Here is the current error I am seeing: randalls@randalls:/data/YOCTO/poky-dylan-9.0.2/build$ vim conf/bblayers.conf randalls@randalls:/data/YOCTO/poky-dylan-9.0.2/build$ bitbake core-image-sato Pseudo is not present but is required, building this first before the main build Loading cache: 100% |##########################################################################################| ETA: 00:00:00 Loaded 1212 entries from dependency cache. ERROR: No recipes available for: /data/YOCTO/poky-dylan-9.0.2/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.2.bbappend /data/YOCTO/poky-dylan-9.0.2/meta-intel/meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend /data/YOCTO/poky-dylan-9.0.2/meta-yocto/recipes-core/busybox/busybox_1.20.2.bbappend /data/YOCTO/poky-dylan-9.0.2/meta-intel/meta-cedartrail/recipes-kernel/linux/linux-yocto-rt_3.0.bbappend ERROR: Command execution failed: Exited with 1
Summary: There were 2 ERROR messages shown, returning a non-zero exit code. ________________________________ From: [email protected] [[email protected]] on behalf of Svancara, Randall [[email protected]] Sent: Sunday, October 13, 2013 10:48 AM To: [email protected] Subject: [meta-intel] Yocto Intel Atom N2600/N2800/D2550 Cedartrail I am trying to use Yocto to build a version of embedded Linux that can work on an Intel Atom D2550. I am following your instructions located here: https://www.yoctoproject.org/download/intel%C2%AE-atom%E2%84%A2-n2600n2800d2550-wnm10-chipset-cedar-trail-open-source-graphics I am a little vague on some of the details of the instructions and would appreciate any clarification that may able to provide. 1. I download the Danny version of the Yocto project here: http://mirrors.kernel.org/yocto/yocto/yocto-1.3/poky-danny-8.0.1.tar.bz2 2. Extract the tarball into a directory called /data/YOCTO. 3. Here is where I am confused. I use git to clone the following: git clone git://git.openembedded.org/bitbake git clone git://git.openembedded.org/openembedded-core git clone git://git.yoctoproject.org/meta-intel\ wget http://downloads.yoctoproject.org/releases/yocto/yocto-1.3.1/machines/cedartrail/meta-cedartrail-danny-8.0.1.tar.bz2 4. I know have the following directories in /data /data/bitbake /data/openembedded-core /data/meta-intel /data/YOCTO /data/meta-cedartrail-danny-8.0.1.tar.bz2 5. I extract the meta-cedartrail-danny-8.0.1.tar.bz2 file. I place the meta-cedartrail/meta-cedartrail sub directory into the /data/meta-intel directory. At this point, I am lost as to where I need to place the bitbake and openembedded directories. I have tried so many variations of copying directories around and nothing seems to work. I always end up with errors in the build. I am using Ubuntu 12.04. I appreciate any assistance you may be able to provide. Thanks,
_______________________________________________ meta-intel mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-intel
