On Fri, Feb 17, 2023 at 10:09:36PM -0600, Ryan Eatmon wrote:
>
>
> On 2/17/2023 1:09, Denys Dmytriyenko wrote:
> >On Wed, Feb 15, 2023 at 01:33:40PM -0600, Andrew Davis via
> >lists.yoctoproject.org wrote:
> >>Hello all,
> >>
> >>This is a combined series that replaces my previous ones on
> >>ti-rtos-firmware and SECDEV. There is now a small dependency
> >>between them so I have merged them here.
> >>
> >>Big change is in the SECDEV series which now uses a new bbclass
> >>to combine the SECDEV env setup in one spot. We also remove
> >>the ti-path.inc usage.
> >
> >Andrew,
> >
> >Overall, looks very good and I like the bbclass approach! However, I tried to
> >test the series locally (started with j721e-evm) and got these:
> >
> >
> >WARNING: ti-rtos-firmware-08.02.00.04-r3.0 do_package: ti-rtos-firmware: NOT
> >adding alternative provide /lib/firmware/j7-mcu-r5f0_1-fw:
> >/lib/firmware/pdk-ipc/ipc_echo_test_mcu1_1_release_strip.xer5f does not exist
> >
> >
> >ERROR: mc:k3r5:ti-sci-fw-2022.01-r3.2 do_compile: oe_runmake failed
> >ERROR: mc:k3r5:ti-sci-fw-2022.01-r3.2 do_compile:
> >ExecutionError('/OE/arago-kirkstone/build/arago-tmp-default-glibc/work/j721e_evm_k3r5-oe-linux-gnueabi/ti-sci-fw/2022.01-r3.2/temp/run.do_compile.165613',
> > 1, None, None)
> >ERROR: Logfile of failure stored in:
> >/OE/arago-kirkstone/build/arago-tmp-default-glibc/work/j721e_evm_k3r5-oe-linux-gnueabi/ti-sci-fw/2022.01-r3.2/temp/log.do_compile.165613
> >Log data follows:
> >| DEBUG: Executing shell function do_compile
> >| NOTE: make -j 64 CROSS_COMPILE=arm-oe-linux-gnueabi- SOC=j721e SOC_TYPE=gp
> >CONFIG=evm
> >SYSFW_DIR=/OE/arago-kirkstone/build/arago-tmp-default-glibc/work/j721e_evm_k3r5-oe-linux-gnueabi/ti-sci-fw/2022.01-r3.2/git/ti-sysfw
> >| ./gen_its.sh j721e gp evm out/soc/j721e/evm/sysfw.bin-gp
> >out/soc/j721e/evm/board-cfg.bin out/soc/j721e/evm/pm-cfg.bin
> >out/soc/j721e/evm/rm-cfg.bin out/soc/j721e/evm/sec-cfg.bin >
> >out/soc/j721e/evm/sysfw-j721e-evm.its
> >| /bin/sh: 1: cannot create out/soc/j721e/evm/sysfw-j721e-evm.its: Directory
> >nonexistent
> >| arm-oe-linux-gnueabi-gcc -fno-builtin -Wall -Iinclude/soc/j721e
> >-Isoc/j721e/evm -Iinclude -c -o out/soc/j721e/evm/board-cfg.o-pre-validated
> >./soc/j721e/evm/board-cfg.c
> >| Signing the SYSFW release image with ti-degenerate-key.pem key...
> >| make: *** [Makefile:208: out/soc/j721e/evm/sysfw-j721e-evm.its] Error 2
> >| make: *** Waiting for unfinished jobs....
> >| ./gen_x509_cert.sh -c m3 -b
> >/OE/arago-kirkstone/build/arago-tmp-default-glibc/work/j721e_evm_k3r5-oe-linux-gnueabi/ti-sci-fw/2022.01-r3.2/git/ti-sysfw/ti-fs-firmware-j721e-gp.bin
> > -o out/soc/j721e/evm/sysfw.bin-gp -l 0x40000 -k ti-degenerate-key.pem -r 1;
> >| python3 ./scripts/sysfw_boardcfg_validator.py -b
> >out/soc/j721e/evm/board-cfg.o-pre-validated -i -o
> >out/soc/j721e/evm/board-cfg.o -s j721e -l out/soc/j721e/evm/board-cfg.o.log
> >| Certificate being generated :
> >| LOADADDR = 0x00040000
> >| IMAGE_SIZE = 262112
> >| CERT_TYPE = 2
> >| SUCCESS: Image out/soc/j721e/evm/sysfw.bin-gp generated.
> >| rm out/soc/j721e/evm/board-cfg.o
> >| ERROR: oe_runmake failed
> >| WARNING: exit code 1 from a shell command.
> >ERROR: Task
> >(mc:k3r5:/OE/arago-kirkstone/sources/meta-ti/meta-ti-bsp/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb:do_compile)
> > failed with exit code '1'
> >
>
> Odd. I just tested the patches and did not get those errors...
Hmm, I wonder if what I hit was one of those race conditions in k3-image-gen?
Andrew, do you have any comments?
--
Denys
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#15896):
https://lists.yoctoproject.org/g/meta-ti/message/15896
Mute This Topic: https://lists.yoctoproject.org/mt/96991003/21656
Group Owner: [email protected]
Unsubscribe:
https://lists.yoctoproject.org/g/meta-ti/leave/6695321/21656/1393940836/xyzzy
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
