Is this resolved - were you able to generate the image ? I seem to be having a similar issue,
regards, Prabu -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dmytriyenko, Denys Sent: Thursday, August 15, 2013 1:00 AM To: Christian Gagneraud Cc: [email protected] Subject: Re: [meta-ti] unable to fetch a repository mentioned in SRC_URI On Thu, Aug 15, 2013 at 08:28:37AM +1200, Christian Gagneraud wrote: > On 08/12/2013 06:27 AM, Denys Dmytriyenko wrote: > >On Tue, Aug 06, 2013 at 11:43:08AM +0000, Prathamesh P Ghanekar wrote: > >>Hello, > >> > >>I am trying to integrate meta-ti layer into the current yocto > >>project. I wish to build the image for pandaboard. > >> > >>I am adding another layer called meta-ivi in the yocto kernel which > >>provided functionality for in-vehicle infotainment systems. In the > >>meta-ivi layer, there is a recipe "foton-image", which builds GENIVI > >>compliant baseline image. Also, few recipes were masked to resolve the > >>license issue. > >> > >>So, setting all the variables in the conf/local.conf and > >>conf/bblayers.conf file, I build the image as follows. > >> > >> > >>รจ bitbake foton-image > >> > >> > >>I ended up with following error, which indicates that there's a failure in > >>fetching the repository. > >> > >>Here is the output log for your reference: > >> > >>prathamesh@mintos ~/workdir/poky-dylan-9.0.1/build $ bitbake > >>foton-image Loading cache: 100% > >>|###################################################################################################################################| > >> ETA: 00:00:00 Loaded 1220 entries from dependency cache. > >> > >>Build Configuration: > >>BB_VERSION = "1.18.0" > >>BUILD_SYS = "i686-linux" > >>NATIVELSBSTRING = "LinuxMint-14" > >>TARGET_SYS = "arm-oe-linux-gnueabi" > >>MACHINE = "pandaboard" > >>DISTRO = "poky-ivi-systemd" > >>DISTRO_VERSION = "4.0.2" > >>TUNE_FEATURES = "armv7a vfp neon" > >>TARGET_FPU = "vfp-neon" > >>meta > >>meta-yocto > >>meta-yocto-bsp > >>meta-ivi-4.0.2 = "<unknown>:<unknown>" > >>meta-ti = "master:c14c386946e1ea341faeea292580e37d538d645d" > >> > >>NOTE: Resolving any missing task queue dependencies > >>NOTE: multiple providers are available for u-boot (u-boot, > >>u-boot-ti-staging) > >>NOTE: consider defining a PREFERRED_PROVIDER entry to match u-boot > >>NOTE: Preparing runqueue > >>NOTE: Executing SetScene Tasks > >>NOTE: Executing RunQueue Tasks > >>WARNING: Failed to fetch URL > >>git://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protoco > >>l=git;branch=ti-ubuntu-3.4-1487<http://dev.omapzoom.org/pub/scm/inte > >>gration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487>, > >>attempting MIRRORS if available > >>ERROR: Fetcher failure: Fetch command failed with exit code 128, output: > >>Cloning into bare repository > >>'/home/prathamesh/workdir/poky-dylan-9.0.1/build/downloads/git2/dev.omapzoom.org.pub.scm.integration.kernel-ubuntu.git'... > >> > >>fatal: The remote end hung up unexpectedly > >>fatal: early EOF > >>fatal: index-pack failed > >It seems you had your connection terminated unexpectedly... Have you > >tried it again? Does it happen every time? > >BTW, seems to work fine here... > > I ran into similar problems recently (strange git failure), but as I > didn't have strong need to build new stuff, I simply gave up straight > away and switched to another task. > The only "odd" thing I have here, is a *@#$! proxy. I am located in > New Zealand. And some of our engineers are having weird issues with the proxy as well. Probably a moon phase... :) -- Denys > >>ERROR: Function failed: Fetcher failure for URL: > >>'git://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487<http://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487>'. > >> Unable to fetch URL from any source. > >>ERROR: Logfile of failure stored in: > >>/home/prathamesh/workdir/poky-dylan-9.0.1/build/tmp-eglibc-eglibc/work/pandaboard-oe-linux-gnueabi/linux-omap4/3.4-r0/temp/log.do_fetch.4257 > >>ERROR: Task 910 > >>(/home/prathamesh/workdir/meta-ti/recipes-kernel/linux/linux-omap4_3.4.bb<http://linux-omap4_3.4.bb>, > >> do_fetch) failed with exit code '1' > >>NOTE: Tasks Summary: Attempted 2323 tasks of which 2231 didn't need to be > >>rerun and 1 failed. > >>Waiting for 0 running tasks to finish: > >> > >>Summary: 1 task failed: > >> > >> /home/prathamesh/workdir/meta-ti/recipes-kernel/linux/linux-omap4_3.4.bb<http://linux-omap4_3.4.bb>, > >> do_fetch > >>Summary: There was 1 WARNING message shown. > >>Summary: There were 2 ERROR messages shown, returning a non-zero exit code. > >> > >>Note: > >>1. I have successfully built the foton-image for target vexpressa9, and it > >>boots without any errors in the qemu emulator. > >>2. I am able to 'git clone' the above mentioned repository. If you could let > >>me know how can I use the local repository for build process. I tried > >>copying the repository in downloads folder, but it did not work somehow. > >You need to get a bare repository and place it into: > >downloads/git2/dev.omapzoom.org.pub.scm.integration.kernel-ubuntu.git > > > > _______________________________________________ > meta-ti mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-ti _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
