmi: skip unnecessary mxc_hdmi_setup calls * c73cb81 sync.h: synchronization framework needs this header * d39b4cf arm: imx6: fix pcie by disabling rc/ep test mode * 7435612 stmpe-adc: add temperature channel * 6f88e1d stmpe-adc: add device tree bindings * 6b542ac iio: adc: add STMPE ADC driver using IIO framework * d5c4b1b mfd: stmpe: add ADC block resources * 3b99e8c mach-types: add the apalis-imx6 machine * 6a315fa lcd: Add WVGA timings for the EDT 7.0" panel * 6ff9133 mxc_spdif.c: set the validity bit to 'valid' * 25c2bbc eMMC: Don't initialize partitions on RPMB flagged areas. * d2aa5b3 tc358743_h2c: add devicetree support * 97662d8 TC358743 Kconfig dependency update * e966a0b tc358743_h2c: fill in sample edid data from Asus monitor * fa98ab8 tc358743_h2c: fix compiler warnings * 1ae41be tc358743_h2c: cleanup spacing * cb8232e add tc358743_h2c driver * 3bb87f2 sdhci: print opcode/retries on timeout error * a26957b ov5640_mipi: software reset does not affect i2c address * f157011 ipu_common: ipu_free_irq, do nothing if not owner * 916ed1f ipu_csi_enc: improve error message * 439ea46 ipu_prp_enc: improve error message * cd35b25 ov5642: fix csi/ipu check for imx6dl * 388605f ov5640_mipi: fix csi/ipu check for imx6dl * 07bd62d ov5642: add i2c address change feature * 73924ed0 ov5640_mipi: add i2c address change feature * 12749a2 mxc_mipi_csi2: add ipu/csi info to probed output * 9ffb829 ov5640_mipi: change registered name from ov5640 to ov5640_mipi to reduce confusion * 98963d0 i.MX6: v4lout: none of our displays support color-space conversion * f657dc3 dma-mapping: increase DEFAULT_DMA_COHERENT_POOL_SIZE ifdef CONFIG_VIDEO_TW68 * 41feae5 PCI: Add quirk for setting valid class for TW6869 frame grabber * d69533a mxc_hdmi: Add only_cea parameter to mxc_hdmi module * 5969e2c rfkill-regulator: add dt support * 66d9883 ov5640_mipi: simplify mipi clock wait loop * 04abce7 mxc_hdmi: enable overflow interrupt after initialization complete * de5231f mxc_hdmi: default to keep-alive (don't detect disconnect) * 51394b5 Add support for DVI monitors * 4898869 ov5640_mipi: print message on gpio request failure * e2954c5 mxc_v4l2_capture: add ipu_id to sensor_data * af79b8b ov5640_mipi: add remove *2 and add error checking to OV5640_get_sysclk * a03ab41 ov5640_mipi: add imx6 mipi/parallel selection * 4f704da ov5640: add pwm option for mclk * 81cf941 ov5642: add imx6 mipi/parallel selection * ede1722 fix camera power down * 6c4f140 add ar1021 touchscreen * bc387b6 mxc_v4l2_capture: fix VIDIOC_ENUMSTD, return -EINVAL if index > 0 * 89a914b mxc_ipuv3_fb: unblank displays at init * a1b1b16 ARM: imx: adjust vring location to be at 256MB boundary * 8227a8a arm: dts: imx7: decrease DMA CMA to 128MB * 4af562c ARM: imx7d: clk: add 240MHz sys main clock to init_on * 1f43d37 usb: chipidea: Use extcon framework for ID and VBUS detection * 24bd9a5 arm: dts: imx7: Add support for PWM polarity control * e32dd66 pwm: imx: Add support for polarity control * 10a6f7d cpufreq: imx7: don't support OPP table from platform data * 46c52bd video: fbdev: mxsfb: honor native-mode * b03cdd9 video: mxsfb: simplify parsing * f3d8abf Revert "sgtl5000.c: HACK, defer probe when I2C not yet running" * 967986f touchscreen: fusion_F0710A: Reset controller if clear interrupt operation fails * d4afe65 input: touchscreen: fusion: implement multitouch with slot handling * 5be4f48 input: touchscreen: fusion: use level triggered interrupt * fbfa23b input: touchscreen: fusion: add device tree integration * 02411ee input: touchscreen: fusion: platform independent GPIO description * fd92393 input: touchscreen: fusion: fix error handling * 808f8b9 input: touchscreen: fusion: use new I2C PM functions * ef32550 input: touchscreen: added platform data for Fusion touchscreen * 3e2c068 input: touchscreen: fix race condition in Fusion driver * ac9343d input: touchscreen: add ABS_X/ABS_Y axis for Fusion touchscreen * a9fc7d5 input: touchscreen: add Fusion 7 and 10 multi-touch driver * e2d1fdb fbcon: logo: allow easy integration of a custom Linux boot logo * 49f0b58 spi: spidev: invent a new hw device to work around spidev warning * bcdfec9 ARM: imx: fix clock for i.MX 7 when Cortex-M4 is running * 8693a14 pinctrl: pinctrl-imx: add support for LPSR GPR padctrl * ea2ea01 mfd: rn5t618: register restart handler * a7b0e5f mfd: add Ricoh RN5T567 PMIC suppport * 675e67c drivers/dma/Kconfig: allow MXS_DMA for i.MX 7 * d68621a regulator: rn5t618: allow GPIO 0 to be used for an enable signal * f0e41d7 ENGR00305648-1 ASoC: imx-sgtl5000: Support non-ssi cpu-dai * f992a95 video: fbdev: mxsfb: fix pixelclock polarity * d46df08 mach-imx7d.c: use enet_out clk to decide on PHY clock * 68bf174 Input: ad7879 - add device tree support * 63339e0 Input: ad7879 - fix default x/y axis assignment * d1a439e Input: ad7879 - move header to platform_data directory * 0adde3f ARM: imx: enet1: output reference clock * 633a4e1 video: mxsfb: add compile dependencies * f4c63ec chipidea: make usb charger optional * c8b53a4 regulator: rn5t618: Add RN5T567 PMIC support Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 51fc09ef08ef1579b6ff2096d860c656bf94ec8a Author: Max Krummenacher <[email protected]> Date: Wed Nov 8 16:54:00 2017 +0100 linux-toradex_4.4: vf, update to toradex bsp 2.7.4 - Merge to upstream patchlevel Linux 4.4.88 - Add Remote Processor Messaging (rpmsg) driver for Vybrid - Various other additions and fixes - Synchronize defconfig with kernel tree colibri_vf_defconfig Apart from the upstream patches the following commits were added: with bsp 2.7.4 * d152ae9 drm/panel: Add display timings for Logic LT161010-2NHC 7" panel * a8c098d colibri_vf_defconfig: add atmel-mxt-ts as a module * 274ea53 ARM: dts: vf-colibri: add Atmel MXT multitouch controller * dd2a698 ARM: dts: colibri-vf: add new gpio hog grp/s * 2829153 usb: chipidea: use of extcon framework to work for non OTG case * 1721e2f usb: chipidea: Consolidate extcon notifiers * de6cb89 Revert "usb: chipidea: Modify use of extcon framework to work for non OTG case" with bsp 2.7.3 * c1d5fe2 Merge tag 'v4.4.73' into toradex_vf_4.4-next * 0068a1b ARM: dts: vf-colibri-aster: Add support for Aster with Vybrid * f37e832 ARM: vf610: PM: Use device tree property to register power_off function * 3348e45 tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock * f9fc0f2 ARM: dts: imx: fix M41T0 RTC compatible string * 41e7fd5 rtc: ds1307: support m41t0 variant * 7cfa321 tty: serial: fsl_lpuart: lock port on console write * 00babbc ARM: dts: colibri-vf: use pull-down for USBC_DET pin * 8b06b41 tty: serial: fsl_lpuart: resync with 4.9 kernel * 837e5b8 Merge tag 'v4.4.59' into toradex_vf_4.4-next * 418f717 net: fsl_l2_switch: cleanup in remove callback * 86b0182 net: ethernet: freescale: allow vf610_l2_switch as module * fa64e12 net: fsl_l2_switch: drop registering phy in switch mode * cd2eb96 Merge tag 'v4.4.39' into toradex_vf_4.4-next * 56ffbfa spi: spi-fsl-dspi: Purge