OK, I use a manually created boot.scr and ahve my board booting. The question is, how do we add custom boot.scr, in my case to enable using the SD card as a root file system, to meta-xilinx. I'd like to avoid being forced to create my own layer just to use wic and a custom boot.scr to run the zedboard entirely from an SD card.
Do we add more variables, settable from local.conf/distro.conf, to control how boot.scr is created? Philip On 1/3/20 10:28 AM, Philip Balister wrote: > OK, after a few trips in circles and false starts, I think I am at the > question: > > How do I configure u-boot-zynq-zcr.bb to create a boot script without a > ramdisk. Basically, I need to give the bootm the kernel and devicetree > addresses and a - for the ramdisk. > > Philip > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#4617): https://lists.yoctoproject.org/g/meta-xilinx/message/4617 Mute This Topic: https://lists.yoctoproject.org/mt/69400222/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-xilinx/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
