Hi together,
Yocto build (rel-v2022.2) fails with custom xsa file.
This is basically my local.conf
# xilinx
LICENSE_FLAGS_WHITELIST = "xilinx"
HDF_MACHINE = "my-bsp"
HDF_BASE = "file://"
HDF_PATH =
"/home/builder/Workspaces/vivado/sfp_8b10b/project/design_2_wrapper.xsa"
BBMULTICONFIG ?= "zynqmp-pmufw"
do_image[mcdepends] = "multiconfig::zynqmp-pmufw:pmu-firmware:do_deploy"
XILINX_VER_MAIN = "2022.2"
YAML_SERIAL_CONSOLE_STDIN:zynqmp-generic:pn-fsbl-firmware = "psu_uart_0"
YAML_SERIAL_CONSOLE_STDOUT:zynqmp-generic:pn-fsbl-firmware = "psu_uart_0"
YAML_SERIAL_CONSOLE_STDIN:zynqmp-generic:pn-pmu-firmware = "psu_uart_1"
YAML_SERIAL_CONSOLE_STDOUT:zynqmp-generic:pn-pmu-firmware = "psu_uart_1"
MACHINE ??= "zcu102-zynqmp"
DISTRO ??= "poky"
BBMULTICONFIG ?= ""
I get a strange error message, here's the log:
DEBUG: Executing python function extend_recipe_sysroot
NOTE: Direct dependencies are
['virtual:native:/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/../poky/meta/recipes-devtools/python/python3-pyyaml_5.4.1.bb:do_populate_sysroot',
'virtual:native:/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/../poky/meta/recipes-devtools/patch/patch_2.7.6.bb:do_populate_sysroot',
'/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/../poky/meta/recipes-devtools/quilt/quilt-native_0.66.bb:do_populate_sysroot',
'virtual:native:/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/../poky/meta/recipes-devtools/python/python3_3.9.9.bb:do_populate_sysroot',
'virtual:native:/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/../poky/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot']
NOTE: Installed into sysroot: []
NOTE: Skipping as already exists in sysroot: ['python3-pyyaml-native',
'patch-native', 'quilt-native', 'python3-native', 'pseudo-native',
'libffi-native', 'pkgconfig-native', 'util-linux-native', 'libtool-native',
'automake-native', 'zlib-native', 'sqlite3-native', 'libtirpc-native',
'openssl-native', 'readline-native', 'libnsl2-native', 'autoconf-native',
'xz-native', 'bzip2-native', 'gdbm-native', 'attr-native',
'python3-setuptools-native', 'python3-cython-native', 'libyaml-native',
'texinfo-dummy-native', 'libpcre2-native', 'util-linux-libuuid-native',
'ncurses-native', 'libcap-ng-native', 'gettext-minimal-native', 'm4-native',
'gnu-config-native']
DEBUG: Python function extend_recipe_sysroot finished
DEBUG: Executing shell function do_configure
MISC_ARG is -yamlconf
/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/tmp/work/zcu102_zynqmp-poky-linux/fsbl-firmware/2022.2+gitAUTOINC+5330a64c8e-r0/fsbl-firmware.yaml
APP_ARG is -app "Zynq MP FSBL"
Using xsct from:
/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/xsct/Vitis/2022.2/bin/xsct
cmd is: xsct -sdx -nodisp
/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/tmp/work/zcu102_zynqmp-poky-linux/fsbl-firmware/2022.2+gitAUTOINC+5330a64c8e-r0/app.tcl
-ws
/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/tmp/work/zcu102_zynqmp-poky-linux/fsbl-firmware/2022.2+gitAUTOINC+5330a64c8e-r0/git/fsbl-firmware
-pname fsbl-firmware -rp
/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/tmp/work/zcu102_zynqmp-poky-linux/fsbl-firmware/2022.2+gitAUTOINC+5330a64c8e-r0/git
-processor_ip psu_cortexa53 -hdf
/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/tmp/deploy/images/zcu102-zynqmp/Xilinx-zcu102-zynqmp.xsa
-arch 64 -app "Zynq MP FSBL" -yamlconf
/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/tmp/work/zcu102_zynqmp-poky-linux/fsbl-firmware/2022.2+gitAUTOINC+5330a64c8e-r0/fsbl-firmware.yaml
WARNING: sdtgen package cannot be loaded. System Device tree commands will not
be available
INFO: [Hsi 55-2053] elapsed time for repository
(/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/xsct/Vitis/2022.2/data/embeddedsw)
loading 0 seconds
INFO: Update hw fsbl-firmware_plat project
Loading the sw platform from
/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/tmp/work/zcu102_zynqmp-poky-linux/fsbl-firmware/2022.2+gitAUTOINC+5330a64c8e-r0/git/fsbl-firmware/fsbl-firmware_plat/platform.spr
Reading the platform : "fsbl-firmware_plat"
Opening the hardware design, this may take few seconds.
/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/xsct/Vitis/2022.2/gnu/microblaze/lin
WARNING: sysconfig command is DEPRECATED.
Only one system configuration will be allowed in a platform.
If no system configuration is present, creating a domain will create the system
configuration.
/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/xsct/Vitis/2022.2/gnu/microblaze/lin
INFO: create bsp using fsbl-firmware_domain
Note: updating the existing app sources with modified platform.
/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/xsct/Vitis/2022.2/gnu/microblaze/lin
ERROR: [Common 17-39] 'hsi::generate_app' failed due to earlier errors.
while executing
"::hsi::generate_app -app $hsitemplate"
(procedure "app" line 374)
invoked from within
"app create -name $params(pname) -lang c -template $params(app) -plnx"
invoked from within
"if { $params(ws) ne "" } {
#Local Work Space available
if { $params(pname) ne "" } {
# hwpname/bspname is empty then default it to pname+_hwproj/b..."
(file
"/home/builder/Workspaces/yocto/sfp_8b10_yocto/build/tmp/work/zcu102_zynqmp-poky-linux/fsbl-firmware/2022.2+gitAUTOINC+5330a64c8e-r0/app.tcl"
line 141)
WARNING: exit code 1 from a shell command.
Can anyone give a hint, what's wrong?
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#5102):
https://lists.yoctoproject.org/g/meta-xilinx/message/5102
Mute This Topic: https://lists.yoctoproject.org/mt/95495275/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-xilinx/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
