Since u-boot-xlnx-scr is shared between xen and non-xen builds, Kernel and Devicetree image offset address from dynamic layer will be used during variable pre expansion which causes boot issues on HW. Hence enable xen boot script using variable.
Testing: Add below variables to local.conf file to enable xen builds. BOOTMODE = "xen" ENABLE_XEN_UBOOT_SCR = "1" ENABLE_XEN_DTSI = "1" ENABLE_XEN_QEMU_DTSI = "1" Sandeep Gundlupet Raju (2): xen-boot-cmd: Add xen variable as addendum u-boot-xlnx-scr: Enable xen boot script using variable .../recipes-bsp/u-boot/u-boot-xlnx-scr.bbappend | 6 ++++-- .../xilinx/recipes-bsp/u-boot/xen-boot-cmd.inc | 12 ++++++++++++ 2 files changed, 16 insertions(+), 2 deletions(-) -- 2.34.1
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#8234): https://lists.yoctoproject.org/g/meta-virtualization/message/8234 Mute This Topic: https://lists.yoctoproject.org/mt/100961343/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-virtualization/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
