On 9/26/2022 15:17, Andrew Davis wrote:
On 9/26/22 12:40 PM, Ryan Eatmon via lists.yoctoproject.org wrote:
Adding support for j784s4-evm:
- Add configurations.
- Add firmware.
- Add u-boot.
- Add gpu support.
Signed-off-by: Ryan Eatmon <[email protected]>
Signed-off-by: Hari Nagalla <[email protected]>
Signed-off-by: Randolph Sapp <[email protected]>
---
conf/machine/j784s4-evm-k3r5.conf | 11 +++
conf/machine/j784s4-evm.conf | 27 +++++++
recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb | 2 +-
.../ti-img-rogue-driver_1.15.6133109.bb | 6 +-
recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb | 1 +
.../ti-img-rogue-umlibs_1.15.6133109.bb | 5 +-
recipes-kernel/linux/kernel-rdepends.inc | 2 +
recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb | 75 +++++++++++++++++++
8 files changed, 124 insertions(+), 5 deletions(-)
create mode 100644 conf/machine/j784s4-evm-k3r5.conf
create mode 100644 conf/machine/j784s4-evm.conf
diff --git a/conf/machine/j784s4-evm-k3r5.conf
b/conf/machine/j784s4-evm-k3r5.conf
new file mode 100644
index 00000000..04feebc6
--- /dev/null
+++ b/conf/machine/j784s4-evm-k3r5.conf
@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: J784S4 EVM (R5F)
+#@DESCRIPTION: Machine configuration for the TI J784S4 EVM (R5F core)
+
+require conf/machine/include/k3r5.inc
+
+SYSFW_SOC = "j784s4"
+SYSFW_CONFIG = "evm"
+SYSFW_SUFFIX = "gp"
+
+UBOOT_MACHINE = "j784s4_evm_r5_defconfig"
diff --git a/conf/machine/j784s4-evm.conf b/conf/machine/j784s4-evm.conf
new file mode 100644
index 00000000..957e5766
--- /dev/null
+++ b/conf/machine/j784s4-evm.conf
@@ -0,0 +1,27 @@
+#@TYPE: Machine
+#@NAME: J784S4 EVM
+#@DESCRIPTION: Machine configuration for the TI J784S4 EVM
+
+require conf/machine/include/j7.inc
+
+MACHINE_FEATURES += "gpu"
+
+SERIAL_CONSOLES = "115200;ttyS10"
+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
+TFA_K3_USART = "0x8"
+OPTEE_K3_USART = "0x8"
+
+KERNEL_DEVICETREE = " \
+ ti/k3-j784s4-evm.dtb \
+"
+
+UBOOT_MACHINE = "j784s4_evm_a72_defconfig"
+
+# J721S2 supports multi-certificate images, use the same
+IMAGE_BOOT_FILES = "${IMAGE_BOOT_FILES_MULTI_CERT}"
+
+do_image_wic[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
+do_image_tar[mcdepends] = "mc::k3r5:ti-sci-fw:do_deploy"
+
+TFA_BOARD = "j784s4"
+
diff --git a/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
b/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
index 83619090..cca5704e 100644
--- a/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
+++ b/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb
@@ -13,7 +13,7 @@ PR = "${INC_PR}.1"
CLEANBROKEN = "1"
-COMPATIBLE_MACHINE = "j721s2-evm|j721s2-hs-evm"
+COMPATIBLE_MACHINE = "j721s2-evm|j721s2-hs-evm|j784s4-evm"
PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git
a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
index 3dbc87b6..1127c5d1 100644
--- a/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
+++ b/recipes-bsp/powervr-drivers/ti-img-rogue-driver_1.15.6133109.bb
@@ -11,7 +11,7 @@ MACHINE_KERNEL_PR_append = "b"
PR = "${MACHINE_KERNEL_PR}"
PACKAGE_ARCH = "${MACHINE_ARCH}"
-COMPATIBLE_MACHINE = "j7-evm|j7-hs-evm|j721s2-evm|j721s2-hs-evm|am62xx"
+COMPATIBLE_MACHINE =
"j7-evm|j7-hs-evm|j721s2-evm|j721s2-hs-evm|j784s4-evm|am62xx"
j784s4-evm.conf should include a j784s4.inc family file, then here
you'll only need |j784s4|. Makes it easier when adding machines
based on the j784s4 SoC.
DEPENDS = "virtual/kernel"
@@ -26,17 +26,19 @@ SRC_URI = " \
S = "${WORKDIR}/git"
...
