Hi,
I'm building yocto distro for my custom hardware based on intel Atom E3845. Below is my yocto build configuration: BB_VERSION = "1.24.0" BUILD_SYS = "i686-linux" NATIVELSBSTRING = "Ubuntu-12.04" TARGET_SYS = "i586-poky-linux" MACHINE = "valleyisland-32" DISTRO = "poky" DISTRO_VERSION = "1.7.1" TUNE_FEATURES = "m32 core2" TARGET_FPU = "" meta meta-yocto meta-yocto-bsp = "(nobranch):ff482c2522f7092216a4ac7b335393a5294d97d5" meta-msc-ldk-core = "v0.4.0:ed047edacf285e711c55ed8389111981abc417c7" meta-valleyisland = "(nobranch):5af06a8b0dd28498e77581f6bcb7fd6f722b755a" meta = "(nobranch):56c6bebdd19b5b64a2585986299543abf6e6ad48" I have changed kernel configuration and successfully built it (arch/x86/boot/bzImage), but when I copy the newly built kernel to my target hardware I do not see the relevant changes. I check my kernel config (zcat /proc/config.gz) and my updated configuration is not there. After updating the configuration, I can see the relevant files being built (that confirms my changes were applied) also I can see my updated configuration is (kernel_source_code/include/config.gz). So why can't I see the new configuration on the target hardware? I also tried building the kernel outside the yocto build system (used the SDK to build the kernel). Same observations. I have worked for many years on embedded ARM linux systems but I have never come across such a puzzling observation. Any one get any ideas what I may have missed or what I may be doing wrong ? Thanks in advance! Regards, Pj
-- _______________________________________________ meta-intel mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-intel
