Hi all, I had been working on a project that uses Yoco to generate the Poky image for Picozed. (project uses Warrior release - planning to upgrade to a later release). Here is my use case: 1. boot using the SD card - OK. 2. access the eMMC and be able to read/write files on the eMMC - part that I am working/struggling with right now.
Currently, we only use the SD card and the eMMC isn't used because we can't access it. To double check that the eMMC is working, I was able to boot the Linux on eMMC (by changing the jumper switch) and I saw that the eMMC works and it is using the PetaLinux that came with it. I was able to generate and boot from the SD card. However, I am unable to see the eMMC. I tried modifying the contents of meta-xilinx\meta-xilinx-bsp\recipes-bsp\device-tree\files\picozed-zynq7.dts and I am seeing some behavior (sometimes it gets stucked saying "waiting for root"...) which I assume this is the file that needs to be modified. However, I had been doing trial and error on this file and can't figure out how to see the eMMC. Is there anything else that I need to do to be able to have access to the eMMC (like other files that needs to be modified, or any other Yocto/Bitbake configurations that needs to be done)? Thanks!
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#5257): https://lists.yoctoproject.org/g/meta-xilinx/message/5257 Mute This Topic: https://lists.yoctoproject.org/mt/100577079/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/meta-xilinx/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
