On Wed, Oct 17, 2018 at 03:46:23PM -0400, Denys Dmytriyenko wrote: > On Wed, Oct 17, 2018 at 12:28:52PM -0700, Khem Raj wrote: > > Use variables from upstream u-boot, makes it easy to switch to > > mainline u-boot from oe-core if someone wants to > > Actually, those vars are not unique to upstream u-boot: > http://arago-project.org/git/?p=meta-ti.git;a=blob;f=recipes-bsp/u-boot/u-boot-ti.inc;hb=HEAD
Sorry, had own mirror handy at the moment. :) Here's official link on YP git: http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/tree/recipes-bsp/u-boot/u-boot-ti.inc > Lines #13 and #54. > > > > Signed-off-by: Khem Raj <[email protected]> > > --- > > conf/machine/beaglebone.conf | 12 +++++++++--- > > 1 file changed, 9 insertions(+), 3 deletions(-) > > > > diff --git a/conf/machine/beaglebone.conf b/conf/machine/beaglebone.conf > > index 25147926..9b656d01 100644 > > --- a/conf/machine/beaglebone.conf > > +++ b/conf/machine/beaglebone.conf > > @@ -1,6 +1,6 @@ > > #@TYPE: Machine > > #@NAME: BeagleBone machine > > -#@DESCRIPTION: Machine configuration for the http://beagleboard.org/bone > > board > > +#@DESCRIPTION: Machine configuration for the http://beagleboard.org/bone > > board > > > > require conf/machine/include/ti33x.inc > > > > @@ -17,10 +17,16 @@ SERIAL_CONSOLE = "115200 ttyS0" > > #UBOOT_MACHINE = "am335x_boneblack_config" > > > > WKS_FILE = "sdimage-bootpart.wks" > > -IMAGE_BOOT_FILES = "MLO u-boot.img" > > -IMAGE_FSTYPES += "tar.xz wic.xz" > > > > do_image_wic[depends] += "mtools-native:do_populate_sysroot > > dosfstools-native:do_populate_sysroot" > > +IMAGE_BOOT_FILES ?= "u-boot.${UBOOT_SUFFIX} MLO" > > + > > +IMAGE_FSTYPES += "tar.xz wic.xz" > > > > # Refine the list of device targets for ti-pdk class recipes > > TI_PDK_LIMIT_BOARDS = "bbbAM335x" > > + > > +SPL_BINARY = "MLO" > > +UBOOT_SUFFIX = "img" > > Well, I see your point defining these 2 vars here, but then you don't use MLO > above for IMAGE_BOOT_FILES... > > Also, it would make sense to start moving those vars into machine configs for > other machines. And make them conditional in u-boot recipe... > > > > +IMAGE_INSTALL_append = " kernel-devicetree kernel-image-zimage" > > -- > > 2.19.1 > > > > -- > > _______________________________________________ > > meta-ti mailing list > > [email protected] > > https://lists.yoctoproject.org/listinfo/meta-ti > -- > _______________________________________________ > meta-ti mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-ti -- _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
