Hmm, the build succeeds, but the resulting FSBL doesn't boot. It gets stuck
after displaying this banner:
Xilinx Zynq MP First Stage Boot Loader
Release 2022.2 Oct 7 2022 - 04:56:16
Note that feeding the same XSA to petalinux works fine.
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: [email protected]
W: www.topic.nl
Please consider the environment before printing this e-mail
On 07-04-2023 09:34, Mike Looijmans via lists.yoctoproject.org wrote:
As, as it turns out, this is what you get when the HDF_* variables aren't set.
I set them in the machine conf, and now at least the build succeeds.
I assume that HDF_PATH can also point to a https server or so. Have it
pointing to a file for now.
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: [email protected]
W: www.topic.nl
Please consider the environment before printing this e-mail
On 07-04-2023 07:42, Mike Looijmans via lists.yoctoproject.org wrote:
This is where I get stuck with meta-xilinx-tools:
NOTE: Fetching xsct binary tarball from
http://petalinux.xilinx.com/sswreleases/rel-v2022/xsct-trim/xsct-2022-2.tar.xz;sha256sum=8a3272036ca61f017f357bf6ad9dfbdec6aebb39f43c3ca0cee7ec86ea4c066f;downloadfilename=xsct_2022.2.tar.xz
NOTE: Extracting external xsct-tarball to sysroots
Initialising tasks: 100%
|################################################################################################| Time: 0:02:14
Sstate summary: Wanted 1273 Local 1206 Mirrors 20 Missed 47 Current 0 (96%
match, 0% complete)
NOTE: Executing Tasks
WARNING: pmufw-1.0-r0 do_package_qa: QA Issue: File /boot/pmufw.elf in
package pmufw contains reference to TMPDIR [buildpaths]
ERROR: xilinx-bootbin-1.0-r0 do_configure: Expected file
//.../build/tmp-glibc/work/tdpzu9-oe-linux/xilinx-bootbin/1.0-r0/recipe-sysroot/boot/devicetree/tdpzu9.dtb, specified from the bif file does not exists!
ERROR: Logfile of failure stored in:
//.../build/tmp-glibc/work/tdpzu9-oe-linux/xilinx-bootbin/1.0-r0/temp/log.do_configure.25424
ERROR: Task
(//.../meta-xilinx/meta-xilinx-core/recipes-bsp/bootbin/xilinx-bootbin_1.0.bb:do_configure) failed with exit code '1'
WARNING: fsbl-1.0-r0 do_package_qa: QA Issue: File /boot/fsbl.elf in package
fsbl contains reference to TMPDIR [buildpaths]
NOTE: Tasks Summary: Attempted 3339 tasks of which 3011 didn't need to be
rerun and 1 failed.
Summary: 1 task failed:
/home/mike/projects/topic-platform-langdale/meta-xilinx/meta-xilinx-core/recipes-bsp/bootbin/xilinx-bootbin_1.0.bb:do_configure
Summary: There were 2 WARNING messages.
Summary: There was 1 ERROR message, returning a non-zero exit code.
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: [email protected]
W: www.topic.nl
Please consider the environment before printing this e-mail
On 06-04-2023 17:06, Mark Hatle via lists.yoctoproject.org wrote:
On 4/6/23 6:53 AM, Mike Looijmans wrote:
Ah, andmeta-xilinx-tools is not part of meta-xilinx, but in a separate
repo: https://github.com/Xilinx/meta-xilinx-tools.git
Okay, this seems to build, but that can't be the case. It appears to be
using some random defaults for DDR timing and such... So next is to figure
out where to put that information...
You need to provide your XSA to the build.
This is handled via the external-hdf recipe in meta-xilinx-tools:
https://github.com/Xilinx/meta-xilinx-tools/blob/master/recipes-bsp/hdf/external-hdf.bb
# HDF_BASE - file protocol
# HDF_PATH - Path to git repository, or file in question
# HDF_NAME - Path to the XSA file once downloaded (must be inside WORKDIR)
(See anon python)
HDF_BASE ??= "git://"
HDF_PATH ??= "github.com/Xilinx/hdf-examples.git"
HDF_NAME ??= ""
The above is the method we currently recommend for setting things. If your
XSA is in a git repository you can mimic the above. If you do use a git
repository, then the XSA is expected to be in a subdirectory that uses the
name in the "HDF_MACHINE" variable.
Otherwise if you just do:
HDF_BASE = "file://"
HDF_PATH = "/home/my_dir/my_project/my_board.xsa"
--Mark
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#5206):
https://lists.yoctoproject.org/g/meta-xilinx/message/5206
Mute This Topic: https://lists.yoctoproject.org/mt/98101406/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-xilinx/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
