Don't use beaglebone machine from meta-yocto-bsp, but instead use beaglebone machine from meta-ti, if you want to use other components from meta-ti...
-- Denys On Thu, Aug 14, 2014 at 03:40:54PM +0200, Carlos Rafael Giani wrote: > Hello, > > I have a BeagleBone black here, and want to build a rootfs for it > with Yocto. It shall include support for the SGX GPU. > > But when I try to build this, I get: > > ERROR: Nothing PROVIDES 'libgles-omap3' > ERROR: libgles-omap3 was skipped: incompatible with machine > beaglebone (not in COMPATIBLE_MACHINE) > ERROR: libgles-omap3 was skipped: incompatible with machine > beaglebone (not in COMPATIBLE_MACHINE) > ERROR: libgles-omap3-x11 PROVIDES libgles-omap3 but was skipped: > incompatible with machine beaglebone (not in COMPATIBLE_MACHINE) > ERROR: libgles-omap3 was skipped: incompatible with machine > beaglebone (not in COMPATIBLE_MACHINE) > > However, this is incorrect. The BeagleBone Black has an AM3359 SoC, > which does have the SGX, so it is compatible. Looking into the > recipe, it lists ti33x as being compatible, yet the build breaks. I > fixed this locally by adding "beaglebone" to the list of compatible > machines, but of course this is a hack. > > Does anybody have some insight into this? Is "beaglebone" perhaps > the wrong machine for the BeagleBone black? I didn't find any > machine config called "bblack" or "beagleboneblack" or similar. > > cheers > -- > _______________________________________________ > meta-ti mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-ti -- _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