--- a/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
+++ b/recipes-ti/ti-rtos-bin/ti-rtos-firmware.bb
@@ -19,6 +19,7 @@ PLAT_SFX_j7200-evm = "j7200"
PLAT_SFX_j7200-hs-evm = "j7200"
PLAT_SFX_j721s2-evm = "j721s2"
PLAT_SFX_j721s2-hs-evm = "j721s2"
+PLAT_SFX_j784s4-evm = "j784s4"
PLAT_SFX_am65xx = "am65xx"
PLAT_SFX_am64xx = "am64xx"
PLAT_SFX_am62xx = "am62xx"
@@ -247,6 +248,26 @@ do_install_j721s2-hs-evm() {
# install -m 0644
${RTOS_ETH_FW_DIR}/app_remoteswitchcfg_server_strip.xer5f
${LEGACY_ETH_FW_DIR}
}
+do_install_j784s4-evm() {
+ install -d ${LEGACY_IPC_FW_DIR}
+ install -m 0644
${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu1_1_release_strip.xer5f
${LEGACY_IPC_FW_DIR}
+ install -m 0644
${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu2_0_release_strip.xer5f
${LEGACY_IPC_FW_DIR}
+ install -m 0644
${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu2_1_release_strip.xer5f
${LEGACY_IPC_FW_DIR}
+ install -m 0644
${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu3_0_release_strip.xer5f
${LEGACY_IPC_FW_DIR}
+ install -m 0644
${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu3_1_release_strip.xer5f
${LEGACY_IPC_FW_DIR}
+ install -m 0644
${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu4_0_release_strip.xer5f
${LEGACY_IPC_FW_DIR}
+ install -m 0644
${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu4_1_release_strip.xer5f
${LEGACY_IPC_FW_DIR}
+ install -m 0644
${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_1_release_strip.xe71
${LEGACY_IPC_FW_DIR}
+ install -m 0644
${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_2_release_strip.xe71
${LEGACY_IPC_FW_DIR}
+ install -m 0644
${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_3_release_strip.xe71
${LEGACY_IPC_FW_DIR}
+ install -m 0644
${RTOS_IPC_FW_DIR}/ipc_echo_test_c7x_4_release_strip.xe71
${LEGACY_IPC_FW_DIR}
+ # DM Firmware
+ install -m 0644
${RTOS_DM_FW_DIR}/ipc_echo_testb_mcu1_0_release_strip.xer5f
${LEGACY_DM_FW_DIR}
+ # ETH firmware
+ install -d ${LEGACY_ETH_FW_DIR}
+ install -m 0644
${RTOS_ETH_FW_DIR}/app_remoteswitchcfg_server_strip.xer5f
${LEGACY_ETH_FW_DIR}
+}
+
I wonder if there is a way to better add these than just long lists,
this file's size is getting out of hand :/
Andrew
Compeltely agree. I like all of the clean up done so far. We just need
to figure out a better solution for the firmware as well.
do_install_am65xx() {
install -d ${LEGACY_IPC_FW_DIR}
install -m 0644
${RTOS_IPC_FW_DIR}/ipc_echo_test_mcu1_0_release_strip.xer5f
${LEGACY_IPC_FW_DIR}
@@ -372,6 +393,21 @@ ALTERNATIVE_${PN}_j721s2-hs-evm = "\
j721s2-c71_1-fw-sec \
"
+ALTERNATIVE_${PN}_j784s4-evm = "\
+ j784s4-mcu-r5f0_0-fw \
+ j784s4-mcu-r5f0_1-fw \
+ j784s4-main-r5f0_0-fw \
+ j784s4-main-r5f0_1-fw \
+ j784s4-main-r5f1_0-fw \
+ j784s4-main-r5f1_1-fw \
+ j784s4-main-r5f2_0-fw \
+ j784s4-main-r5f2_1-fw \
+ j784s4-c71_0-fw \
+ j784s4-c71_1-fw \
+ j784s4-c71_2-fw \
+ j784s4-c71_3-fw \
+ "
+
# Set up link names for the firmwares
TARGET_MCU_R5FSS0_0_am65xx = "am65x-mcu-r5f0_0-fw"
@@ -442,6 +478,19 @@ TARGET_MAIN_R5FSS1_1_SIGNED_j721s2-hs-evm =
"j721s2-main-r5f1_1-fw-sec"
TARGET_C7X_0_SIGNED_j721s2-hs-evm = "j721s2-c71_0-fw-sec"
TARGET_C7X_1_SIGNED_j721s2-hs-evm = "j721s2-c71_1-fw-sec"
+TARGET_MCU_R5FSS0_0_j784s4-evm = "j784s4-mcu-r5f0_0-fw"
+TARGET_MCU_R5FSS0_1_j784s4-evm = "j784s4-mcu-r5f0_1-fw"
+TARGET_MAIN_R5FSS0_0_j784s4-evm = "j784s4-main-r5f0_0-fw"
+TARGET_MAIN_R5FSS0_1_j784s4-evm = "j784s4-main-r5f0_1-fw"
+TARGET_MAIN_R5FSS1_0_j784s4-evm = "j784s4-main-r5f1_0-fw"
+TARGET_MAIN_R5FSS1_1_j784s4-evm = "j784s4-main-r5f1_1-fw"
+TARGET_MAIN_R5FSS2_0_j784s4-evm = "j784s4-main-r5f2_0-fw"
+TARGET_MAIN_R5FSS2_1_j784s4-evm = "j784s4-main-r5f2_1-fw"
+TARGET_C7X_0_j784s4-evm = "j784s4-c71_0-fw"
+TARGET_C7X_1_j784s4-evm = "j784s4-c71_1-fw"
+TARGET_C7X_2_j784s4-evm = "j784s4-c71_2-fw"
+TARGET_C7X_3_j784s4-evm = "j784s4-c71_3-fw"
+
ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_0-fw] =
