Hi, I used poky latest + meta-xilinx/meta-xilinx-bsp (with a patch that adds hardknott to the layer.conf) for zedboard-zynq7
This actually builds core-image-minimal. Due to the lack of a wks file I tried to manually prepare the SD card and copy the files, but I see nothing on the serial console. That's what I did: https://pastebin.com/E7x1uuM9 Now I power on the board and do this: screen /dev/ttyUSB_zynq-zed 115200 And I see nothing on the serial console. Also when I press the reset button I see nothing. Am I doing something obviously wrong? If I plug in another SD card, where I have some ancient, hacked upstream u-boot I get output on the serial console (meaning my setup works): https://pastebin.com/5een9Pmr Please advise (and ideally point to me to a wks file). Regards, Robert
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#4893): https://lists.yoctoproject.org/g/meta-xilinx/message/4893 Mute This Topic: https://lists.yoctoproject.org/mt/82715602/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-xilinx/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
