Hi - I was hoping to include fpgautil in my OS for a custom board/firmware, and using a zynq. I followed these instructions <https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841847/Solution+ZynqMP+PL+Programming#SolutionZynqMPPLProgramming-References> using rel-v2020.2 of all the layers and was able to build, but the OS freezes immediately, or after a few seconds, without even using the fpgautil.
Any thoughts on what may be doing this? I'm also using external-hdf to build for the custom board requirements. The XSA I'm including isn't too crazy, but does include a GPIO in the PL that the OS accesses regularly for temperature monitoring purposes. Could this be causing issues? Is there a workaround? Additionally, it would be much nicer to be able to add the line indicated in the instructions: `EXTRA_IMAGE_FEATURES += " fpga-manager"` to the image definition since that's in my custom layer, instead of the build conf file. But when I do this, I get QA errors about /lib/firmware/base not being packaged. I've tried using IMAGE_FEATURES with similar results. If anyone has any thoughts there as well, I'd appreciate it. Best, Emily
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#4975): https://lists.yoctoproject.org/g/meta-xilinx/message/4975 Mute This Topic: https://lists.yoctoproject.org/mt/90296178/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-xilinx/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
