Hongmei, Both of these patches have been merged on September 5 and rebased on top of every RC tag since then:
https://lists.yoctoproject.org/pipermail/meta-ti/2017-September/010365.html -- Denys On Mon, Sep 25, 2017 at 05:52:50PM +0000, Gou, Hongmei wrote: > Ping... > > > -----Original Message----- > > From: Gou, Hongmei > > Sent: Tuesday, September 05, 2017 6:13 PM > > To: [email protected] > > Cc: Gou, Hongmei > > Subject: [meta-ti] [PATCH] linux-ti-staging: include pru-uio device tree > > files > > for am571x and k2g > > > > * The pru-uio device tree file for am572x is also updated to support > > icss-emac-lld in Linux userspace. > > > > * The new dtbs are added only if ENABLE_TI_UIO_DEVICES is enabled. > > > > Signed-off-by: Hongmei Gou <[email protected]> > > --- > > .../linux/files/dra7xx/am571x-pru-uio.dtsi | 284 +++++++++++++++ > > .../linux/files/dra7xx/am572x-pru-uio.dtsi | 263 ++++++++------ > > .../linux/files/k2g/keystone-k2g-pru-uio.dtsi | 391 > > +++++++++++++++++++++ > > recipes-kernel/linux/ti-uio.inc | 26 +- > > 4 files changed, 859 insertions(+), 105 deletions(-) create mode 100644 > > recipes-kernel/linux/files/dra7xx/am571x-pru-uio.dtsi > > create mode 100644 recipes-kernel/linux/files/k2g/keystone-k2g-pru- > > uio.dtsi > > > > diff --git a/recipes-kernel/linux/files/dra7xx/am571x-pru-uio.dtsi > > b/recipes- > > kernel/linux/files/dra7xx/am571x-pru-uio.dtsi > > new file mode 100644 > > index 0000000..71e0516 > > --- /dev/null > > +++ b/recipes-kernel/linux/files/dra7xx/am571x-pru-uio.dtsi > > @@ -0,0 +1,284 @@ > > +&pruss_soc_bus1 { > > + uio_pruss1_mdio { > > + status = "okay"; > > + > > + compatible = "ti,davinci_mdio"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + clocks = <&dpll_gmac_h13x2_ck>; > > + clock-names = "fck"; > > + bus_freq = <1000000>; > > + reg = <0x4b232400 0x90>; > > + > > + reset-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; > > + reset-delay-us = <2>; /* PHY datasheet states > > 1uS min */ > > + uio_pruss1_eth0_phy: uio_ethernet-phy@0 { > > + reg = <0>; > > + }; > > + > > + uio_pruss1_eth1_phy: uio_ethernet-phy@1 { > > + reg = <1>; > > + }; > > + }; > > + > > + uio_pruss1_mem: uio_pruss1_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x4b200000 0x2000>, > > + <0x4b202000 0x2000>, > > + <0x4b210000 0x8000>, > > + <0x4b220000 0x5404>, > > + <0x4b226000 0x474>, > > + <0x4b22e000 0xc04>, > > + <0x4b232000 0x154>; > > + mem-names = "dram0", "dram1", "shrdram2", "intc", > > "cfg", > > + "iep", "mii_rt"; > > + status = "okay"; > > + }; > > + uio_pruss1_mem2: uio_pruss1_mem2 { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x4b228000 0xd4>, > > + <0x4b230000 0x174>, > > + <0x4b232400 0x234>, > > + <0x40300000 0x40000>; > > + mem-names = "uart", "ecap", "mdio", "ocmc"; > > + status = "okay"; > > + }; > > + uio_pruss1_evt0: uio_pruss1_evt0 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt1: uio_pruss1_evt1 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt2: uio_pruss1_evt2 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt3: uio_pruss1_evt3 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt4: uio_pruss1_evt4 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt5: uio_pruss1_evt5 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt6: uio_pruss1_evt6 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt7: uio_pruss1_evt7 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + > > + uio_pruss1_0_mem: uio_pruss1_0_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x4b234000 0x3000>, > > + <0x4b222000 0xb4>, > > + <0x4b222400 0x3f4>; > > + mem-names = "iram", "control", "debug"; > > + status = "okay"; > > + }; > > + > > + uio_pruss1_1_mem: uio_pruss1_1_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x4b238000 0x3000>, > > + <0x4b224000 0xb4>, > > + <0x4b224400 0x3f4>; > > + mem-names = "iram", "control", "debug"; > > + status = "okay"; > > + }; > > +}; > > + > > +&pruss_soc_bus2 { > > + uio_pruss2_mdio { > > + compatible = "ti,davinci_mdio"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + clocks = <&dpll_gmac_h13x2_ck>; > > + clock-names = "fck"; > > + bus_freq = <1000000>; > > + reg = <0x4b2b2400 0x90>; > > + status = "okay"; > > + > > + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; > > + reset-delay-us = <2>; /* PHY datasheet states > > 1uS min */ > > + > > + uio_pruss2_eth0_phy: ethernet-phy@0 { > > + reg = <0>; > > + }; > > + > > + uio_pruss2_eth1_phy: