Hi all, I need to update mfgtool bsp for a custom board. Until now I used the bsp mfgtool builded using the dora branch but now a new emmc chip is no more compatible with kernel 3.10 mmc driver.
I'm using now the warrior branch and I'm tring to bitbake the recipe fsl-image-mfgtool-initramfs for MACHINE imx6qdlsabresd without any modifications. Bitbake give me this error: You cannot use UBOOT_MACHINE and UBOOT_CONFIG at the same time If inside the imx6qdlsabresd.conf I remove the following row the build is executed: UBOOT_MACHINE ?= "mx6sabresd_defconfig" With the builded files I've prepared the MfgToolv2 package but when I launch it the mfgtool kernel was not completely executed because stay stuck with following message (ever 30s): No udc Available! My question are: -) The machine config fix is right? I think not because in deploy folder I don't found the u-boot-mfgtool for example. -) This new yocto branch mfgtool generate files are compatible with MfgToolv2? Thanks for support ============================ *Francesco Palmisano*
-- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
