Hello, I pushed following updates:
commit 8c2d5034ddd4d402d82688003d3e20e9484e6a91 (HEAD -> master, fslc/rocko, fslc/master-next, fslc/master) Author: Fabio Berton <[email protected]> Date: Mon Nov 20 16:58:38 2017 -0200 linux-boundary: Bump revision to 719fb24c9923 This commit sync defconfig with Boundary source code and apply the following changes: - 719fb24c9923 imx6qdl-cob2.dtsi: initial commit - 3ddcc3bf7b31 sgtl5000: add AVC Attack/Decay, AVC threshold low is -96.00 db - 2403224a895e sgtl5000: fix Bass Filter Feq start bit, add bass HPF - 28193fdd0c38 sgtl5000: and DAP module processing - 0ec88cec6d57 fix mxc_v4l2_capture: add vflip and mirror to sensor_data - 12ac2d3e92b2 ARM: dts: imx6qdl-cid_tab: fix camera orientation - 5cfa3fdba84b ov5640_mipi: allow to override vflip and mirror values - 1b4fa6d2d4e3 ov5640: allow to override vflip and mirror values - ba49388f06a7 mxc_v4l2_capture: add vflip and mirror to sensor_data - f7714e963069 video: mxc: mipi_rm68200: remove start delays - ee4b77691dd1 video: mxc: mipi_dsi: reduce status delays - 646c810af677 ARM: dts: imx6qdl-cid_tab: expose RGB LEDs individually - 1f47a2c2407c ARM: dts: imx6qdl-cid: expose RGB LEDs individually - cfd5205144ae ARM: dts: imx6qdl-cid_tab: bump charging current for HV_MAINS/WC to 2.1A - a9e134ebe037 ARM: dts: imx6qdl-cid: bump charging current for HV_MAINS to 2.1A - 688c9c3f4d77 ARM: dts: imx6qdl-cid_tab: set battery capacity - ae6702137456 ARM: dts: imx6qdl-cid: set battery capacity - 8d5cf1dd8c85 max77823: fuelgauge: allow to override battery capacity - 05dddb49125a max77823: fuelgauge: reset battery values after POR - b5e15ebd57ab max77823: fuelgauge: fix reset function - c7ad0abcc008 max77823: fuelgauge: fix dynamic scale computation - 6d37635eb22b tty: serial: imx: wait until a character is about to be transmitted before enabling the RS485 transmitter - 2f9ee08acbc6 tty: serial: imx: use scatterlist for rx dma - 5c1fab375c77 tty: serial: imx: change tsk_dma_tx to plain work_struct - f1e9beffb7e8 serial: imx-serial - update RX error counters when DMA is used - 4aca91d47fb6 tty: serial: imx: remove dma_rx_work - 00adde7698b2 arch/arm/boot/dts/imx6qdl-ap.dtsi: initial addition - 1c2224ae1e2d boundary_defconfig: make hdmi audio a modules, CONFIG_SND_SOC_IMX_HDMI=m - 444102a656dd imx6qdl-h4.dtsi: KEY_COL0 must be UART4_TX_DATA - be7be3a4e56c sgtl5000: add bass controls - f7cc79eff5f3 imx6qdl-hp.dtsi: always have otg_vbus on, it does not leave this board - 9eba3d40a0fc tty: serial: imx: switch from ageing timer to idle to avoid UART sdma script bug - 4f35eb7cca03 net: fec: remove QUIRK_HAS_RACC from i.mx27 - 52d2469b55eb net: fec: remove QUIRK_HAS_RACC from i.mx25 - 8f3b77ea38bd MLK-14333 firmware: imx: sdma: fix SSI dual fifo swap - 74f04ec66272 ARM: imx6q: support ptp and rmii clock from pad - da999c39acec ARM: dts: imx6qdl-cid_tab: swap goodix touch axes - 9d2a20394fa3 Input: goodix - remove single touch reports - 90eff99d70b8 Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen" - 4771b34caae1 Input: goodix - add axis swapping and axis inversion support - d8d55b7d8752 ARM: dts: imx6qdl-cid: force USB H1 device id - d8f1e3f53cff usb: chipidea: allow to override id from device tree - 6067115920fd net: fec: Call swap_buffer() prior to IP header alignment - b924590deced net: fec: align IP header in hardware - 4030d318f8d6 boundary_defconfig: add CONFIG_BRIDGE, needed for bluetooth PAN - a5bdde5ddd05 sec_battery: make AC online depend on both battery health and charger health - b16b65a5b97f goodix: adding gt928 to i2c_device_id table lets modprobe be automatic - 1f39203ce15b Revert "max77823_charger: favor chgin over wcin" - 1c1f08bd0e1f imx6qdl-cid_tab: use pwm3 instead of pwm1 to control lvds backlight - 8ffe053250f4 max77823_charger: favor chgin over wcin - e0f21b50a959 pwm_bl: allow an array of enable pins - 13fb24caf547 nitrogen6_vm_pt_defconfig: initial addition - 3ac8e32d322b nitrogen51_vm_defconfig: use Andrew's settings, the only user of this defconfig - 237892e1726d input: touchscreen: ft5x06: select REGMAP_I2C in Kconfig - c24bab70914f imx6sx-ys.dts: pullup RESET_DSP_N - f4a6076e1143 ARM: dts: imx6q-cid_tab: initial addition - ea4201a38c70 imx6qdl-nitrogen6x.dtsi: s/ov5640_int/ovti,ov5640/ - 46d3bbf75727 ov5640: add ov5640_int to ov5640_id table - 4b5f16e4857d ov5642: improve error message - 7c5c37544ae7 max77823_charger: update otg_vbus_enabled in the regulator notifier callback - 83059e5e06dc ov5640_mipi: remove ov5640_reg file on rmmod - aedfdbb024a2 max77823_charger: don't call max77823_set_online directly, have battery do it - adfb14277c18 sec_battery: avoid 'Undefine Battery Status' when not charging - c647c9e98f5b tools include: Add a __fallthrough statement - ef46e9519ce8 max77823_fuelgauge: fix current_now/current_avg when negative - ce1bc18798ae sec_battery: call chargers POWER_SUPPLY_PROP_STATUS, when battery's status changes - 8d5aabcc73a5 imx6qdl-ash2.dtsi: initial addition - 1d5286fd2181 imx6qdl-ash.dtsi: map ttymxc3 to UART3 to match ash2 - e03025b9cc77 imx6q-neol-tst.dts: use EIM_DA7 for GP_5V_DLP_EN - dee9694b8283 imx6qdl-neol.dtsi: use EIM_DA7 for GP_5V_DLP_EN - f67ef4b07eb2 imx6qdl-ash.dtsi: gpio_3 is poweroff only - 18b43433c84b max77823_charger: maker as undervoltage if we supply otg vbus power - 8869166a01d7 imx6qdl-cid.dtsi: no need to poll for charger health - 341bae211c71 max77823_charger: sep Signed-off-by: Fabio Berton <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> commit 94611c67c3b2baac03b4bcf9894a62279f97cea3 Author: Fabio Berton <[email protected]> Date: Mon Nov 20 16:58:35 2017 -0200 u-boot-boundary: Create u-boot-boundary-common include file - Use a common file to make easier update, maintain and create others U-Boot recipes like U-Boot fw-utils. - Rename recipes to use U-Boot version as recipe PN. - Fix U-Boot spelling on description. Signed-off-by: Fabio Berton <[email protected]> Signed-off-by: Otavio Salvador <[email protected]> Regards, -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