ethernet-phy@1 { > > + reg = <1>; > > + }; > > + }; > > + > > + uio_pruss2_mem: uio_pruss2_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x4b280000 0x2000>, > > + <0x4b282000 0x2000>, > > + <0x4b290000 0x8000>, > > + <0x4b2a0000 0x5404>, > > + <0x4b2a6000 0x474>, > > + <0x4b2ae000 0xc04>, > > + <0x4b2b2000 0x154>; > > + mem-names = "dram0", "dram1", "shrdram2", "intc", > > "cfg", > > + "iep", "mii_rt"; > > + status = "okay"; > > + }; > > + uio_pruss2_mem2: uio_pruss2_mem2 { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x4b2a8000 0xd4>, > > + <0x4b2b0000 0x174>, > > + <0x4b2b2400 0x234>, > > + <0x40340000 0x40000>; > > + mem-names = "uart", "ecap", "mdio", "ocmc"; > > + status = "okay"; > > + }; > > + uio_pruss2_evt0: uio_pruss2_evt0 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt1: uio_pruss2_evt1 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt2: uio_pruss2_evt2 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt3: uio_pruss2_evt3 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt4: uio_pruss2_evt4 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt5: uio_pruss2_evt5 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt6: uio_pruss2_evt6 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt7: uio_pruss2_evt7 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + > > + uio_pruss2_0_mem: uio_pruss2_0_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x4b2b4000 0x3000>, > > + <0x4b2a2000 0xb4>, > > + <0x4b2a2400 0x3f4>; > > + mem-names = "iram", "control", "debug"; > > + status = "okay"; > > + }; > > + uio_pruss2_1_mem: uio_pruss2_1_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x4b2b8000 0x3000>, > > + <0x4b2a4000 0xb4>, > > + <0x4b2a4400 0x3f4>; > > + mem-names = "iram", "control", "debug"; > > + status = "okay"; > > + }; > > + }; > > + > > +&pruss1_eth { > > + status = "disabled"; > > +}; > > + > > +&pruss1_emac0 { > > + status = "disabled"; > > +}; > > + > > +&pruss1_emac1 { > > + status = "disabled"; > > +}; > > + > > +&pruss2_emac0 { > > + status = "disabled"; > > +}; > > + > > +&pruss2_emac1 { > > + status = "disabled"; > > +}; > > + > > +&pruss1 { > > + status = "disabled"; > > +}; > > + > > +&pru1_0 { > > + status = "disabled"; > > +}; > > + > > +&pru1_1 { > > + status = "disabled"; > > +}; > > + > > +&pruss1_intc { > > + status = "disabled"; > > +}; > > + > > +&pruss1_mdio { > > + status = "disabled"; > > +}; > > + > > +&pruss2 { > > + status = "disabled"; > > +}; > > + > > +&pru2_0 { > > + status = "disabled"; > > +}; > > + > > +&pru2_1 { > > + status = "disabled"; > > +}; > > + > > +&pruss2_intc { > > + status = "disabled"; > > +}; > > + > > +&pruss2_mdio { > > + status = "disabled"; > > +}; > > diff --git a/recipes-kernel/linux/files/dra7xx/am572x-pru-uio.dtsi > > b/recipes- > > kernel/linux/files/dra7xx/am572x-pru-uio.dtsi > > index 828a0ce..f149cf1 100644 > > --- a/recipes-kernel/linux/files/dra7xx/am572x-pru-uio.dtsi > > +++ b/recipes-kernel/linux/files/dra7xx/am572x-pru-uio.dtsi > > @@ -1,92 +1,124 @@ > > -/ { > > - ocp { > > - pruss2_eth { > > - status = "disabled"; > > - }; > > - uio_pruss1_mem: uio_pruss1_mem { > > - compatible = "ti,uio-module-drv"; > > - ti,hwmods = "pruss1"; > > - mem = <0x4b200000 0x2000>, > > - <0x4b202000 0x2000>, > > - <0x4b210000 0x8000>, > > - <0x4b220000 0x2000>, > > - <0x4b226000 0x2000>, > > - <0x4b22e000 0x31c>, > > - <0x4b232000 0x58>; > > - mem-names = "dram0", "dram1", "shrdram2", "intc", > > "cfg", > > - "iep", "mii_rt"; > > - status = "okay"; > > - }; > > - uio_pruss1_mem2: uio_pruss1_mem2 { > > - compatible = "ti,uio-module-drv"; > > - mem = <0x4b228000 0x38>, > > - <0x4b230000 0x60>, > > - <0x4b232400 0x90>; > > - mem-names = "uart", "ecap", "mdio"; > > - status = "okay"; > > - }; > > - uio_pruss1_evt0: uio_pruss1_evt0 { > > - compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>; > > - status = "okay"; > > - }; > > - uio_pruss1_evt1: uio_pruss1_evt1 { > > - compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>; > > - status = "okay"; > > - }; > > - uio_pruss1_evt2: uio_pruss1_evt2 { > > - compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>; > > - status = "okay"; > > - }; > > - uio_pruss1_evt3: uio_pruss1_evt3 { > > - compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; > > - status = "okay"; > > - }; > > - uio_pruss1_evt4: uio_pruss1_evt4 { > > - compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; > > - status = "okay"; > > - }; > > - uio_pruss1_evt5: uio_pruss1_evt5 { > > - compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; > > - status = "okay"; > > - }; > > - uio_pruss1_evt6: uio_pruss1_evt6 { > > - compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>; > > - status = "okay"; > > - }; > > - uio_pruss1_evt7: uio_pruss1_evt7 { > > - compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; > > - status = "okay"; > > - }; > > +&pruss_soc_bus1 { > > + uio_pruss1_mem: uio_pruss1_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x4b200000 0x2000>, > > + <0x4b202000 0x2000>, > > + <0x4b210000 0x8000>, > > + <0x4b220000 0x2000>, > > + <0x4b226000 0x2000>, > > + <0x4b22e000 0x31c>, > > + <0x4b232000 0x58>; > > + mem-names = "dram0", "dram1", "shrdram2", "intc", > > "cfg", > > + "iep", "mii_rt"; > > + status = "okay"; > > + }; > > + uio_pruss1_mem2: uio_pruss1_mem2 { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x4b228000 0x38>, > > + <0x4b230000 0x60>, > > + <0x4b232400 0x90>, > > + <0x40340000 0x40000>; > > + mem-names = "uart", "ecap", "mdio", "ocmc"; > > + status = "okay"; > > + }; > > + uio_pruss1_evt0: uio_pruss1_evt0 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt1: uio_pruss1_evt1 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt2: uio_pruss1_evt2 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt3: uio_pruss1_evt3 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt4: uio_pruss1_evt4 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt5: uio_pruss1_evt5 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt6: uio_pruss1_evt6 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt7: uio_pruss1_evt7 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > + status = "okay"; > > + }; > > > > - uio_pruss1_0_mem: uio_pruss1_0_mem { > > - compatible = "ti,uio-module-drv"; > > - mem = <0x4b234000 0x3000>, > > - <0x4b222000 0x400>, > > - <0x4b222400 0x100>; > > - mem-names = "iram", "control", "debug"; > > - status = "okay"; > > - }; > > + uio_pruss1_0_mem: uio_pruss1_0_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x4b234000 0x3000>, > > + <0x4b222000 0x400>, > > + <0x4b222400 0x100>; > > + mem-names = "iram", "control", "debug"; > > + status = "okay"; > > + }; > > > > - uio_pruss1_1_mem: uio_pruss1_1_mem { > > - compatible = "ti,uio-module-drv"; > > - mem = <0x4b238000 0x3000>, > > - <0x4b224000 0x400>, > > - <0x4b224400 0x100>; > > - mem-names = "iram", "control", "debug"; > > - status = "okay"; > > - }; > > + uio_pruss1_1_mem: uio_pruss1_1_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x4b238000 0x3000>, > > + <0x4b224000 0x400>, > > + <0x4b224400 0x100>; > > + mem-names = "iram", "control", "debug"; > > + status = "okay"; > > + }; > > +}; > > + > > +&pruss1 { > > + status = "disabled"; > > +}; > > + > > +&pru1_0 { > > + status = "disabled"; > > +}; > > + > > +&pru1_1 { > > + status = "disabled"; > > +}; > > + > > +&pruss1_intc { > > + status = "disabled"; > > +}; > > + > > +&pruss_soc_bus2 { > > + uio_pruss2_mdio: uio_pruss2_mdio { > > + compatible = "ti,davinci_mdio"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + clocks = <&dpll_gmac_h13x2_ck>; > > + clock-names = "fck"; > > + bus_freq = <1000000>; > > + reg = <0x4b2b2400 0x90>; > > + status = "disabled"; > > + }; > > > > uio_pruss2_mem: uio_pruss2_mem { > > compatible = "ti,uio-module-drv"; > > - ti,hwmods = "pruss2"; > > mem = <0x4b280000 0x2000>, > > <0x4b282000 0x2000>, > > <0x4b290000 0x8000>, > > @@ -102,48 +134,57 @@ > > compatible = "ti,uio-module-drv"; > > mem = <0x4b2a8000 0x38>, > > <0x4b2b0000 0x60>, > > - <0x4b2b2400 0x90>; > > - mem-names = "uart", "ecap", "mdio"; > > + <0x4b2b2400 0x90>, > > + <0x40300000 0x40000>; > > + mem-names = "uart", "ecap", "mdio", "ocmc"; > > status = "okay"; > > }; > > uio_pruss2_evt0: uio_pruss2_evt0 { > > compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; > > + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > status = "okay"; > > }; > > uio_pruss2_evt1: uio_pruss2_evt1 { > > compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; > > + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > status = "okay"; > > }; > > uio_pruss2_evt2: uio_pruss2_evt2 { > > compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>; > > + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > status = "okay"; > > }; > > uio_pruss2_evt3: uio_pruss2_evt3 { > > compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; > > + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > status = "okay"; > > }; > > uio_pruss2_evt4: uio_pruss2_evt4 { > > compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>; > > + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > status = "okay"; > > }; > > uio_pruss2_evt5: uio_pruss2_evt5 { > > compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>; > > + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > status = "okay"; > > }; > > uio_pruss2_evt6: uio_pruss2_evt6 { > > compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>; > > + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > status = "okay"; > > }; > > uio_pruss2_evt7: uio_pruss2_evt7 { > > compatible = "ti,uio-module-drv"; > > - interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; > > + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-mode = <1>; > > status = "okay"; > > }; > > > > @@ -163,23 +204,35 @@ > > mem-names = "iram", "control", "debug"; > > status = "okay"; > > }; > > - }; > > }; > > > > -&pruss1 { > > - status = "disabled"; > > +&uio_pruss2_mdio { > > + reset-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>, > > + <&gpio5 9 GPIO_ACTIVE_LOW>; > > + reset-delay-us = <2>; /* PHY datasheet states 1uS min */ > > }; > > > > -&pru1_0 { > > - status = "disabled"; > > +&uio_pruss2_mdio { > > + status = "okay"; > > + uio_pruss2_eth0_phy: uio_pruss2_eth0_phy@0 { > > + reg = <0>; > > + }; > > + > > + uio_pruss2_eth1_phy: uio_pruss2_eth1_phy@1 { > > + reg = <1>; > > + }; > > }; > > > > -&pru1_1 { > > - status = "disabled"; > > +&pruss2_emac0 { > > + status = "disabled"; > > +}; > > + > > +&pruss2_emac1 { > > + status = "disabled"; > > }; > > > > &pruss2 { > > - status = "disabled"; > > + status = "disabled"; > > }; > > > > &pru2_0 { > > @@ -190,6 +243,10 @@ > > status = "disabled"; > > }; > > > > +&pruss2_intc { > > + status = "disabled"; > > +}; > > + > > &pruss2_mdio { > > - status = "disabled"; > > + status = "disabled"; > > }; > > diff --git a/recipes-kernel/linux/files/k2g/keystone-k2g-pru-uio.dtsi > > b/recipes-kernel/linux/files/k2g/keystone-k2g-pru-uio.dtsi > > new file mode 100644 > > index 0000000..69955a4 > > --- /dev/null > > +++ b/recipes-kernel/linux/files/k2g/keystone-k2g-pru-uio.dtsi > > @@ -0,0 +1,391 @@ > > +&pruss_soc_bus0 { > > + uio_pruss1_mdio: uio_mdio@20ab2400 { > > + compatible = "ti,davinci_mdio"; > > + reg = <0x20ab2400 0x90>; > > + clocks = <&k2g_clks K2G_DEV_ICSS0 > > K2G_DEV_ICSS_CORE_CLK>; > > + clock-names = "fck"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + bus_freq = <2500000>; > > + status = "disabled"; > > + }; > > + > > + uio_pruss1_mem: uio_pruss1_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x20a80000 0x2000>, > > + <0x20a82000 0x2000>, > > + <0x20a90000 0x10000>, > > + <0x20aa0000 0x2000>, > > + <0x20aa6000 0x2000>, > > + <0x20aae000 0x31c>, > > + <0x20ab2000 0x70>; > > + mem-names = "dram0", "dram1", "shrdram2", "intc", > > "cfg", > > + "iep", "mii_rt"; > > + status = "okay"; > > + }; > > + uio_pruss1_mem2: uio_pruss1_mem2 { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x20aa8000 0x38>, > > + <0x20ab0000 0x60>, > > + <0x20ab2400 0x90>, > > + <0x0c080000 0xe000>; > > + mem-names = "uart", "ecap", "mdio", "ocmc"; > > + status = "okay"; > > + }; > > + uio_pruss1_evt0: uio_pruss1_evt0 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 224 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt1: uio_pruss1_evt1 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 225 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt2: uio_pruss1_evt2 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 226 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt3: uio_pruss1_evt3 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 227 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt4: uio_pruss1_evt4 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 228 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt6: uio_pruss1_evt6 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 230 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + uio_pruss1_evt7: uio_pruss1_evt7 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 231 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + > > + uio_pruss1_0_mem: uio_pruss1_0_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x20ab4000 0x3000>, > > + <0x20aa2000 0x400>, > > + <0x20aa2400 0x100>; > > + mem-names = "iram", "control", "debug"; > > + status = "okay"; > > + }; > > + > > + uio_pruss1_1_mem: uio_pruss1_1_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x20ab8000 0x3000>, > > + <0x20aa4000 0x400>, > > + <0x20aa4400 0x100>; > > + mem-names = "iram", "control", "debug"; > > + status = "okay"; > > + }; > > +}; > > + > > +&pruss_soc_bus1 { > > + uio_pruss2_mdio: uio_mdio@20af2400 { > > + compatible = "ti,davinci_mdio"; > > + reg = <0x20af2400 0x90>; > > + clocks = <&k2g_clks K2G_DEV_ICSS1 > > K2G_DEV_ICSS_CORE_CLK>; > > + clock-names = "fck"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + bus_freq = <2500000>; > > + status = "disabled"; > > + }; > > + > > + uio_pruss2_mem: uio_pruss2_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x20ac0000 0x2000>, > > + <0x20ac2000 0x2000>, > > + <0x20ad0000 0x10000>, > > + <0x20ae0000 0x2000>, > > + <0x20ae6000 0x2000>, > > + <0x20aee000 0x31c>, > > + <0x20af2000 0x70>; > > + mem-names = "dram0", "dram1", "shrdram2", "intc", > > "cfg", > > + "iep", "mii_rt"; > > + status = "okay"; > > + }; > > + uio_pruss2_mem2: uio_pruss2_mem2 { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x20ae8000 0x38>, > > + <0x20af0000 0x60>, > > + <0x20af2400 0x90>, > > + <0x0c08e000 0xe000>; > > + mem-names = "uart", "ecap", "mdio", "ocmc"; > > + status = "okay"; > > + }; > > + uio_pruss2_evt0: uio_pruss2_evt0 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 232 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt1: uio_pruss2_evt1 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 233 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt2: uio_pruss2_evt2 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 234 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt3: uio_pruss2_evt3 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 235 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt4: uio_pruss2_evt4 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 236 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt6: uio_pruss2_evt6 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 238 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + uio_pruss2_evt7: uio_pruss2_evt7 { > > + compatible = "ti,uio-module-drv"; > > + interrupts = <GIC_SPI 239 0xf01>; > > + interrupt-mode = <0>; > > + status = "okay"; > > + }; > > + > > + uio_pruss2_0_mem: uio_pruss2_0_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x20af4000 0x3000>, > > + <0x20ae2000 0x400>, > > + <0x20ae2400 0x100>; > > + mem-names = "iram", "control", "debug"; > > + status = "okay"; > > + }; > > + uio_pruss2_1_mem: uio_pruss2_1_mem { > > + compatible = "ti,uio-module-drv"; > > + mem = <0x20af8000 0x3000>, > > + <0x20ae4000 0x400>, > > + <0x20ae4400 0x100>; > > + mem-names = "iram", "control", "debug"; > > + status = "okay"; > > + }; > > +}; > > + > > +&k2g_pinctrl { > > + uio_pruss1_mdio_eth_default: uio_pruss1_mdio_eth_default { > > + pinctrl-single,pins = < > > + K2G_CORE_IOPAD(0x12cc) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE0) /* pr0_mdio_data.pr0_mdio_data */ > > + K2G_CORE_IOPAD(0x12d0) (BUFFER_CLASS_B | > > PIN_PULLDOWN | MUX_MODE0) /* pr0_mdio_mdclk.pr0_mdio_mdclk */ > > + K2G_CORE_IOPAD(0x105c) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE3) /* gpmc_wait1.gpio0_23 (pr0_mii0_resetn) */ > > + K2G_CORE_IOPAD(0x1070) (BUFFER_CLASS_B | > > PIN_PULLUP | > > MUX_MODE3) /* gpmc_csn2.gpio0_28 (pr0_mii0_intn) */ > > + K2G_CORE_IOPAD(0x1054) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE3) /* gpmc_be1n.gpio0_21 (pr0_mii1_resetn) */ > > + K2G_CORE_IOPAD(0x1074) (BUFFER_CLASS_B | > > PIN_PULLUP | > > MUX_MODE3) /* gpmc_csn3.gpio0_29 (pr0_mii1_intn) */ > > + > > + /* PRUSS0 External Mux routing */ > > + K2G_CORE_IOPAD(0x11d4) (BUFFER_CLASS_B | MUX_MODE3) > > /* uart0_ctsn.gpio0_106 */ > > + K2G_CORE_IOPAD(0x11d8) (BUFFER_CLASS_B | MUX_MODE3) > > /* uart0_rtsn.gpio0_107 */ > > + K2G_CORE_IOPAD(0x11fc) (BUFFER_CLASS_B | MUX_MODE3) > > /* dcan0_rx.gpio1_57 */ > > + K2G_CORE_IOPAD(0x1200) (BUFFER_CLASS_B | MUX_MODE3) > > /* dcan0_tx.gpio1_56 */ > > + K2G_CORE_IOPAD(0x1224) (BUFFER_CLASS_B | MUX_MODE3) > > /* qspi_csn2.gpio1_66 */ > > + K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | MUX_MODE3) > > /* qspi_csn3.gpio1_67 */ > > + > > + /* PRUSS0 PRU0 Ethernet */ > > + K2G_CORE_IOPAD(0x122c) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru0_gpo0.pr0_pru0_gpi0 (pr0_mii0_rxd0) */ > > + K2G_CORE_IOPAD(0x1230) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru0_gpo1.pr0_pru0_gpi1 (pr0_mii0_rxd1) */ > > + K2G_CORE_IOPAD(0x1234) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru0_gpo2.pr0_pru0_gpi2 (pr0_mii0_rxd2) */ > > + K2G_CORE_IOPAD(0x1238) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru0_gpo3.pr0_pru0_gpi3 (pr0_mii0_rxd3) */ > > + K2G_CORE_IOPAD(0x123c) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru0_gpo4.pr0_pru0_gpi4 (pr0_mii0_rxdv) */ > > + K2G_CORE_IOPAD(0x1240) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru0_gpo5.pr0_pru0_gpi5 (pr0_mii0_rxer) */ > > + K2G_CORE_IOPAD(0x1244) (BUFFER_CLASS_B | MUX_MODE1) > > /* pr0_pru0_gpo6.pr0_pru0_gpi6 (pr0_mii_mr0_clk) */ > > + > > + K2G_CORE_IOPAD(0x124c) (BUFFER_CLASS_B | MUX_MODE1) > > /* pr0_pru0_gpo8.pr0_pru0_gpi8 (pr0_mii0_rxlink) */ > > + K2G_CORE_IOPAD(0x1250) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru0_gpo9.pr0_pru0_gpi9 (pr0_mii0_col) */ > > + K2G_CORE_IOPAD(0x1254) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru0_gpo10.pr0_pru0_gpi10 (pr0_mii0_crs) */ > > + > > + K2G_CORE_IOPAD(0x12a8) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr0_pru1_gpo11.pr0_pru1_gpo11 (pr0_mii0_txd0) */ > > + K2G_CORE_IOPAD(0x12ac) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr0_pru1_gpo12.pr0_pru1_gpo12 (pr0_mii0_txd1) */ > > + K2G_CORE_IOPAD(0x12b0) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr0_pru1_gpo13.pr0_pru1_gpo13 (pr0_mii0_txd2) */ > > + K2G_CORE_IOPAD(0x12b4) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr0_pru1_gpo14.pr0_pru1_gpo14 (pr0_mii0_txd3) */ > > + K2G_CORE_IOPAD(0x12b8) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr0_pru1_gpo15.pr0_pru1_gpo15 (pr0_mii0_txen) */ > > + K2G_CORE_IOPAD(0x12bc) (BUFFER_CLASS_B | MUX_MODE1) > > /* pr0_pru1_gpo16.pr0_pru1_gpo16 (pr0_mii_mt0_clk) */ > > + > > + /* PRUSS0 PRU1 Ethernet */ > > + K2G_CORE_IOPAD(0x127c) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru1_gpo0.pr0_pru1_gpi0 (pr0_mii1_rxd0) */ > > + K2G_CORE_IOPAD(0x1280) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru1_gpo1.pr0_pru1_gpi1 (pr0_mii1_rxd1) */ > > + K2G_CORE_IOPAD(0x1284) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru1_gpo2.pr0_pru1_gpi2 (pr0_mii1_rxd2) */ > > + K2G_CORE_IOPAD(0x1288) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru1_gpo3.pr0_pru1_gpi3 (pr0_mii1_rxd3) */ > > + K2G_CORE_IOPAD(0x128c) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru1_gpo4.pr0_pru1_gpi4 (pr0_mii1_rxdv) */ > > + K2G_CORE_IOPAD(0x1290) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru1_gpo5.pr0_pru1_gpi5 (pr0_mii1_rxer) */ > > + K2G_CORE_IOPAD(0x1294) (BUFFER_CLASS_B | MUX_MODE1) > > /* pr0_pru1_gpo6.pr0_pru1_gpi6 (pr0_mii_mr1_clk) */ > > + > > + K2G_CORE_IOPAD(0x129c) (BUFFER_CLASS_B | MUX_MODE1) > > /* pr0_pru1_gpo8.pr0_pru1_gpi8 (pr0_mii1_rxlink) */ > > + K2G_CORE_IOPAD(0x12a0) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru1_gpo9.pr0_pru1_gpi9 (pr0_mii1_col) */ > > + K2G_CORE_IOPAD(0x12a4) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr0_pru1_gpo10.pr0_pru1_gpi10 (pr0_mii1_crs) */ > > + > > + K2G_CORE_IOPAD(0x1258) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr0_pru0_gpo11.pr0_pru0_gpo11 (pr0_mii1_txd0) */ > > + K2G_CORE_IOPAD(0x125c) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr0_pru0_gpo12.pr0_pru0_gpo12 (pr0_mii1_txd1) */ > > + K2G_CORE_IOPAD(0x1260) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr0_pru0_gpo13.pr0_pru0_gpo13 (pr0_mii1_txd2) */ > > + K2G_CORE_IOPAD(0x1264) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr0_pru0_gpo14.pr0_pru0_gpo14 (pr0_mii1_txd3) */ > > + K2G_CORE_IOPAD(0x1268) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr0_pru0_gpo15.pr0_pru0_gpo15 (pr0_mii1_txen) */ > > + K2G_CORE_IOPAD(0x126c) (BUFFER_CLASS_B | MUX_MODE1) > > /* pr0_pru0_gpo16.pr0_pru0_gpo16 (pr0_mii_mt1_clk) */ > > + >; > > + }; > > + > > + uio_pruss2_mdio_eth_default: uio_pruss2_mdio_eth_default { > > + pinctrl-single,pins = < > > + K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE0) /* pr1_mdio_data.pr1_mdio_data */ > > + K2G_CORE_IOPAD(0x1378) (BUFFER_CLASS_B | > > PIN_PULLDOWN | MUX_MODE0) /* pr1_mdio_mdclk.pr1_mdio_mdclk */ > > + K2G_CORE_IOPAD(0x1050) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE3) /* gpmc_be0ncle.gpio0_20 (pr1_mii0_resetn) */ > > + K2G_CORE_IOPAD(0x1044) (BUFFER_CLASS_B | > > PIN_PULLUP | > > MUX_MODE3) /* gpmc_advnale.gpio0_17 (pr1_mii0_intn) */ > > + K2G_CORE_IOPAD(0x1060) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE3) /* gpmc_wpn.gpio0_24 (pr1_mii1_resetn) */ > > + K2G_CORE_IOPAD(0x1088) (BUFFER_CLASS_B | > > PIN_PULLUP | > > MUX_MODE3) /* gpmc_wait0.gpio0_22 (pr1_mii1_intn) */ > > + > > + /* PRUSS1 PRU0 Ethernet */ > > + K2G_CORE_IOPAD(0x12d4) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru0_gpo0.pr1_pru0_gpi0 (pr1_mii0_rxd0) */ > > + K2G_CORE_IOPAD(0x12d8) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru0_gpo1.pr1_pru0_gpi1 (pr1_mii0_rxd1) */ > > + K2G_CORE_IOPAD(0x12dc) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru0_gpo2.pr1_pru0_gpi2 (pr1_mii0_rxd2) */ > > + K2G_CORE_IOPAD(0x12e0) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru0_gpo3.pr1_pru0_gpi3 (pr1_mii0_rxd3) */ > > + K2G_CORE_IOPAD(0x12e4) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru0_gpo4.pr1_pru0_gpi4 (pr1_mii0_rxdv) */ > > + K2G_CORE_IOPAD(0x12e8) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru0_gpo5.pr1_pru0_gpi5 (pr1_mii0_rxer) */ > > + K2G_CORE_IOPAD(0x12ec) (BUFFER_CLASS_B | MUX_MODE1) > > /* pr1_pru0_gpo6.pr1_pru0_gpi6 (pr1_mii_mr0_clk) */ > > + > > + K2G_CORE_IOPAD(0x12f4) (BUFFER_CLASS_B | MUX_MODE1) > > /* pr1_pru0_gpo8.pr1_pru0_gpi8 (pr1_mii0_rxlink) */ > > + K2G_CORE_IOPAD(0x12f8) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru0_gpo9.pr1_pru0_gpi9 (pr1_mii0_col) */ > > + K2G_CORE_IOPAD(0x12fc) (BUFFER_CLASS_B | > > PULL_DISABLE | > > MUX_MODE1) /* pr1_pru0_gpo10.pr1_pru0_gpi10 (pr1_mii0_crs) */ > > + > > + K2G_CORE_IOPAD(0x1350) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr1_pru1_gpo11.pr1_pru1_gpo11 (pr1_mii0_txd0) */ > > + K2G_CORE_IOPAD(0x1354) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr1_pru1_gpo12.pr1_pru1_gpo12 (pr1_mii0_txd1) */ > > + K2G_CORE_IOPAD(0x1358) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr1_pru1_gpo13.pr1_pru1_gpo13 (pr1_mii0_txd2) */ > > + K2G_CORE_IOPAD(0x135c) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr1_pru1_gpo14.pr1_pru1_gpo14 (pr1_mii0_txd3) */ > > + K2G_CORE_IOPAD(0x1360) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr1_pru1_gpo15.pr1_pru1_gpo15 (pr1_mii0_txen) */ > > + K2G_CORE_IOPAD(0x1364) (BUFFER_CLASS_B | MUX_MODE1) > > /* pr1_pru1_gpo16.pr1_pru1_gpo16 (pr1_mii_mt0_clk) */ > > + > > + /* PRUSS1 PRU1 Ethernet */ > > + K2G_CORE_IOPAD(0x1324) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru1_gpo0.pr1_pru1_gpi0 (pr1_mii1_rxd0) */ > > + K2G_CORE_IOPAD(0x132c) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru1_gpo2.pr1_pru1_gpi2 (pr1_mii1_rxd2) */ > > + K2G_CORE_IOPAD(0x1330) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru1_gpo3.pr1_pru1_gpi3 (pr1_mii1_rxd3) */ > > + K2G_CORE_IOPAD(0x1334) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru1_gpo4.pr1_pru1_gpi4 (pr1_mii1_rxdv) */ > > + K2G_CORE_IOPAD(0x1338) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru1_gpo5.pr1_pru1_gpi5 (pr1_mii1_rxer) */ > > + K2G_CORE_IOPAD(0x133c) (BUFFER_CLASS_B | MUX_MODE1) > > /* pr1_pru1_gpo6.pr1_pru1_gpi6 (pr1_mii_mr1_clk) */ > > + > > + K2G_CORE_IOPAD(0x1344) (BUFFER_CLASS_B | MUX_MODE1) > > /* pr1_pru1_gpo8.pr1_pru1_gpi8 (pr1_mii1_rxlink) */ > > + K2G_CORE_IOPAD(0x1348) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru1_gpo9.pr1_pru1_gpi9 (pr1_mii1_col) */ > > + K2G_CORE_IOPAD(0x134c) (BUFFER_CLASS_B | > > PULL_DISABLE > > | MUX_MODE1) /* pr1_pru1_gpo10.pr1_pru1_gpi10 (pr1_mii1_crs) */ > > + > > + K2G_CORE_IOPAD(0x1300) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr1_pru0_gpo11.pr1_pru0_gpo11 (pr1_mii1_txd0) */ > > + K2G_CORE_IOPAD(0x1304) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr1_pru0_gpo12.pr1_pru0_gpo12 (pr1_mii1_txd1) */ > > + K2G_CORE_IOPAD(0x1308) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr1_pru0_gpo13.pr1_pru0_gpo13 (pr1_mii1_txd2) */ > > + K2G_CORE_IOPAD(0x130c) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr1_pru0_gpo14.pr1_pru0_gpo14 (pr1_mii1_txd3) */ > > + K2G_CORE_IOPAD(0x1310) (BUFFER_CLASS_B | MUX_MODE0) > > /* pr1_pru0_gpo15.pr1_pru0_gpo15 (pr1_mii1_txen) */ > > + K2G_CORE_IOPAD(0x1314) (BUFFER_CLASS_B | MUX_MODE1) > > /* pr1_pru0_gpo16.pr1_pru0_gpo16 (pr1_mii_mt1_clk) */ > > + >; > > + }; > > +}; > > + > > +&uio_pruss1_mdio { > > + status = "okay"; > > + pinctrl-0 = <&uio_pruss1_mdio_eth_default>; > > + pinctrl-names = "default"; > > + reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>, > > + <&gpio0 21 GPIO_ACTIVE_LOW>; > > + reset-delay-us = <20>; > > + > > + uio_pruss1_eth0_phy: uio-ethernet-phy@0 { > > + reg = <0>; > > + }; > > + > > + uio_pruss1_eth1_phy: uio-ethernet-phy@1 { > > + reg = <1>; > > + }; > > +}; > > + > > +&uio_pruss2_mdio { > > + status = "okay"; > > + pinctrl-0 = <&uio_pruss2_mdio_eth_default>; > > + pinctrl-names = "default"; > > + reset-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>, > > + <&gpio0 24 GPIO_ACTIVE_LOW>; > > + reset-delay-us = <20>; > > + > > + uio_pruss2_eth0_phy: uio-ethernet-phy@2 { > > + reg = <2>; > > + }; > > + > > + uio_pruss2_eth1_phy: uio-ethernet-phy@3 { > > + reg = <3>; > > + }; > > +}; > > + > > +&pruss0 { > > + status = "disabled"; > > +}; > > + > > +&pru0_0 { > > + status = "disabled"; > > +}; > > + > > +&pru0_1 { > > + status = "disabled"; > > +}; > > + > > +&pruss0_intc { > > + status = "disabled"; > > +}; > > + > > +&pruss0_mdio { > > + status = "disabled"; > > +}; > > + > > +&pruss1 { > > + status = "disabled"; > > +}; > > + > > +&pru1_0 { > > + status = "disabled"; > > +}; > > + > > +&pru1_1 { > > + status = "disabled"; > > +}; > > + > > +&pruss1_intc { > > + status = "disabled"; > > +}; > > + > > +&pruss1_mdio { > > + status = "disabled"; > > +}; > > + > > +&pruss0_emac0 { > > + status = "disabled"; > > +}; > > + > > +&pruss0_emac1 { > > + status = "disabled"; > > +}; > > + > > +&pruss1_emac0 { > > + status = "disabled"; > > +}; > > + > > +&pruss1_emac1 { > > + status = "disabled"; > > +}; > > diff --git a/recipes-kernel/linux/ti-uio.inc > > b/recipes-kernel/linux/ti-uio.inc > > index 5c43637..13cf53e 100644 > > --- a/recipes-kernel/linux/ti-uio.inc > > +++ b/recipes-kernel/linux/ti-uio.inc > > @@ -2,7 +2,10 @@ SRC_URI_append_keystone = " file://keystone-uio.dtsi" > > SRC_URI_append_k2hk = " file://k2hk-uio.dtsi" > > SRC_URI_append_k2l-evm = " file://k2l-uio.dtsi" > > SRC_URI_append_k2e = " file://k2e-uio.dtsi" > > -SRC_URI_append_am57xx-evm = " file://am572x-pru-uio.dtsi" > > +SRC_URI_append_k2g = " file://keystone-k2g-pru-uio.dtsi" > > +SRC_URI_append_am57xx-evm = " file://am572x-pru-uio.dtsi \ > > + file://am571x-pru-uio.dtsi \ " > > SRC_URI_append_ti33x = " file://am335x-pru-uio.dtsi" > > SRC_URI_append_ti43x = " file://am437x-pru-uio.dtsi" > > > > @@ -12,9 +15,10 @@ DTSI_LIST_append_k2hk = " k2hk-uio.dtsi" > > DTSI_LIST_append_k2l-evm = " k2l-uio.dtsi" > > DTSI_LIST_append_k2e = " k2e-uio.dtsi" > > > > -KERNEL_DEVICETREE_append_am57xx-evm = > > "${@base_conditional("ENABLE_TI_UIO_DEVICES", "1", " am572x-idk-pru- > > excl-uio.dtb", "", d)}" > > +KERNEL_DEVICETREE_append_am57xx-evm = > > "${@base_conditional("ENABLE_TI_UIO_DEVICES", "1", " am572x-idk-pru- > > excl-uio.dtb am571x-idk-pru-excl-uio.dtb", "", d)}" > > KERNEL_DEVICETREE_append_ti33x = > > "${@base_conditional("ENABLE_TI_UIO_DEVICES", "1", " am335x-icev2-pru- > > excl-uio.dtb", "", d)}" > > KERNEL_DEVICETREE_append_ti43x = > > "${@base_conditional("ENABLE_TI_UIO_DEVICES", "1", " am437x-idk-pru- > > excl-uio.dtb", "", d)}" > > +KERNEL_DEVICETREE_append_k2g = > > "${@base_conditional("ENABLE_TI_UIO_DEVICES", "1", " keystone-k2g-ice- > > pru-excl-uio.dtb", "", d)}" > > > > do_setup_uio() { > > if [ "${ENABLE_TI_UIO_DEVICES}" == "1" ] @@ -40,6 +44,12 @@ > > do_setup_uio_append_am57xx-evm() { > > cp ${S}/arch/arm/boot/dts/am572x-idk.dts > > ${S}/arch/arm/boot/dts/$dts > > cp ${WORKDIR}/${dtsi} ${S}/arch/arm/boot/dts/ > > echo "#include \"${dtsi}\"" >> ${S}/arch/arm/boot/dts/$dts > > + > > + dts="am571x-idk-pru-excl-uio.dts" > > + dtsi="am571x-pru-uio.dtsi" > > + cp ${S}/arch/arm/boot/dts/am571x-idk.dts > > ${S}/arch/arm/boot/dts/$dts > > + cp ${WORKDIR}/${dtsi} ${S}/arch/arm/boot/dts/ > > + echo "#include \"${dtsi}\"" >> ${S}/arch/arm/boot/dts/$dts > > fi > > } > > > > @@ -67,4 +77,16 @@ do_setup_uio_append_ti43x() { > > fi > > } > > > > +do_setup_uio_append_k2g() { > > + > > + if [ "${ENABLE_TI_UIO_DEVICES}" == "1" ] > > + then > > + dts="keystone-k2g-ice-pru-excl-uio.dts" > > + dtsi="keystone-k2g-pru-uio.dtsi" > > + cp ${S}/arch/arm/boot/dts/keystone-k2g-ice.dts > > ${S}/arch/arm/boot/dts/$dts > > + cp ${WORKDIR}/${dtsi} ${S}/arch/arm/boot/dts/ > > + echo "#include \"${dtsi}\"" >> ${S}/arch/arm/boot/dts/$dts > > + fi > > +} > > + > > do_patch[postfuncs] += "do_setup_uio" > > -- > > 1.9.1 > > -- > _______________________________________________ > meta-ti mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-ti -- _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
