Acked-by: Chase Maupin <[email protected]> Although, I would ask why not call it _3.12 instead of _git. But I'm OK either way, just we will need to cut an _3.12 at some point.
>-----Original Message----- >From: [email protected] [mailto:meta-ti- >[email protected]] On Behalf Of Denys Dmytriyenko >Sent: Friday, August 23, 2013 2:58 PM >To: [email protected] >Subject: [meta-ti] [PATCH 1/4] linux-ti-staging: add the latest >integration tree in prep for 3.12 release > >From: Denys Dmytriyenko <[email protected]> > >Signed-off-by: Denys Dmytriyenko <[email protected]> >--- > recipes-kernel/linux/linux-ti-staging_git.bb | 42 >++++++++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > create mode 100644 recipes-kernel/linux/linux-ti-staging_git.bb > >diff --git a/recipes-kernel/linux/linux-ti-staging_git.bb >b/recipes-kernel/linux/linux-ti-staging_git.bb >new file mode 100644 >index 0000000..cb59dbb >--- /dev/null >+++ b/recipes-kernel/linux/linux-ti-staging_git.bb >@@ -0,0 +1,42 @@ >+SECTION = "kernel" >+DESCRIPTION = "Linux kernel for TI devices" >+LICENSE = "GPLv2" >+LIC_FILES_CHKSUM = >"file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7" >+KERNEL_IMAGETYPE = "uImage" >+ >+inherit kernel >+ >+require recipes-kernel/linux/linux-dtb.inc >+require recipes-kernel/linux/setup-defconfig.inc >+ >+# Add a run-time dependency for the PM firmware to be installed >+# on the target file system. >+RDEPENDS_kernel-base_ti33x += "am33x-cm3 am33x-cm3-initscript" >+ >+# Default is to package all dts files for ti33x devices unless >building >+# for the specific beaglebone machine. >+KERNEL_DEVICETREE_ti33x = "arch/arm/boot/dts/am335x-evm.dts >arch/arm/boot/dts/am335x-evmsk.dts arch/arm/boot/dts/am335x- >bone.dts" >+KERNEL_DEVICETREE_am437x-evm = "arch/arm/boot/dts/am43x-epos- >evm.dts" >+KERNEL_DEVICETREE_beaglebone = "arch/arm/boot/dts/am335x- >bone.dts" >+KERNEL_DEVICETREE_omap5-evm = "arch/arm/boot/dts/omap5-sevm.dts >arch/arm/boot/dts/omap5-uevm.dts" >+KERNEL_DEVICETREE_dra7xx-evm = "arch/arm/boot/dts/dra7-evm.dts" >+ >+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}" >+ >+COMPATIBLE_MACHINE = "ti33x|ti43x|omap-a15" >+ >+DEFAULT_PREFERENCE = "-1" >+ >+S = "${WORKDIR}/git" >+ >+BRANCH = "ti-linux-3.12.y" >+ >+SRCREV = "b36f4be3de1b123d8601de062e7dbfc904f305fb" >+PV = "3.10+3.11-rc6" >+ >+# Append to the MACHINE_KERNEL_PR so that a new SRCREV will cause >a rebuild >+MACHINE_KERNEL_PR_append = "a+gitr${SRCPV}" >+ >+SRC_URI = "git://git.ti.com/ti-linux-kernel/ti-linux- >kernel.git;protocol=git;branch=${BRANCH} \ >+ file://defconfig \ >+ " >-- >1.8.3.2 > >_______________________________________________ >meta-ti mailing list >[email protected] >https://lists.yoctoproject.org/listinfo/meta-ti _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
