On 8/8/2023 12:01 PM, Bruce Ashfield wrote:
On Tue, Aug 8, 2023 at 1:48 PM Gundlupet Raju, Sandeep
<[email protected]> wrote:
Hi Bruce, Chris,
Thanks for considering this.
On 8/1/2023 12:33 PM, Bruce Ashfield wrote:
On Mon, Jul 31, 2023 at 2:20 PM Christopher Clark
<[email protected]> wrote:
On Fri, Jul 28, 2023 at 5:52 AM Bruce Ashfield <[email protected]> wrote:
I'm travelling today, so I can't formulate a full answer at the moment.
I just wanted to let everyone know that I have been reading and do
have an opinion which I'll send out when I get a chance to properly
write an email.
I hadn't seen the patches in great detail before this send, so I need
to go through things and have a closer look.
Generally speaking, I support having related recipes in a layer, as a
full reference stack. Perhaps there's a subset of things that are too
hardware/board specific, but again, I haven't looked in detail yet.
Layer "expansion" is also an issue for maintenance in the overall
ecosystem. Having too many layers is an issue for maintenance, along
with having too few layers that don't have a clean split between
distro/machine and functionality.
Even if some of this does land in a non-xilinx specific layer (that
isn't meta-virt), we'd be well served to have a README or other file
in meta-virt that explains how to build for hardware platforms. Having
only qemu available in meta-virt, and then having integrators wander
off into the wild world of non peer reviewed vendor layers and forks
of various components is something that I've been concerned about for
quite some time.
Thanks for replying -- the challenges of dealing with layer proliferation are
real, which is part of what motivated the introduction of the dynamic layer for
the Raspberry Pi board in support of enabling simpler testing, and I hadn't
given that enough consideration in my response earlier. Without a reference
document or direct example, it's not easy - it takes practical experience and
persistence with it at the moment, so thanks for doing that work, Sandeep, and
I apologise. The dynamic layers are good for enabling compatibility with
composition and these changes are in support of a positive experience with
enabling Xen platforms, so please continue.
I'm finally back at a keyboard after 20+ hours of driving in the past 4 days.
I won't dig in much more to the patches, but I wanted to be clear that
I wasn't criticizing your comment in the slightest. We need that sort
of review.
If we do find something that is inappropriate that I miss in the
patches, please flag it and I'll remove it and ask for it to go to a
BSP layer.
[Sandeep]: Bruce any updates on patch review? Mark Hatle had a minor one
on commit message. I was thinking to send a v2 patch once Bruce has
finished his review.
I didn't see anything that was a red-flag to remove, so I've merged it
as-is to master.
If anything causes issues, we'll revisit and do incremental updates.
Thanks Bruce!
Bruce
Cheers,
Bruce
best,
Christopher
That all being said, don't take any of the above as more than my
initial thoughts. I'm extremely pleased to see Christophers review and
questions .. that's exactly what we need!
Bruce
On Fri, Jul 28, 2023 at 2:06 AM Christopher Clark
<[email protected]> wrote:
+CC Bertrand
On Thu, Jul 27, 2023 at 5:38 PM Sandeep Gundlupet Raju via lists.yoctoproject.org
<[email protected]> wrote:
Hi Chris,
On 7/27/2023 6:10 PM, Christopher Clark via lists.yoctoproject.org wrote:
On Thu, Jul 27, 2023 at 4:22 PM Sandeep Gundlupet Raju
<[email protected]> wrote:
Add Xen dt and u-boot script support for AMD ZynqMP and Versal devices.
Hi Sandeep - this is a slightly surprising submission. I'm unsure about
meta-virtualization being the right place for this as typically hardware
enablement is more appropriately done in a BSP layer, where engineers who have
knowledge about and access to specific hardware can collaborate on maintaining
the machine-specific aspects of recipes.
[Sandeep]: I checked with Bruce before I submit the patches, Since we had
xilinx dynamic layer, he has no objection in accepting the patches.
That is generous, but I think you could make the layer maintenance
responsibilities easier and help with establishing good practice for hardware
support if these changes can go into a BSP layer instead, if that is an option?
I do appreciate that you are working on enabling Xen to work on additional
platforms.
The Xilinx dynamic layer could be removed from meta-virtualization by adding
its Xen image creation logic to the primary Xen hypervisor recipe -- possibly
with a new mkimage task? -- to be enabled via new settings in an Arm or Xilinx
MACHINE configuration.
