Thanks a lot Denys for the knowledge... The order of the layers was indeed important.. It worked, now building core-image-minimal.. and sato.! I now hope switching to 2.6.32 kernel should be a cakewalk..! :)
Best, --------------------------------- Sudhangathan BS Ph:(+91) 9731-905-205 --------------------------------- On Thu, Jun 13, 2013 at 11:58 PM, Denys Dmytriyenko <[email protected]> wrote: > On Thu, Jun 13, 2013 at 03:22:03PM +0530, Sudhangathan B S wrote: > > Hello all, > > > > I'm trying to integrate meta-ti with Yocto/poky, since I need to add the > > 2.6.32 kernel for the beableboard image. > > > > Can I please know how to download the correct version, i.e. i'm using > > danny-8.0, so for this, which version of the meta-ti and meta-oe should I > > download, and from where.. and also after downloading where should I put > > these folders (correct location for each).. > > > > I downloaded the danny branch of yocto, meta-ti, meta-oe and also the > danny > > branch of openembedded-core as the dependency. Is it correct.? > > > > Is there is weblink that I can follow..? > > > > For now, this is the error i'm getting.. > > > > *danny-8.0/build$ bitbake -k core-image-minimal* > > *Pseudo is not present but is required, building this first before the > main > > build* > > *WARNING: Host distribution "Ubuntu 12.04.2 LTS" has not been validated > > with this version of the build system; you may possibly experience > > unexpected failures. It is recommended that you use a tested > distribution.* > > *Loading cache: 100% > > > |################################################################################################################################| > > ETA: 00:00:00* > > *Loaded 22 entries from dependency cache.* > > *ERROR: ExpansionError during parsing > > /home/suan/danny-try/danny-8.0/meta-ti/recipes-ti/local-power-manager/ > > ti-local-power-manager_1.24.02.09.bb: Failure expanding variable > FILESPATH, > > expression was ${@base_set_filespath([ > > > "/home/suan/danny-try/danny-8.0/meta-ti/recipes-ti/local-power-manager/ti-local-power-manager-1_1_24_02_09-${MACHINE_KERNEL_PR}e", > > > "/home/suan/danny-try/danny-8.0/meta-ti/recipes-ti/local-power-manager/ti-local-power-manager-1_24_02_09", > > > "/home/suan/danny-try/danny-8.0/meta-ti/recipes-ti/local-power-manager/ti-local-power-manager", > > > "/home/suan/danny-try/danny-8.0/meta-ti/recipes-ti/local-power-manager/ti-local-power-manager-1_24_02_09", > > > "/home/suan/danny-try/danny-8.0/meta-ti/recipes-ti/local-power-manager/ti-local-power-manager", > > > "/home/suan/danny-try/danny-8.0/meta-ti/recipes-ti/local-power-manager/files", > > "/home/suan/danny-try/danny-8.0/meta-ti/recipes-ti/local-power-manager" > ], > > d)} which triggered exception SyntaxError: EOL while scanning string > > literal (FILESPATH, line 1)* > > This error is caused by including meta-yocto-bsp and meta-ti layers that > both > define "beagleboard" machine config. You have meta-yocto-bsp configured > before > meta-ti in your bblayers.conf, which takes the beagleboard definition from > meta-yocto-bsp layer, so you can't safely use corresponding recipes from > meta-ti. You should swap those two layers or just drop meta-yocto-bsp > completely. > > -- > Denys > > > *ERROR: Command execution failed: Exited with 1* > > * > > * > > *Summary: There was 1 WARNING message shown.* > > *Summary: There were 2 ERROR messages shown, returning a non-zero exit > code. > > * > > > > I hope this is not version mismatch problem..!! may be yes..! > > > > --------------------------------- > > Sudhangathan BS > > Ph:(+91) 9731-905-205 > > --------------------------------- > > > > > > On Wed, Jun 5, 2013 at 11:35 AM, Nicolas Dechesne < > > [email protected]> wrote: > > > > > > > > On Wed, Jun 5, 2013 at 7:55 AM, Akshay Sahota <[email protected] > >wrote: > > > > > >> * > > >> BBMASK ?= ".*/meta-ti/recipes-(misc|bsp/formfactor|graphics/mesa)/" > > >> #BBMASK = "meta-ti/recipes-misc meta-oe/recipes-graphics" > > >> #BBMASK = "meta-oe/recipes-devtools" > > >> #BBMASK = "meta-oe/recipes-graphics" > > >> # > > >> # Parallelism Options*... > > >> > > >> > > >> and bblayers.conf > > >> > > >> *BBLAYERS ?= " \ > > >> /home/asahota/poky-try/poky/meta \ > > >> /home/asahota/poky-try/poky/meta-yocto \ > > >> /home/asahota/poky-try/poky/meta-yocto-bsp \ > > >> /home/asahota/poky-try/poky/meta-ti \ > > >> /home/asahota/poky-try/poky/meta-openembedded/meta-oe \ > > >> " > > >> * > > >> > > > > > > i suspect you are using wrong combination of branch/version, but you > don't > > > give what branch/version you are using, not cannot confirm. > > > > > > > > >> * > > >> BBLAYERS_NON_REMOVABLE ?= " \ > > >> /home/asahota/poky-try/poky/meta \ > > >> /home/asahota/poky-try/poky/meta-yocto \ > > >> "* > > >> > > >> and the output is : > > >> *$ bitbake -k core-image-minimal > > >> Pseudo is not present but is required, building this first before the > > >> main build > > >> WARNING: Host distribution "Ubuntu 12.04.2 LTS" has not been validated > > >> with this version of the build system; you may possibly experience > > >> unexpected failures. It is recommended that you use a tested > distribution. > > >> ERROR: ParseError at > > >> > /home/asahota/poky-try/poky/meta-openembedded/meta-oe/recipes-devtools/cloud9/ > > >> cloud9_0.6.bb:11: Could not inherit file classes/systemd.bbclass > > >> * > > >> > > > > > > systemd.bbclass was introduced in 'dylan' version of Yocto (aka 1.4). > are > > > you sure this is what you are using? to be it sounds like you are using > > > Yocto/danny with meta-ti and meta-oe 'master' branch (or dylan branch). > > > > > > > > > *ERROR: Command execution failed: Exited with 1 > > >> > > >> Summary: There was 1 WARNING message shown. > > >> Summary: There were 2 ERROR messages shown, returning a non-zero exit > > >> code. > > >> * > > >> What is the mistake, sounds too silly.! > > > > > > > > > > > > > > > _______________________________________________ > > > yocto mailing list > > > [email protected] > > > https://lists.yoctoproject.org/listinfo/yocto > > > > > > > > > _______________________________________________ > > meta-ti mailing list > > [email protected] > > https://lists.yoctoproject.org/listinfo/meta-ti > >
_______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
