For swupdate support, please see their google group: https://groups.google.com/forum/#!topic/swupdate/MGq0uMQAUvs
It sounds like you need to understand swupdate better so that you can utilize their GRUB or EFI Boot Guard support. Cheers, Stephano On 4/2/18 2:56 AM, Mohammad, Jamal M wrote: > Hi, > > I cloned the master branch of poky, meta-intel and meta-swupdate and > then I added both layers to bblayers.conf file > > When I run “bitbake swupdate-image”, I get the following error: > > > ERROR: Nothing PROVIDES 'u-boot-fw-utils' (but > /home/jamal/Yocto/poky/meta-swupdate/recipes-support/swupdate/swupdate_2018.03.bb > DEPENDS on or otherwise requires it) > > u-boot-fw-utils was skipped: Either UBOOT_MACHINE or UBOOT_CONFIG must > be set in the intel-corei7-64 machine configuration. > > NOTE: Runtime target 'swupdate-www' is unbuildable, removing... > > Missing or unbuildable dependency chain was: ['swupdate-www', > 'u-boot-fw-utils'] > > ERROR: Required build target 'swupdate-image' has no buildable providers. > > Missing or unbuildable dependency chain was: ['swupdate-image', > 'swupdate-www', 'u-boot-fw-utils'] > > As, it is Intel board, the bootloader should not be uboot, so why it is > throwing that error. I am just a beginner in Yocto.. Forgive me if I > made a small mistake. Did anyone have steps of how to get started for > swupdate on Intel Yocto. > > Thanks and Regards, > Mohammad Jamal, > NCR Corporation -- _______________________________________________ meta-intel mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-intel
