What board are you booting specifically? Looking at the UART (serial) output can help to diagnose booting problems.
--S On 3/22/18 7:51 PM, Mohammad, Jamal M wrote: > Thanks both of you.. I am now trying the intel website link.. I tried the > default master branch of meta-intel with master branch of poky.. > Core-image-minimal target was working fine.. But when I booted using > core-image-sato target, Yocto Splash screen was displayed and the screen went > blank.. What does this mean... > > -----Original Message----- > From: Tan, Jui Nee [mailto:[email protected]] > Sent: Friday, March 23, 2018 8:17 AM > To: Stephano Cetola <[email protected]>; Mohammad, Jamal M > <[email protected]> > Cc: [email protected] > Subject: RE: [meta-intel] Apollo Lake Yocto BSP > > Hi, > > > > Alternatively, you can refer to this link: > https://urldefense.proofpoint.com/v2/url?u=https-3A__www.yoctoproject.org_bsps_jethro203-2Dleaf-2Dhill_&d=DwIGaQ&c=gJN2jf8AyP5Q6Np0yWY19w&r=4h__2a8-7N65qoDnmtsyGh_QYq3kPCn-Loy2L0LHnCs&m=MdWAB4reZSNS7PHk74O08IadCyL8SMfJ6BHORLUNf-A&s=ETjROtUwhwzvGw3-iARW7k4XX01FFTdRd_v9ixkaGJY&e= > to get Apollo Lake-i Yocto Project BSP and build the image. > > > > Thanks, > > Juinee > > > >> -----Original Message----- > >> From: [email protected] [mailto:meta-intel- > >> [email protected]] On Behalf Of Stephano Cetola > >> Sent: Friday, March 23, 2018 1:48 AM > >> To: Mohammad, Jamal M <[email protected]> > >> Cc: [email protected] > >> Subject: Re: [meta-intel] Apollo Lake Yocto BSP > >> > >> On 3/21/18 9:58 PM, Mohammad, Jamal M wrote: > >>> Does it mean, I cannot use the default meta-intel layer and have to > >> follow the Intel document. > >>> > >>> -----Original Message----- > >>> From: Anuj Mittal [mailto:[email protected]] > >>> Sent: Wednesday, March 21, 2018 9:12 AM > >>> To: Mohammad, Jamal M <[email protected]>; meta- > >> [email protected] > >>> Subject: Re: [meta-intel] Apollo Lake Yocto BSP > >>> > >>> On 03/19/2018 07:03 PM, Mohammad, Jamal M wrote: > >>>> Hi Guys, > >>>> > >>>> We have Apollo Lake based board. And want to install Yocto Image. Does > >>>> the meta-intel master branch has BSP Support for Apollo Lake. > >>>> > >>>> git clone git://git.yoctoproject.org/meta-intel > >>>> > >>>> If not where can I find the BSP Support Layer for Apollo Lake. If yes > >>>> what branch of poky should I use. > >>>> > >>> > >>> You can refer to the BSP documentation here: > >>> > >>> https://urldefense.proofpoint.com/v2/url?u=https- > >> 3A__www.intel.com_content_www_us_en_embedded_products_apollo- > >> 2Dlake_technical-2Dlibrary.html&d=DwID- > >> g&c=gJN2jf8AyP5Q6Np0yWY19w&r=4h__2a8-7N65qoDnmtsyGh_QYq3kPCn- > >> Loy2L0LHnCs&m=4i-KLG-O9Nw8nR9XSeNEt- > >> mY_ykTyzcI8FObTaCjC1k&s=oYpdE6x9YRj3mGzMPnMQ0e1soX035puKW8MxA_6W4nc&e= > >>> > >>> Thanks, > >>> > >>> Anuj > >>> > >> > >> You are welcome to build your own BSP using the meta-intel layer, as it > >> has support for Apollo Lake SoC's. The BSP is intended to make support > >> easier when working with your corporate representative. > >> > >> The published BSPs are also a good reference guide for building your own > >> BSP as they will enable many features that may not be enabled by default > >> in meta-intel. > >> > >> Cheers, > >> Stephano > >> -- > >> _______________________________________________ > >> meta-intel mailing list > >> [email protected] > >> https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.yoctoproject.org_listinfo_meta-2Dintel&d=DwIGaQ&c=gJN2jf8AyP5Q6Np0yWY19w&r=4h__2a8-7N65qoDnmtsyGh_QYq3kPCn-Loy2L0LHnCs&m=MdWAB4reZSNS7PHk74O08IadCyL8SMfJ6BHORLUNf-A&s=kqZqbjJUqSN2bU9SJh38GQ3Zn9eeL6uCkpTj_qnzpZE&e= > -- _______________________________________________ meta-intel mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-intel
