Hi Takashi, On Wed, Nov 29, 2017 at 6:43 AM, Takashi Matsuzawa <[email protected]> wrote: > Hello, I learned a bit. > > So, for this BCM4339 (correct?) to work for Bluetooth also, WiFi need to be > properly working anyway. > > ________________________________ > From: Takashi Matsuzawa > Sent: Wednesday, November 29, 2017 11:43 AM > To: [email protected] > Subject: Re: pico-imx7d bluetooth support? > > > OK, I cannot see uart7 (Bluetooth) in mainline source, which is present in > TN source tree. > I imagine, at least u-boot update is necessary to enable Bluetooth on this > board with mainline kernel. > > ________________________________ > From: Takashi Matsuzawa > Sent: Wednesday, November 29, 2017 1:36 AM > To: [email protected] > Subject: pico-imx7d bluetooth support? > > > Hello. > > I can see WiFi support for this board (by brcmfmac driver and firmware) is > currently being looked at. > Then, what is the status of bluetooth support? > > Looking into the chip spec, though both of WiFi and Bluetooth are supported > by single chip, Bluetooth is accessed through UART whereas WIFI is through > SDIO. > So, I this means separate driver is needed to enable Bluetooth. > > Is it already there (and I just need to enable e.g. kernel configuration > option), or some additinoal work is needed. > > My concern is that I cannot use BT-USB dongle for this board since I want to > use its only USB port (USB-C) for other purposes, so I rather need to use > internal Bluetooth chip. > > > > -- > _______________________________________________ > meta-freescale mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-freescale >
No bluetooth support for imx7d-pico-pi on this project yet. I am still working on Wifi and I will try to add BT when Wifi is functional. Thanks! Regards, Vanessa -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