"${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
ALTERNATIVE_LINK_NAME[am65x-mcu-r5f0_1-fw] =
"${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"
@@ -496,6 +545,19 @@ ALTERNATIVE_LINK_NAME[j721s2-main-r5f1_1-fw-sec]
= "${base_libdir}/firmware/${TA
ALTERNATIVE_LINK_NAME[j721s2-c71_0-fw-sec] =
"${base_libdir}/firmware/${TARGET_C7X_0_SIGNED}"
ALTERNATIVE_LINK_NAME[j721s2-c71_1-fw-sec] =
"${base_libdir}/firmware/${TARGET_C7X_1_SIGNED}"
+ALTERNATIVE_LINK_NAME[j784s4-mcu-r5f0_0-fw] =
"${base_libdir}/firmware/${TARGET_MCU_R5FSS0_0}"
+ALTERNATIVE_LINK_NAME[j784s4-mcu-r5f0_1-fw] =
"${base_libdir}/firmware/${TARGET_MCU_R5FSS0_1}"
+ALTERNATIVE_LINK_NAME[j784s4-main-r5f0_0-fw] =
"${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_0}"
+ALTERNATIVE_LINK_NAME[j784s4-main-r5f0_1-fw] =
"${base_libdir}/firmware/${TARGET_MAIN_R5FSS0_1}"
+ALTERNATIVE_LINK_NAME[j784s4-main-r5f1_0-fw] =
"${base_libdir}/firmware/${TARGET_MAIN_R5FSS1_0}"
+ALTERNATIVE_LINK_NAME[j784s4-main-r5f1_1-fw] =
"${base_libdir}/firmware/${TARGET_MAIN_R5FSS1_1}"
+ALTERNATIVE_LINK_NAME[j784s4-main-r5f2_0-fw] =
"${base_libdir}/firmware/${TARGET_MAIN_R5FSS2_0}"
+ALTERNATIVE_LINK_NAME[j784s4-main-r5f2_1-fw] =
"${base_libdir}/firmware/${TARGET_MAIN_R5FSS2_1}"
+ALTERNATIVE_LINK_NAME[j784s4-c71_0-fw] =
"${base_libdir}/firmware/${TARGET_C7X_0}"
+ALTERNATIVE_LINK_NAME[j784s4-c71_1-fw] =
"${base_libdir}/firmware/${TARGET_C7X_1}"
+ALTERNATIVE_LINK_NAME[j784s4-c71_2-fw] =
"${base_libdir}/firmware/${TARGET_C7X_2}"
+ALTERNATIVE_LINK_NAME[j784s4-c71_3-fw] =
"${base_libdir}/firmware/${TARGET_C7X_3}"
+
# Create the firmware alternatives
ALTERNATIVE_TARGET[am65x-mcu-r5f0_0-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_0_release_strip.xer5f"
@@ -552,6 +614,19 @@ ALTERNATIVE_TARGET[j721s2-main-r5f1_1-fw-sec] =
"${base_libdir}/firmware/pdk-ipc
ALTERNATIVE_TARGET[j721s2-c71_0-fw-sec] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_1_release_strip.xe71.signed"
ALTERNATIVE_TARGET[j721s2-c71_1-fw-sec] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_2_release_strip.xe71.signed"
+ALTERNATIVE_TARGET[j784s4-mcu-r5f0_0-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_testb_mcu1_0_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-mcu-r5f0_1-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu1_1_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-main-r5f0_0-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-main-r5f0_1-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu2_1_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-main-r5f1_0-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu3_0_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-main-r5f1_1-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu3_1_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-main-r5f2_0-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu4_0_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-main-r5f2_1-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_mcu4_1_release_strip.xer5f"
+ALTERNATIVE_TARGET[j784s4-c71_0-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_1_release_strip.xe71"
+ALTERNATIVE_TARGET[j784s4-c71_1-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_2_release_strip.xe71"
+ALTERNATIVE_TARGET[j784s4-c71_2-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_3_release_strip.xe71"
+ALTERNATIVE_TARGET[j784s4-c71_3-fw] =
"${base_libdir}/firmware/pdk-ipc/ipc_echo_test_c7x_4_release_strip.xe71"
+
ALTERNATIVE_PRIORITY = "10"
# make sure that lib/firmware, and all its contents are part of the
package
--
Ryan Eatmon [email protected]
-----------------------------------------
Texas Instruments, Inc. - LCPD - MGTS
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#15097):
https://lists.yoctoproject.org/g/meta-ti/message/15097
Mute This Topic: https://lists.yoctoproject.org/mt/93932414/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