Xen in this (non-BSP) layer has support for qemu MACHINES, plus generic x86-64
and the Raspberry Pi 4 board for Arm platform coverage; the latter is a
special-case that has been discussed by Xen and Yocto community members as a
basic commodity reference hardware platform for testing (and using) Xen, and
the community for this layer has more of the interested parties participating
in it than meta-raspberrypi does.
Are you experiencing difficulties with maintaining your Xen recipe components
in a separate layer?
[Sandeep]: No we are not experiencing any difficulties in maintaining these
files, currently all the dtsi files are in meta-petalinux layer and if users
are using without meta-petalinux distro layer(building xen-image-minimal), then
Xen doesn't work on ZynqMP and Versal devices.
Do you know which layer defines the MACHINE configurations for those hardware
devices? It seems like that could be a suitable BSP layer for these changes?
Mark Hatle and myself we discussed on this and we saw rpi u-boot script and
other files in this layer, we thought this is a good place to move these files.
I see how the raspberry pi dynamic layer can give that impression which is
unfortunate. The motivation for the inclusion of the rpi files in
meta-virtualization is to enable collaboration on hardware testing (and
reproduction and diagnosis if needed) of the Arm architecture functionality of
the primary Xen recipes, on a low-cost commodity hardware board, with agreement
on this from Xen stakeholders at multiple different organizations. X86 doesn't
need it as generic x86-64 support (see meta-yocto-bsp) is enough.
Christopher
Mark can chime in here to add any additional comments.
Christopher
User can enable xen u-boot script by adding below variable from
configuration file as shown below.
BOOTMODE = "xen"
This u-boot script also supports to configure below Xen params from
configuration file.
params variable assignment
------ -------------------
duart XEN_SERIAL_CONSOLES = "serial0"
dom0_mem DOM0_MEM = "1500M"
dom0_max_vcpus DOM0_MAX_VCPUS = "1"
extra params XEN_CMDLINE_APPEND = "loglvl=all"
Sandeep Gundlupet Raju (2):
recipes-bsp: Add device-tree files for Xen support
recipes-bsp: Add u-boot-xlnx scripts for Xen support
.../device-tree/device-tree.bbappend | 19 +++
.../files/versal-net-xen-qemu.dtsi | 2 +
.../device-tree/files/versal-net-xen.dtsi | 67 ++++++++++
.../device-tree/files/versal-xen-qemu.dtsi | 2 +
.../device-tree/files/versal-xen.dtsi | 59 +++++++++
.../device-tree/files/zynqmp-xen-qemu.dtsi | 16 +++
.../device-tree/files/zynqmp-xen.dtsi | 123 ++++++++++++++++++
.../u-boot/u-boot-xlnx-scr.bbappend | 2 +
.../u-boot/u-boot-xlnx-scr/boot.cmd.xen | 80 ++++++++++++
.../recipes-bsp/u-boot/xen-boot-cmd.inc | 38 ++++++
10 files changed, 408 insertions(+)
create mode 100644
dynamic-layers/xilinx/recipes-bsp/device-tree/device-tree.bbappend
create mode 100644
dynamic-layers/xilinx/recipes-bsp/device-tree/files/versal-net-xen-qemu.dtsi
create mode 100644
dynamic-layers/xilinx/recipes-bsp/device-tree/files/versal-net-xen.dtsi
create mode 100644
dynamic-layers/xilinx/recipes-bsp/device-tree/files/versal-xen-qemu.dtsi
create mode 100644
dynamic-layers/xilinx/recipes-bsp/device-tree/files/versal-xen.dtsi
create mode 100644
dynamic-layers/xilinx/recipes-bsp/device-tree/files/zynqmp-xen-qemu.dtsi
create mode 100644
dynamic-layers/xilinx/recipes-bsp/device-tree/files/zynqmp-xen.dtsi
create mode 100644
dynamic-layers/xilinx/recipes-bsp/u-boot/u-boot-xlnx-scr.bbappend
create mode 100644
dynamic-layers/xilinx/recipes-bsp/u-boot/u-boot-xlnx-scr/boot.cmd.xen
create mode 100644 dynamic-layers/xilinx/recipes-bsp/u-boot/xen-boot-cmd.inc
--
2.34.1
--
- Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end
- "Use the force Harry" - Gandalf, Star Trek II
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#8172):
https://lists.yoctoproject.org/g/meta-virtualization/message/8172
Mute This Topic: https://lists.yoctoproject.org/mt/100401326/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-virtualization/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
