You should be able to see the gpiochips available in /sys/class/gpio/gpiochip* and "byt_gpio_init" is also being called with the following kernel configurations enabled:
CONFIG_PINCTRL=y CONFIG_PINCTRL_BAYTRAIL=y CONFIG_PINCTRL_INTEL=y Thanks, Juinee From: [email protected] [mailto:[email protected]] On Behalf Of Henrik Haugaard Jensen Sent: Wednesday, October 10, 2018 10:28 PM To: [email protected] Subject: [meta-intel] GPIO functionality for Intel E3845 CPU (valley-island, bay-trail) We have successfully used meta-intel jethro branch for our device based on an intel E3845 CPU. Now we need to upgrade to a newer Linux kernel to get full camera/video/media support. But when building new BSP with sumo or rocko branches it turn out that pinctrl/GPIO system is not working neither with linux-intel 4.9 or 4.14. Baytrail pin-controller support and GPIO support seems to be configured for the kernel out of the box, but after booting "/sys/kernel/debug/gpio" is empty and the pin-controller gpio-chip's is not showing in "/sys/class/gpio". Doing initcall debugging shows that "bxt_pinctrl_init" (Broxton ) is called and not "byt_gpio_init" (Baytrail) - I have tried, but not been able, to find out why. I have tried both vanilla meta-intel sumo BSP and "ROCKO 2.4 - BAY TRAIL BSP" (meta-intel branch 8.1-rocko-2.4.2) - what is going wrong? Also I have the impression that since linux 4.8 the "/sys/class/gpio" user interface is obsolete and apparently replaced by /dev/gpioxxx pin devices and a new gpiolib userspace tool for this has been provided. Has this new GPIO interface made its way into meta-intel? Regards, Henrik Haugaard Jensen TrackMan
-- _______________________________________________ meta-intel mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-intel
