This was a temporary class to help with the v5.10 to v6.1 kernel migration, now that we have completed that, remove this class.
Suggested-by: Ryan Eatmon <[email protected]> Signed-off-by: Andrew Davis <[email protected]> --- .../classes/kernel-fitimage-ti-u-boot.bbclass | 214 ------------------ 1 file changed, 214 deletions(-) delete mode 100644 meta-ti-bsp/classes/kernel-fitimage-ti-u-boot.bbclass diff --git a/meta-ti-bsp/classes/kernel-fitimage-ti-u-boot.bbclass b/meta-ti-bsp/classes/kernel-fitimage-ti-u-boot.bbclass deleted file mode 100644 index 503c6d25..00000000 --- a/meta-ti-bsp/classes/kernel-fitimage-ti-u-boot.bbclass +++ /dev/null @@ -1,214 +0,0 @@ - -inherit ti-secdev - -# The TI u-boot requires that the kernel image is signed. To not overload the -# entire kernel-fitimage.bbclass from oe-core, we just overwrite one function -# and do the signing in there. - -# -# Assemble fitImage -# -# $1 ... .its filename -# $2 ... fitImage name -# $3 ... include ramdisk -fitimage_assemble() { - kernelcount=1 - dtbcount="" - DTBS="" - ramdiskcount=$3 - setupcount="" - bootscr_id="" - rm -f $1 arch/${ARCH}/boot/$2 - - if [ -n "${UBOOT_SIGN_IMG_KEYNAME}" -a "${UBOOT_SIGN_KEYNAME}" = "${UBOOT_SIGN_IMG_KEYNAME}" ]; then - bbfatal "Keys used to sign images and configuration nodes must be different." - fi - - fitimage_emit_fit_header $1 - - # - # Step 1: Prepare a kernel image section. - # - fitimage_emit_section_maint $1 imagestart - - uboot_prep_kimage - fitimage_ti_secure linux.bin linux.bin.sec - fitimage_emit_section_kernel $1 $kernelcount linux.bin.sec "$linux_comp" - - # - # Step 2: Prepare a DTB image section - # - - if [ -n "${KERNEL_DEVICETREE}" ]; then - dtbcount=1 - for DTB in ${KERNEL_DEVICETREE}; do - if echo $DTB | grep -q '/dts/'; then - bbwarn "$DTB contains the full path to the the dts file, but only the dtb name should be used." - DTB=`basename $DTB | sed 's,\.dts$,.dtb,g'` - fi - - # Skip ${DTB} if it's also provided in ${EXTERNAL_KERNEL_DEVICETREE} - if [ -n "${EXTERNAL_KERNEL_DEVICETREE}" ] && [ -s ${EXTERNAL_KERNEL_DEVICETREE}/${DTB} ]; then - continue - fi - - DTB_PATH="arch/${ARCH}/boot/dts/$DTB" - if [ ! -e "$DTB_PATH" ]; then - DTB_PATH="arch/${ARCH}/boot/$DTB" - fi - - DTB=$(echo "$DTB" | tr '/' '_') - - # Skip DTB if we've picked it up previously - echo "$DTBS" | tr ' ' '\n' | grep -xq "$DTB" && continue - - fitimage_ti_secure ${DTB_PATH} ${DTB_PATH}.sec - - DTBS="$DTBS $DTB" - fitimage_emit_section_dtb $1 $DTB ${DTB_PATH}.sec - done - fi - - if [ -n "${EXTERNAL_KERNEL_DEVICETREE}" ]; then - dtbcount=1 - for DTB in $(find "${EXTERNAL_KERNEL_DEVICETREE}" -name '*.dtb' -printf '%P\n' | sort) \ - $(find "${EXTERNAL_KERNEL_DEVICETREE}" -name '*.dtbo' -printf '%P\n' | sort); do - DTB=$(echo "$DTB" | tr '/' '_') - - # Skip DTB/DTBO if we've picked it up previously - echo "$DTBS" | tr ' ' '\n' | grep -xq "$DTB" && continue - - fitimage_ti_secure ${EXTERNAL_KERNEL_DEVICETREE}/${DTB} ${EXTERNAL_KERNEL_DEVICETREE}/${DTB}.sec - - DTBS="$DTBS $DTB" - fitimage_emit_section_dtb $1 $DTB "${EXTERNAL_KERNEL_DEVICETREE}/${DTB}.sec" - done - fi - - # - # Step 3: Prepare a u-boot script section - # - - if [ -n "${UBOOT_ENV}" ] && [ -d "${STAGING_DIR_HOST}/boot" ]; then - if [ -e "${STAGING_DIR_HOST}/boot/${UBOOT_ENV_BINARY}" ]; then - cp ${STAGING_DIR_HOST}/boot/${UBOOT_ENV_BINARY} ${B} - bootscr_id="${UBOOT_ENV_BINARY}" - fitimage_emit_section_boot_script $1 "$bootscr_id" ${UBOOT_ENV_BINARY} - else - bbwarn "${STAGING_DIR_HOST}/boot/${UBOOT_ENV_BINARY} not found." - fi - fi - - # - # Step 4: Prepare a setup section. (For x86) - # - if [ -e arch/${ARCH}/boot/setup.bin ]; then - setupcount=1 - fitimage_emit_section_setup $1 $setupcount arch/${ARCH}/boot/setup.bin - fi - - # - # Step 5: Prepare a ramdisk section. - # - if [ "x${ramdiskcount}" = "x1" ] && [ "${INITRAMFS_IMAGE_BUNDLE}" != "1" ]; then - # Find and use the first initramfs image archive type we find - found= - for img in ${FIT_SUPPORTED_INITRAMFS_FSTYPES}; do - initramfs_path="${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE_NAME}.