On Mon, Jul 08, 2013 at 02:30:47PM -0400, Robert P. J. Day wrote: > On Mon, 8 Jul 2013, Tom Rini wrote: > > > On Sun, Jul 07, 2013 at 08:00:05AM -0400, Robert P. J. Day wrote: > > > > > U-Boot SPL 2013.01.01 (Jul 06 2013 - 18:41:10) > > > OMAP SD/MMC: 0 > > > ** Partition 1 not valid on device 0 ** > > > spl: fat register err - -1 > > > ### ERROR ### Please RESET the board ### > > > > > > this is exactly the same SD card i was using with meta-beagleboard > > > generated image files. everything else about the build seemed fine. > > > can someone verify a known good recipe for this? is there > > > something different about the creation of the SD card? i'm currently > > > doing another build from scratch to see if i messed anything up. > > > > Can you see if backporting > > http://git.denx.de/?p=u-boot.git;a=commitdiff;h=9d956e0fefa39ba49250f61e3c7aa3dadafdb7fd > > fixes the problem? It should apply cleanly. Thanks! > > i'll give that a shot this evening and let you know. just to recap, > i used OE and the meta-beagleboard layer to build for my BBB and > copied to the first (bootable FAT) partition nothing but the MLO and > u-boot.img images, and that let me boot to u-boot, which is all i was > after.
Strange. meta-beagleboard is on v2013.04 which doesn't have that change. > i then did an OE build using meta-ti, copied *those* generated MLO > and u-boot.img files to the same SD card, and promptly got the error > above. so that would suggest that the meta-beagleboard layer has > something equivalent to that patch, while meta-ti doesn't. > > anyway, will report back with results ASAP. If it fails, can you dd off the card, compress it and share a copy with me off-list (I can provide a dropbox drop spot if needed), thanks! -- Tom _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
