From: Ryan Eatmon <[email protected]> Serial console in J721S2/J784S4 EVM config was set to ttyS10. It should be ttyS2. This caused sysv based systems (eg, tiny) to apparently hang because of no login prompt. This didn't show up as a problem on systemd systems (eg, default) because systemd will automatically setup a serial tty with the console option passed in on the kernel command line (using console=...), which U-Boot correctly passes in as ttyS2 for J721S2/J784S4.
Signed-off-by: Jonathan Humphreys <[email protected]> Signed-off-by: Ryan Eatmon <[email protected]> Signed-off-by: Denys Dmytriyenko <[email protected]> --- meta-ti-bsp/conf/machine/j721s2-evm.conf | 2 +- meta-ti-bsp/conf/machine/j784s4-evm.conf | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/meta-ti-bsp/conf/machine/j721s2-evm.conf b/meta-ti-bsp/conf/machine/j721s2-evm.conf index 77fc3e66..46d5dbf6 100644 --- a/meta-ti-bsp/conf/machine/j721s2-evm.conf +++ b/meta-ti-bsp/conf/machine/j721s2-evm.conf @@ -4,7 +4,7 @@ require conf/machine/include/j721s2.inc -SERIAL_CONSOLES = "115200;ttyS10" +SERIAL_CONSOLES = "115200;ttyS2" SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" TFA_K3_USART = "0x8" OPTEE_K3_USART = "0x8" diff --git a/meta-ti-bsp/conf/machine/j784s4-evm.conf b/meta-ti-bsp/conf/machine/j784s4-evm.conf index a8ad25f6..278b393c 100644 --- a/meta-ti-bsp/conf/machine/j784s4-evm.conf +++ b/meta-ti-bsp/conf/machine/j784s4-evm.conf @@ -6,7 +6,7 @@ require conf/machine/include/j7.inc MACHINE_FEATURES += "gpu" -SERIAL_CONSOLES = "115200;ttyS10" +SERIAL_CONSOLES = "115200;ttyS2" SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" TFA_K3_USART = "0x8" OPTEE_K3_USART = "0x8" -- 2.25.1
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#15323): https://lists.yoctoproject.org/g/meta-ti/message/15323 Mute This Topic: https://lists.yoctoproject.org/mt/94817275/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