$img" - initramfs_local="usr/${INITRAMFS_IMAGE_NAME}.$img" - if [ -e "$initramfs_path" ]; then - bbnote "Found initramfs image: $initramfs_path" - found=true - fitimage_ti_secure ${initramfs_path} ${initramfs_local}.sec - - fitimage_emit_section_ramdisk $1 "$ramdiskcount" "${initramfs_local}.sec" - break - else - bbnote "Did not find initramfs image: $initramfs_path" - fi - done - - if [ -z "$found" ]; then - bbfatal "Could not find a valid initramfs type for ${INITRAMFS_IMAGE_NAME}, the supported types are: ${FIT_SUPPORTED_INITRAMFS_FSTYPES}" - fi - fi - - fitimage_emit_section_maint $1 sectend - - # Force the first Kernel and DTB in the default config - kernelcount=1 - if [ -n "$dtbcount" ]; then - dtbcount=1 - fi - - # - # Step 6: Prepare a configurations section - # - fitimage_emit_section_maint $1 confstart - - # kernel-fitimage.bbclass currently only supports a single kernel (no less or - # more) to be added to the FIT image along with 0 or more device trees and - # 0 or 1 ramdisk. - # It is also possible to include an initramfs bundle (kernel and rootfs in one binary) - # When the initramfs bundle is used ramdisk is disabled. - # If a device tree is to be part of the FIT image, then select - # the default configuration to be used is based on the dtbcount. If there is - # no dtb present than select the default configuation to be based on - # the kernelcount. - if [ -n "$DTBS" ]; then - i=1 - for DTB in ${DTBS}; do - dtb_ext=${DTB##*.} - if [ "$dtb_ext" = "dtbo" ]; then - fitimage_emit_section_config $1 "" "$DTB" "" "$bootscr_id" "" "`expr $i = $dtbcount`" - else - fitimage_emit_section_config $1 $kernelcount "$DTB" "$ramdiskcount" "$bootscr_id" "$setupcount" "`expr $i = $dtbcount`" - fi - i=`expr $i + 1` - done - else - defaultconfigcount=1 - fitimage_emit_section_config $1 $kernelcount "" "$ramdiskcount" "$bootscr_id" "$setupcount" $defaultconfigcount - fi - - fitimage_emit_section_maint $1 sectend - - fitimage_emit_section_maint $1 fitend - - # - # Step 7: Assemble the image - # - ${UBOOT_MKIMAGE} \ - ${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \ - -f $1 \ - arch/${ARCH}/boot/$2 - - # - # Step 8: Sign the image and add public key to U-Boot dtb - # - if [ "x${UBOOT_SIGN_ENABLE}" = "x1" ] ; then - add_key_to_u_boot="" - if [ -n "${UBOOT_DTB_BINARY}" ]; then - # The u-boot.dtb is a symlink to UBOOT_DTB_IMAGE, so we need copy - # both of them, and don't dereference the symlink. - cp -P ${STAGING_DATADIR}/u-boot*.dtb ${B} - add_key_to_u_boot="-K ${B}/${UBOOT_DTB_BINARY}" - fi - ${UBOOT_MKIMAGE_SIGN} \ - ${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \ - -F -k "${UBOOT_SIGN_KEYDIR}" \ - $add_key_to_u_boot \ - -r arch/${ARCH}/boot/$2 \ - ${UBOOT_MKIMAGE_SIGN_ARGS} - fi -} - -fitimage_ti_secure() { - if test -n "${TI_SECURE_DEV_PKG}"; then - export TI_SECURE_DEV_PKG=${TI_SECURE_DEV_PKG} - ${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh $1 $2 - else - cp $1 $2 - fi -} - -- 2.39.2
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#17292): https://lists.yoctoproject.org/g/meta-ti/message/17292 Mute This Topic: https://lists.yoctoproject.org/mt/102508120/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