switch between EOQ and DMA mode * 90b6d21 ARM: dts: vfxxx: Enable DMA for DSPI2 and DSPI3 * e2d03ba spi: spi-fsl-dspi: Fix incorrect freeing of DMA allocated buffers * 9b02266 spi: spi-fsl-dspi: Fix continuous selection format * 529dcc0 spi: spi-fsl-dspi: Fix incorrect DMA setup * de55e33 spi: spi-fsl-dspi: Fix SPI transfer issue when using multiple SPI_IOC_MESSAGE * 3356fd1 spi: spi-fsl-dspi: Fix data corruption for 1K transfers or more * e1ce49e drm/fsl-dcu: introduce kernel parameter to specify fbdev depth * 93fb63a ARM: configs: colibri_vf: configure IPv6 SIT driver as module * 4a8d085 sdhci-esdhc-imx: fix bus-width for 1-bit operation. * 3816bd7 ARM: vf610: PM: register power_off function * 7ccb5e5 usb: chipidea: implement platform shutdown callback * 1cb2765 drm/fsl-dcu: disable CRTC gracefully * 9e4d484 net: fec: align IP header in hardware * 6a18208 Input: colibri-vf50-ts: disable IRQs on close * a650cbf tty: serial: fsl_lpuart: Fix Tx DMA edge case * 64086f8 drm/fsl-dcu: enable pixel clock when enabling CRTC * 44108d4 drm/fb_cma_helper: Remove implicit call to disable_unused_functions * 01a613e drm/fsl-dcu: do not transfer register in mode_set_nofb * ab74a917 drm/fsl-dcu: do not explicitly transfer registers on plane init * b385ffb drm/fsl-dcu: enable TCON bypass mode by default * 7ecc29c ARM: dts: vfxxx: Include support for dspi[23] functionality. * 95bb750 drm/fsl-dcu: implement lastclose callback * 5f0a2c4 rpmsg: vf610_rpmsg: check for error pointer * a47f6f42 char: vf610_sema4: use macro to register driver * a5a7e6d char: vf610_sema4: improve error handling * fa359d7 pinctrl: freescale: avoid overwriting pin config when freeing GPIO * 624f65b i2c: imx: defer probe if bus recovery GPIOs are not ready * 2e02dcb i2c: imx: make bus recovery through pinctrl optional * 25ae853 ARM: vf610: PM: initialize suspend to memory seperately * 80c40b6 ARM: dts: vfxxx: Reintroduce the OCRAM nodes * cd89f00 Merge tag 'v4.4.21' into toradex_vf_4.4-next * 45de59e spi: spi-fsl-dspi: Add DMA support for Vybrid * a8f99a5 ARM: dts: vfxxx: Enable DMA for DSPI on Vybrid * 51243ff tty: serial: fsl_lpuart: Fix parity control * 8f2dbc3 Merge branch 'toradex_vf_4.4-rpmsg' into toradex_vf_4.4-next |\ | * 8439c80 ARM: configs: colibri_vf: Enable remoteproc and rpmsg for Vybrid | * 764bf1b ARM: dts: vf610: Enable rpmsg driver for Vybrid | * 5feabad rpmsg: vf610_rpmsg: Add rpmsg driver for Vybrid | * 7b3be87 rpmsg: imx_rpmsg: Add rpmsg examples | * ce28cb8 ARM: dts: vf610: Add device tree node for semaphore module on Vybrid | * a52aca8 char: vf610_sema4: Add support for semaphore module on Vybrid | * 41d0195 ARM: dts: vfxxx: Allow CCM to be accessed using syscon | * f5fcfa3 ARM: dts: vf610: Add device tree node for Vybrid remoteproc driver | * 8b08f5f remoteproc: vf610_cm4_rproc: Add remoteproc support for Vybrid | * 43c2041 remoteproc: Support ELF loading without resource table | * fdbb13c ARM: dts: vfxxx: Add CPU2CPU interrupts for MSCM module | * 91294be irqchip: vf610-mscm-ir: Extend MSCM with CPU2CPU interrupt support |/ * e11f8ba ARM: dts: vf-colibri: use Toradex evalspi * 503ad82 spi: spidev: invent a new hw device to work around spidev warning * 65e1bdf Revert "spi core: Add new sysfs 'num_chipselect' file" * db04bd4 Revert "spi: spidev: Use 'new_id' sysfs file for enabling spidev" Signed-off-by: Max Krummenacher <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> Regards, -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
