Nas, Is the application able to run properly on the build system? If not then you have some other problem. Nitin
From: [email protected] [mailto:[email protected]] On Behalf Of nesredin mahmud Sent: Friday, October 25, 2013 12:03 PM To: [email protected] Subject: [meta-intel] how to cross compile for Ivy bridge processor Hello everyone, I have a machine installed with meta-chiefriever. The following is a piece of information from meta-chiefriver README file. The 'Chief River' platform consists of the Intel Ivy Bridge processor, plus the Panther Point PCH. This BSP assumes that the Ivy Bridge integrated graphics are being used. Further information on the platforms supported by this BSP can be found here: http://www.intel.com/p/en_US/embedded/hwsw/hardware/core-hm76/overview Information on all Intel(r) embedded platforms can be found here: http://www.intel.com/p/en_US/embedded/hwsw/hardware Now I want to execute a new application (iperf tool) on the meta-chiefriver machine---target machine.Therefore, I compiled iperf in my host machine (same nature with my target machine) and exported it the target machine. Finally I tried to execute it, It produced the following error: iperf: line 1: syntax error: unexpected "(" I investigated a lot about the error message in the internet, many feedback about this suggested i had to cross-compile it with the target machine. First of all I have the same hardware machine; secondly I dont know what I should pass to the compiler for meta-chiefriver type. info: host machine: 64-bit OS: ubuntu-12.04-x86_64 This took me a lot of days, I really appreciate your help. Thank you, //nas
_______________________________________________ meta-intel mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-intel
