From: Jai Luthra <[email protected]> IMX390 is a 2MP FPDLink-III raw camera. This sensor was originally targeted for J7-based devices, but AM62A can re-use the existing overlays. Both the CM and RCM type of modules are supported.
As AM62A only has one CSI-RX port, we only use 4 out of the 8 total FPDLink ports on the fusion board. Signed-off-by: Jai Luthra <[email protected]> Signed-off-by: Ryan Eatmon <[email protected]> Signed-off-by: Denys Dmytriyenko <[email protected]> --- meta-ti-bsp/conf/machine/am62axx-evm.conf | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/meta-ti-bsp/conf/machine/am62axx-evm.conf b/meta-ti-bsp/conf/machine/am62axx-evm.conf index 12492095..9dcb6e55 100644 --- a/meta-ti-bsp/conf/machine/am62axx-evm.conf +++ b/meta-ti-bsp/conf/machine/am62axx-evm.conf @@ -12,6 +12,14 @@ KERNEL_DEVICETREE = " \ ti/k3-am62a7-fpdlink-ov2312-0-3.dtbo \ ti/k3-am62a7-fpdlink-sk-fusion.dtbo \ ti/k3-am62a7-sk-csi2-imx219.dtbo \ + ti/k3-j721e-fpdlink-imx390-cm-0-0.dtbo \ + ti/k3-j721e-fpdlink-imx390-cm-0-1.dtbo \ + ti/k3-j721e-fpdlink-imx390-cm-0-2.dtbo \ + ti/k3-j721e-fpdlink-imx390-cm-0-3.dtbo \ + ti/k3-j721e-fpdlink-imx390-rcm-0-0.dtbo \ + ti/k3-j721e-fpdlink-imx390-rcm-0-1.dtbo \ + ti/k3-j721e-fpdlink-imx390-rcm-0-2.dtbo \ + ti/k3-j721e-fpdlink-imx390-rcm-0-3.dtbo \ " UBOOT_MACHINE = "am62ax_evm_a53_defconfig" -- 2.25.1
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#16207): https://lists.yoctoproject.org/g/meta-ti/message/16207 Mute This Topic: https://lists.yoctoproject.org/mt/97728688/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/leave/6695321/21656/1393940836/xyzzy [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
