Missing DTB files: http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto/tree/README.hardware#n190
Sent from my Android phone using TouchDown (www.nitrodesk.com) -----Original Message----- From: Miroslav Keš [[email protected]] Received: Monday, 07 Jul 2014, 9:36 To: [email protected] [[email protected]] Subject: [meta-ti] BeagleBoard / Beagleboard-xM build Hi! I tried to build the kernel plus core-image-minimal for BeagleBoard using just BBLAYERS ?= " \ ${OEBASE}/meta-ti \ ${OEBASE}/openembedded-core/meta \ " The build completed OK but the boot process hangs on both BeagleBoard and Beagleboard-xM after the "booting the kernel" message (see the output bellow). I have spent 3 days googling on potential reasons. I found some people having similar problems but it looks like the kernel debugging options are turned on in the kernel configuration and the ttyO2 should be OK for kernel 3.2.28 I would appreciate if someone could answer these questions: 1) Is it good idea trying to build the BeagleBoard distro using just meta-ti and openembedded-core (i.e. without Angstrom)? 2) Is there particular combination of meta-ti and openembedded-core versions that should be used? 3) What is the relationship between meta-ti and meta-beagleboard (it looks like meta-ti supports beagleboards while meta-beagleboard supports beaglebone) Any hints would be really welcome Mira --------------------------------------------------------------------- Welcome to minicom 2.6 OPTIONS: I18n Compiled on Nov 18 2013, 11:01:02. Port /dev/ttyS0 Press CTRL-A Z for help on special keys ...40V...þ U-Boot SPL 2011.09-01172-gfdbe8b9-dirty (Jul 02 2014 - 14:36:18) Texas Instruments Revision detection unimplemented OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2011.09-01172-gfdbe8b9-dirty (Jul 02 2014 - 14:36:18) OMAP3530-GP ES3.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 256 MiB WARNING: Caches not enabled NAND: 256 MiB MMC: OMAP SD/MMC: 0 In: serial Out: serial Err: serial Beagle Rev C1/C2/C3 timed out in wait_for_pin: I2C_STAT=0 I2C read: I/O error Unrecognized expansion board: 0 timed out in wait_for_pin: I2C_STAT=0 I2C read: I/O error Unrecognized expansion board: 0 Die ID #5ac400030000000004013f8901001001 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 OMAP3 beagleboard.org # mmc rescan OMAP3 beagleboard.org # setenv bootargs console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootdelay=1 OMAP3 beagleboard.org # fatload mmc 0:1 0x80000000 uImage reading uImage 4337768 bytes read OMAP3 beagleboard.org # bootm 0x80000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Linux-3.2.28 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4337704 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. -- _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
-- _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
