> Hi Sandeep,
>
> We are using SD boot mode. This is a custom board, so unfortunately I
> cannot share the .xsa (unless we have an NDA with Xilinx - I don't recall).
>
> (I have an oscilloscope if you want me to take measurements on the power
> rails, FYI. Like I mentioned, from the forums power timing seems to be a
> common cause of PMU_SERVICE errors)
>
> Thanks,
> Chris
>
> > -----Original Message-----
> > From: [email protected] <meta-
> > [email protected]> On Behalf Of Sandeep Gundlupet Raju via
> > lists.yoctoproject.org
> > Sent: Friday, April 7, 2023 6:49 PM
> > To: LAPLANTE,CHRIS (Agilent USA) <[email protected]>;
> > [email protected]; [email protected];
> > Kohn, Chris <[email protected]>
> > Subject: Re: [meta-xilinx] PMU_SERVICE error and loading PMU FW using
> > CBR vs FSBL
> >
> >
> >
> > External Sender - Use caution opening files, clicking links, or
> > responding to requests.
> >
> >
> > Hi Chris,
> >
> > Which boot mode are you using? I usually use JTAG and SD boot mode
> > with Yocto built image and boot.bin works as expected on our eval boards.
By the way, here is our .bif file created by the patched meta-xilinx layer:
the_ROM_image:
{
[bootloader, destination_cpu=a53-0]
/home/laplante/next_yocto/honister/build/tmp/work/product-poky-linux/xilinx-bootbin/1.0-r0/recipe-sysroot/boot/fsbl.elf
[pmufw_image]
/home/laplante/next_yocto/honister/build/tmp/work/product-poky-linux/xilinx-bootbin/1.0-r0/recipe-sysroot/boot/pmufw.elf
[destination_device=pl]
/home/laplante/next_yocto/honister/build/tmp/work/product-poky-linux/xilinx-bootbin/1.0-r0/recipe-sysroot/boot/bitstream/download-product.bit
[destination_cpu=a53-0, exception_level=el-3, trustzone]
/home/laplante/next_yocto/honister/build/tmp/work/product-poky-linux/xilinx-bootbin/1.0-r0/recipe-sysroot/boot/arm-trusted-firmware.elf
[load=0x100000]
/home/laplante/next_yocto/honister/build/tmp/work/product-poky-linux/xilinx-bootbin/1.0-r0/recipe-sysroot/boot/devicetree/agilent-product.dtb
[destination_cpu=a53-0, exception_level=el-2]
/home/laplante/next_yocto/honister/build/tmp/work/product-poky-linux/xilinx-bootbin/1.0-r0/recipe-sysroot/boot/u-boot.elf
}
Thanks,
Chris
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#5214):
https://lists.yoctoproject.org/g/meta-xilinx/message/5214
Mute This Topic: https://lists.yoctoproject.org/mt/98128052/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-xilinx/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
