Now I'm just wondering what PG version of the board you've got, if it fails in the same way with our 3.8 kernel and a known good set of 3.12 images...
On Mon, Oct 21, 2013 at 11:19:35PM +0100, Rudolf Streif wrote: > Thanks, Denys. > > Interesting point about gcc. It's version 4.8.1 which is the default for > poky master. Which is what I used all along. > > Thanks for sending your binaries. They fail too with the exact same > problem. See attached log. I found [1] on gmane which exactly describes the > problem I am seeing. > > If that is the case then I was wondering why my earlier builds with > 3.12-rc3 actually worked. And I tried them again and they are now failing > too. Of course I don't know anything about the specifics of the gpio and > the timers on the chip but it looks like a weird hardware initialization > condition. And I don't know if the proposed patch in [1] was ever > incorporated in your kernel tree. > > I don't think it's the hardware (or at least not alone) because the SD that > ships with it with the 3.2 kernel works just fine. > > Cheers, > Rudi > > > [1] http://permalink.gmane.org/gmane.linux.ports.arm.omap/96044 > > > On Mon, Oct 21, 2013 at 10:15 PM, Denys Dmytriyenko <[email protected]> wrote: > > > Rudi, > > > > As we discussed earlier today, let my send you my binaries for the kernel > > and > > u-boot to try on your board. I just wanted to ask you about the toolchain > > that > > you used to build yours. In our builds we use Linaro gcc-4.7 hardfp > > toolchain > > and I vaguely remember hearing about some problems with the recent gcc-4.8 > > toolchain from oe-core... I'm wondering if you are having the same issue. > > > > -- > > Denys > > > > > > On Mon, Oct 21, 2013 at 10:42:35AM -0700, Rudolf Streif wrote: > > > Since the 3.12-rc5 kernel does not work I decided to give the 3.8 kernel > > a > > > try. The issue with this one is that the linux-ti-staging_3.8.bb recipe > > > explicitly sets KERNEL_IMAGETYPE="uImage". However, the u-boot > > environment > > > has now moved on to using zImage which consequently means u-boot will not > > > find the kernel file. > > > > > > I do not know why KERNEL_IMAGETYPE = "uImage" was hacked into the > > > linux-ti-staging_3.8.bb recipe but whoever did it did not think about > > > u-boot. Does zImage not work with 3.8? I did not try it but it should > > > normally have no effect. Since there is no dependency of the u-boot > > recipes > > > on the kernel image types changes to the kernel image type for newer > > > versions of the kernel then automatically means that it must be changed > > for > > > the previous versions too. > > > > > > I mocked around with the u-boot environment and booted the 3.8 uImage > > > kernel. To my surprise the 3.8 kernel from the TI staging repository > > fails > > > with the exact same problem and stops booting with a kernel not syncing > > > message during the init calls. Apparently a patch must have been applied > > to > > > the kernel repo that breaks it. It has nothing possibly to do with the > > > build system. > > > > > > I would appreciate any hints to get this kernel built and boot on the > > board. > > > > > > Thanks, > > > Rudi > > > > > > > > > On Mon, Oct 21, 2013 at 1:16 AM, Rudolf Streif > > > <[email protected]>wrote: > > > > > > > Denys, > > > > > > > > I recompiled the 3.12-rc5 kernel again but it still stalls during > > > > initialization. I attached the boot log. I don't know much about the > > > > platform details but maybe that's an issue you know about. > > > > > > > > Thanks, > > > > Rudi > > > > > > > > > > > > > > > >> > > > >> [1] > > > >> Build Configuration: > > > >> BB_VERSION = "1.21.0" > > > >> BUILD_SYS = "x86_64-linux" > > > >> NATIVELSBSTRING = "Fedora-18" > > > >> TARGET_SYS = "arm-poky-linux-gnueabi" > > > >> MACHINE = "am335x-evm" > > > >> DISTRO = "poky" > > > >> DISTRO_VERSION = "1.5+snapshot-20131019" > > > >> TUNE_FEATURES = "armv7a vfp neon" > > > >> TARGET_FPU = "vfp-neon" > > > >> meta-yocto = "master:9a1dce10bdc9254bb38e0e54199f23ae55e209a4" > > > >> meta-ti = "master:c11504664990f007c3903d349e7cc135a904f8e2" > > > >> meta-oe = "master:f8903f53db717294d63a8d79b5ef7ca34b3c189e" > > > >> meta = "master:9a1dce10bdc9254bb38e0e54199f23ae55e209a4" > > > >> > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > -- > > > *Rudolf J. Streif* > > > Director of Embedded Solutions > > > The Linux Foundation > > > > > > [email protected] > > > Phone: +1.619.537.6646 > > > Skype: rudolfstreif > > > PGP: RSA 2048/2048 D6E7D28B > > > > > > Linux Foundation Events Schedule: events.linuxfoundation.org > > > Linux Foundation Training Schedule: training.linuxfoundation.org > > > > > _______________________________________________ > > > meta-ti mailing list > > > [email protected] > > > https://lists.yoctoproject.org/listinfo/meta-ti > > > > > > > -- > -- > *Rudolf J. Streif* > Director of Embedded Solutions > The Linux Foundation > > [email protected] > Phone: +1.619.537.6646 > Skype: rudolfstreif > PGP: RSA 2048/2048 D6E7D28B > > Linux Foundation Events Schedule: events.linuxfoundation.org > Linux Foundation Training Schedule: training.linuxfoundation.org _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
