Signed-off-by: Manjukumar Matha <[email protected]> --- ...aze-kc705-Convert-microblaze-generic-to-k.patch | 1156 ++++++++++++++++++++ 1 file changed, 1156 insertions(+) create mode 100644 recipes-bsp/u-boot/u-boot-xlnx/microblaze-kc705-Convert-microblaze-generic-to-k.patch
diff --git a/recipes-bsp/u-boot/u-boot-xlnx/microblaze-kc705-Convert-microblaze-generic-to-k.patch b/recipes-bsp/u-boot/u-boot-xlnx/microblaze-kc705-Convert-microblaze-generic-to-k.patch new file mode 100644 index 0000000..05011f9 --- /dev/null +++ b/recipes-bsp/u-boot/u-boot-xlnx/microblaze-kc705-Convert-microblaze-generic-to-k.patch @@ -0,0 +1,1156 @@ +From 5b6177a13aa531125cf5a80cfca9746ea37d98e8 Mon Sep 17 00:00:00 2001 +From: Manjukumar Matha <[email protected]> +Date: Tue, 26 Apr 2016 17:16:25 -0700 +Subject: [PATCH] kc705-microblazeel: Convert microblaze-generic to kc705-microblazeel + +This is an update to earlier kc705-trd patch done by Nathan Rossi. Starting +from v2016.1, KC705 will no longer refer to deprecated KC705 TRD application. + +Change the microblaze-generic board to match the kc705-microblazeel. This patch +is not intended for upstream and serves as an intermediate solution +until OF support in upstream u-boot allows for easy support for custom +microblaze boards. + +Signed-off-by: Manjukumar Matha <[email protected]> +Upstream-Status: Not-Upstreamable [meta-xilinx/kc705 specific] +--- + arch/microblaze/dts/microblaze-generic.dts | 515 ++++++++++++++++++++++++++++ + board/xilinx/microblaze-generic/config.mk | 24 +- + configs/microblaze-generic_defconfig | 17 +- + include/configs/microblaze-generic.h | 520 +++++++++++------------------ + 4 files changed, 721 insertions(+), 355 deletions(-) + +diff --git a/arch/microblaze/dts/microblaze-generic.dts b/arch/microblaze/dts/microblaze-generic.dts +index 2033309..c97cf0d 100644 +--- a/arch/microblaze/dts/microblaze-generic.dts ++++ b/arch/microblaze/dts/microblaze-generic.dts +@@ -2,6 +2,521 @@ + / { + #address-cells = <1>; + #size-cells = <1>; ++ model = "Xilinx MicroBlaze"; ++ hard-reset-gpios = <0x1 0x0 0x1>; ++ compatible = "xlnx,microblaze"; ++ + aliases { ++ serial0 = "/amba_pl/serial@44a00000"; ++ ethernet0 = "/amba_pl/ethernet@40c00000"; ++ }; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200 earlyprintk"; ++ stdout-path = "serial0:115200ns"; ++ }; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x80000000 0x40000000>; ++ }; ++ ++ cpus { ++ #address-cells = <0x1>; ++ #cpus = <0x1>; ++ #size-cells = <0x0>; ++ ++ cpu@0 { ++ bus-handle = <0x2>; ++ clock-frequency = <0xbebc200>; ++ clocks = <0x3>; ++ compatible = "xlnx,microblaze-9.6"; ++ d-cache-baseaddr = <0x80000000>; ++ d-cache-highaddr = <0xbfffffff>; ++ d-cache-line-size = <0x20>; ++ d-cache-size = <0x4000>; ++ device_type = "cpu"; ++ i-cache-baseaddr = <0x80000000>; ++ i-cache-highaddr = <0xbfffffff>; ++ i-cache-line-size = <0x10>; ++ i-cache-size = <0x4000>; ++ interrupt-handle = <0x4>; ++ model = "microblaze,9.6"; ++ timebase-frequency = <0xbebc200>; ++ xlnx,addr-size = <0x20>; ++ xlnx,addr-tag-bits = <0x10>; ++ xlnx,allow-dcache-wr = <0x1>; ++ xlnx,allow-icache-wr = <0x1>; ++ xlnx,area-optimized = <0x0>; ++ xlnx,async-interrupt = <0x1>; ++ xlnx,async-wakeup = <0x3>; ++ xlnx,avoid-primitives = <0x0>; ++ xlnx,base-vectors = <0x0>; ++ xlnx,branch-target-cache-size = <0x0>; ++ xlnx,cache-byte-size = <0x4000>; ++ xlnx,d-axi = <0x1>; ++ xlnx,d-lmb = <0x1>; ++ xlnx,d-lmb-mon = <0x0>; ++ xlnx,daddr-size = <0x20>; ++ xlnx,data-size = <0x20>; ++ xlnx,dc-axi-mon = <0x0>; ++ xlnx,dcache-addr-tag = <0x10>; ++ xlnx,dcache-always-used = <0x1>; ++ xlnx,dcache-byte-size = <0x4000>; ++ xlnx,dcache-data-width = <0x0>; ++ xlnx,dcache-force-tag-lutram = <0x0>; ++ xlnx,dcache-line-len = <0x8>; ++ xlnx,dcache-use-writeback = <0x0>; ++ xlnx,dcache-victims = <0x0>; ++ xlnx,debug-counter-width = <0x20>; ++ xlnx,debug-enabled = <0x1>; ++ xlnx,debug-event-counters = <0x5>; ++ xlnx,debug-external-trace = <0x0>; ++ xlnx,debug-latency-counters = <0x1>; ++ xlnx,debug-profile-size = <0x0>; ++ xlnx,debug-trace-size = <0x2000>; ++ xlnx,div-zero-exception = <0x1>; ++ xlnx,dp-axi-mon = <0x0>; ++ xlnx,dynamic-bus-sizing = <0x0>; ++ xlnx,ecc-use-ce-exception = <0x0>; ++ xlnx,edge-is-positive = <0x1>; ++ xlnx,enable-discrete-ports = <0x0>; ++ xlnx,endianness = <0x1>; ++ xlnx,fault-tolerant = <0x0>; ++ xlnx,fpu-exception = <0x0>; ++ xlnx,freq = <0xbebc200>; ++ xlnx,fsl-exception = <0x0>; ++ xlnx,fsl-links = <0x0>; ++ xlnx,i-axi = <0x0>; ++ xlnx,i-lmb = <0x1>; ++ xlnx,i-lmb-mon = <0x0>; ++ xlnx,iaddr-size = <0x20>; ++ xlnx,ic-axi-mon = <0x0>; ++ xlnx,icache-always-used = <0x1>; ++ xlnx,icache-data-width = <0x0>; ++ xlnx,icache-force-tag-lutram = <0x0>; ++ xlnx,icache-line-len = <0x4>; ++ xlnx,icache-streams = <0x1>; ++ xlnx,icache-victims = <0x8>; ++ xlnx,ill-opcode-exception = <0x1>; ++ xlnx,imprecise-exceptions = <0x0>; ++ xlnx,instr-size = <0x20>; ++ xlnx,interconnect = <0x2>; ++ xlnx,interrupt-is-edge = <0x0>; ++ xlnx,interrupt-mon = <0x0>; ++ xlnx,ip-axi-mon = <0x0>; ++ xlnx,lockstep-select = <0x0>; ++ xlnx,lockstep-slave = <0x0>; ++ xlnx,mmu-dtlb-size = <0x4>; ++ xlnx,mmu-itlb-size = <0x2>; ++ xlnx,mmu-privileged-instr = <0x0>; ++ xlnx,mmu-tlb-access = <0x3>; ++ xlnx,mmu-zones = <0x2>; ++ xlnx,num-sync-ff-clk = <0x2>; ++ xlnx,num-sync-ff-clk-debug = <0x2>; ++ xlnx,num-sync-ff-clk-irq = <0x1>; ++ xlnx,num-sync-ff-dbg-clk = <0x1>; ++ xlnx,number-of-pc-brk = <0x1>; ++ xlnx,number-of-rd-addr-brk = <0x0>; ++ xlnx,number-of-wr-addr-brk = <0x0>; ++ xlnx,opcode-0x0-illegal = <0x1>; ++ xlnx,optimization = <0x0>; ++ xlnx,pc-width = <0x20>; ++ xlnx,pvr = <0x2>; ++ xlnx,pvr-user1 = <0x0>; ++ xlnx,pvr-user2 = <0x0>; ++ xlnx,reset-msr = <0x0>; ++ xlnx,sco = <0x0>; ++ xlnx,trace = <0x0>; ++ xlnx,unaligned-exceptions = <0x1>; ++ xlnx,use-barrel = <0x1>; ++ xlnx,use-branch-target-cache = <0x0>; ++ xlnx,use-config-reset = <0x0>; ++ xlnx,use-dcache = <0x1>; ++ xlnx,use-div = <0x1>; ++ xlnx,use-ext-brk = <0x0>; ++ xlnx,use-ext-nm-brk = <0x0>; ++ xlnx,use-extended-fsl-instr = <0x0>; ++ xlnx,use-fpu = <0x0>; ++ xlnx,use-hw-mul = <0x2>; ++ xlnx,use-icache = <0x1>; ++ xlnx,use-interrupt = <0x2>; ++ xlnx,use-mmu = <0x3>; ++ xlnx,use-msr-instr = <0x1>; ++ xlnx,use-non-secure = <0x0>; ++ xlnx,use-pcmp-instr = <0x1>; ++ xlnx,use-reorder-instr = <0x1>; ++ xlnx,use-stack-protection = <0x0>; ++ }; ++ }; ++ ++ clocks { ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ ++ clk_cpu@0 { ++ #clock-cells = <0x0>; ++ clock-frequency = <0xbebc200>; ++ clock-output-names = "clk_cpu"; ++ compatible = "fixed-clock"; ++ reg = <0x0>; ++ linux,phandle = <0x3>; ++ phandle = <0x3>; ++ }; ++ ++ clk_bus_0@1 { ++ #clock-cells = <0x0>; ++ clock-frequency = <0xbebc200>; ++ clock-output-names = "clk_bus_0"; ++ compatible = "fixed-clock"; ++ reg = <0x1>; ++ linux,phandle = <0x8>; ++ phandle = <0x8>; ++ }; ++ }; ++ ++ amba_pl { ++ #address-cells = <0x1>; ++ #size-cells = <0x1>; ++ compatible = "simple-bus"; ++ ranges; ++ linux,phandle = <0x2>; ++ phandle = <0x2>; ++ ++ ethernet@40c00000 { ++ axistream-connected = <0x5>; ++ axistream-control-connected = <0x5>; ++ clock-frequency = <0x5f5e100>; ++ compatible = "xlnx,axi-ethernet-1.00.a"; ++ device_type = "network"; ++ interrupt-parent = <0x4>; ++ interrupts = <0x4 0x2>; ++ phy-mode = "gmii"; ++ reg = <0x40c00000 0x40000>; ++ xlnx = <0x0>; ++ xlnx,axiliteclkrate = <0x0>; ++ xlnx,axisclkrate = <0x0>; ++ xlnx,gt-type = <0x0>; ++ xlnx,phy-type = <0x1>; ++ xlnx,phyaddr = <0x1>; ++ xlnx,rable = <0x0>; ++ xlnx,rxcsum = <0x0>; ++ xlnx,rxlane0-placement = <0x0>; ++ xlnx,rxlane1-placement = <0x0>; ++ xlnx,rxmem = <0x1000>; ++ xlnx,rxnibblebitslice0used = <0x1>; ++ xlnx,tx-in-upper-nibble = <0x1>; ++ xlnx,txcsum = <0x0>; ++ xlnx,txlane0-placement = <0x0>; ++ xlnx,txlane1-placement = <0x0>; ++ local-mac-address = [00 0a 35 00 22 01]; ++ phy-handle = <0x6>; ++ linux,phandle = <0x7>; ++ phandle = <0x7>; ++ ++ mdio { ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ ++ phy@7 { ++ compatible = "marvell,88e1111"; ++ device_type = "ethernet-phy"; ++ reg = <0x7>; ++ linux,phandle = <0x6>; ++ phandle = <0x6>; ++ }; ++ }; ++ }; ++ ++ dma@41e00000 { ++ #dma-cells = <0x1>; ++ axistream-connected = <0x7>; ++ axistream-control-connected = <0x7>; ++ compatible = "xlnx,axi-dma-1.00.a"; ++ interrupt-parent = <0x4>; ++ interrupts = <0x3 0x2 0x2 0x2>; ++ reg = <0x41e00000 0x10000>; ++ linux,phandle = <0x5>; ++ phandle = <0x5>; ++ }; ++ ++ timer@41c00000 { ++ clock-frequency = <0xbebc200>; ++ clocks = <0x8>; ++ compatible = "xlnx,xps-timer-1.00.a"; ++ interrupt-parent = <0x4>; ++ interrupts = <0x5 0x2>; ++ reg = <0x41c00000 0x10000>; ++ xlnx,count-width = <0x20>; ++ xlnx,gen0-assert = <0x1>; ++ xlnx,gen1-assert = <0x1>; ++ xlnx,one-timer-only = <0x0>; ++ xlnx,trig0-assert = <0x1>; ++ xlnx,trig1-assert = <0x1>; ++ }; ++ ++ gpio@40010000 { ++ #gpio-cells = <0x2>; ++ compatible = "xlnx,xps-gpio-1.00.a"; ++ gpio-controller; ++ reg = <0x40010000 0x10000>; ++ xlnx,all-inputs = <0x1>; ++ xlnx,all-inputs-2 = <0x0>; ++ xlnx,all-outputs = <0x0>; ++ xlnx,all-outputs-2 = <0x0>; ++ xlnx,dout-default = <0x0>; ++ xlnx,dout-default-2 = <0x0>; ++ xlnx,gpio-width = <0x4>; ++ xlnx,gpio2-width = <0x20>; ++ xlnx,interrupt-present = <0x0>; ++ xlnx,is-dual = <0x0>; ++ xlnx,tri-default = <0xffffffff>; ++ xlnx,tri-default-2 = <0xffffffff>; ++ }; ++ ++ i2c@40800000 { ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ compatible = "xlnx,xps-iic-2.00.a"; ++ interrupt-parent = <0x4>; ++ interrupts = <0x1 0x2>; ++ reg = <0x40800000 0x10000>; ++ ++ i2cswitch@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ reg = <0x74>; ++ ++ i2c@0 { ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ reg = <0x0>; ++ ++ clock-generator@5d { ++ #clock-cells = <0x0>; ++ compatible = "silabs,si570"; ++ temperature-stability = <0x32>; ++ reg = <0x5d>; ++ factory-fout = <0x9502f90>; ++ clock-frequency = <0x8d9ee20>; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ reg = <0x3>; ++ ++ eeprom@54 { ++ compatible = "at,24c08"; ++ reg = <0x54>; ++ }; ++ }; ++ }; ++ }; ++ ++ gpio@40020000 { ++ #gpio-cells = <0x2>; ++ compatible = "xlnx,xps-gpio-1.00.a"; ++ gpio-controller; ++ reg = <0x40020000 0x10000>; ++ xlnx,all-inputs = <0x0>; ++ xlnx,all-inputs-2 = <0x0>; ++ xlnx,all-outputs = <0x1>; ++ xlnx,all-outputs-2 = <0x0>; ++ xlnx,dout-default = <0x0>; ++ xlnx,dout-default-2 = <0x0>; ++ xlnx,gpio-width = <0x8>; ++ xlnx,gpio2-width = <0x20>; ++ xlnx,interrupt-present = <0x0>; ++ xlnx,is-dual = <0x0>; ++ xlnx,tri-default = <0xffffffff>; ++ xlnx,tri-default-2 = <0xffffffff>; ++ }; ++ ++ flash@60000000 { ++ bank-width = <0x2>; ++ compatible = "cfi-flash"; ++ reg = <0x60000000 0x8000000>; ++ xlnx,axi-clk-period-ps = <0x1388>; ++ xlnx,include-datawidth-matching-0 = <0x1>; ++ xlnx,include-datawidth-matching-1 = <0x1>; ++ xlnx,include-datawidth-matching-2 = <0x1>; ++ xlnx,include-datawidth-matching-3 = <0x1>; ++ xlnx,include-negedge-ioregs = <0x0>; ++ xlnx,lflash-period-ps = <0x1388>; ++ xlnx,linear-flash-sync-burst = <0x0>; ++ xlnx,max-mem-width = <0x10>; ++ xlnx,mem-a-lsb = <0x0>; ++ xlnx,mem-a-msb = <0x1f>; ++ xlnx,mem0-type = <0x2>; ++ xlnx,mem0-width = <0x10>; ++ xlnx,mem1-type = <0x0>; ++ xlnx,mem1-width = <0x10>; ++ xlnx,mem2-type = <0x0>; ++ xlnx,mem2-width = <0x10>; ++ xlnx,mem3-type = <0x0>; ++ xlnx,mem3-width = <0x10>; ++ xlnx,num-banks-mem = <0x1>; ++ xlnx,page-size = <0x10>; ++ xlnx,parity-type-mem-0 = <0x0>; ++ xlnx,parity-type-mem-1 = <0x0>; ++ xlnx,parity-type-mem-2 = <0x0>; ++ xlnx,parity-type-mem-3 = <0x0>; ++ xlnx,port-diff = <0x0>; ++ xlnx,s-axi-en-reg = <0x0>; ++ xlnx,s-axi-mem-addr-width = <0x20>; ++ xlnx,s-axi-mem-data-width = <0x20>; ++ xlnx,s-axi-mem-id-width = <0x1>; ++ xlnx,s-axi-reg-addr-width = <0x5>; ++ xlnx,s-axi-reg-data-width = <0x20>; ++ xlnx,synch-pipedelay-0 = <0x1>; ++ xlnx,synch-pipedelay-1 = <0x1>; ++ xlnx,synch-pipedelay-2 = <0x1>; ++ xlnx,synch-pipedelay-3 = <0x1>; ++ xlnx,tavdv-ps-mem-0 = <0x1fbd0>; ++ xlnx,tavdv-ps-mem-1 = <0x3a98>; ++ xlnx,tavdv-ps-mem-2 = <0x3a98>; ++ xlnx,tavdv-ps-mem-3 = <0x3a98>; ++ xlnx,tcedv-ps-mem-0 = <0x1fbd0>; ++ xlnx,tcedv-ps-mem-1 = <0x3a98>; ++ xlnx,tcedv-ps-mem-2 = <0x3a98>; ++ xlnx,tcedv-ps-mem-3 = <0x3a98>; ++ xlnx,thzce-ps-mem-0 = <0x88b8>; ++ xlnx,thzce-ps-mem-1 = <0x1b58>; ++ xlnx,thzce-ps-mem-2 = <0x1b58>; ++ xlnx,thzce-ps-mem-3 = <0x1b58>; ++ xlnx,thzoe-ps-mem-0 = <0x1b58>; ++ xlnx,thzoe-ps-mem-1 = <0x1b58>; ++ xlnx,thzoe-ps-mem-2 = <0x1b58>; ++ xlnx,thzoe-ps-mem-3 = <0x1b58>; ++ xlnx,tlzwe-ps-mem-0 = <0xc350>; ++ xlnx,tlzwe-ps-mem-1 = <0x0>; ++ xlnx,tlzwe-ps-mem-2 = <0x0>; ++ xlnx,tlzwe-ps-mem-3 = <0x0>; ++ xlnx,tpacc-ps-flash-0 = <0x61a8>; ++ xlnx,tpacc-ps-flash-1 = <0x61a8>; ++ xlnx,tpacc-ps-flash-2 = <0x61a8>; ++ xlnx,tpacc-ps-flash-3 = <0x61a8>; ++ xlnx,twc-ps-mem-0 = <0x11170>; ++ xlnx,twc-ps-mem-1 = <0x3a98>; ++ xlnx,twc-ps-mem-2 = <0x3a98>; ++ xlnx,twc-ps-mem-3 = <0x3a98>; ++ xlnx,twp-ps-mem-0 = <0x13880>; ++ xlnx,twp-ps-mem-1 = <0x2ee0>; ++ xlnx,twp-ps-mem-2 = <0x2ee0>; ++ xlnx,twp-ps-mem-3 = <0x2ee0>; ++ xlnx,twph-ps-mem-0 = <0x13880>; ++ xlnx,twph-ps-mem-1 = <0x2ee0>; ++ xlnx,twph-ps-mem-2 = <0x2ee0>; ++ xlnx,twph-ps-mem-3 = <0x2ee0>; ++ xlnx,use-startup = <0x0>; ++ xlnx,use-startup-int = <0x0>; ++ xlnx,wr-rec-time-mem-0 = <0x186a0>; ++ xlnx,wr-rec-time-mem-1 = <0x6978>; ++ xlnx,wr-rec-time-mem-2 = <0x6978>; ++ xlnx,wr-rec-time-mem-3 = <0x6978>; ++ #address-cells = <0x1>; ++ #size-cells = <0x1>; ++ ++ partition@0x00000000 { ++ label = "fpga"; ++ reg = <0x0 0xb00000>; ++ }; ++ ++ partition@0x00b00000 { ++ label = "boot"; ++ reg = <0xb00000 0x60000>; ++ }; ++ ++ partition@0x00b60000 { ++ label = "bootenv"; ++ reg = <0xb60000 0x20000>; ++ }; ++ ++ partition@0x00b80000 { ++ label = "kernel"; ++ reg = <0xb80000 0xc00000>; ++ }; ++ ++ partition@0x01780000 { ++ label = "spare"; ++ reg = <0x1780000 0x0>; ++ }; ++ }; ++ ++ interrupt-controller@41200000 { ++ #interrupt-cells = <0x2>; ++ compatible = "xlnx,xps-intc-1.00.a"; ++ interrupt-controller; ++ reg = <0x41200000 0x10000>; ++ xlnx,kind-of-intr = <0x0>; ++ xlnx,num-intr-inputs = <0x6>; ++ linux,phandle = <0x4>; ++ phandle = <0x4>; ++ }; ++ ++ gpio@40030000 { ++ #gpio-cells = <0x2>; ++ compatible = "xlnx,xps-gpio-1.00.a"; ++ gpio-controller; ++ reg = <0x40030000 0x10000>; ++ xlnx,all-inputs = <0x1>; ++ xlnx,all-inputs-2 = <0x0>; ++ xlnx,all-outputs = <0x0>; ++ xlnx,all-outputs-2 = <0x0>; ++ xlnx,dout-default = <0x0>; ++ xlnx,dout-default-2 = <0x0>; ++ xlnx,gpio-width = <0x5>; ++ xlnx,gpio2-width = <0x20>; ++ xlnx,interrupt-present = <0x0>; ++ xlnx,is-dual = <0x0>; ++ xlnx,tri-default = <0xffffffff>; ++ xlnx,tri-default-2 = <0xffffffff>; ++ }; ++ ++ gpio@40000000 { ++ #gpio-cells = <0x2>; ++ compatible = "xlnx,xps-gpio-1.00.a"; ++ gpio-controller; ++ reg = <0x40000000 0x10000>; ++ xlnx,all-inputs = <0x0>; ++ xlnx,all-inputs-2 = <0x0>; ++ xlnx,all-outputs = <0x1>; ++ xlnx,all-outputs-2 = <0x0>; ++ xlnx,dout-default = <0x0>; ++ xlnx,dout-default-2 = <0x0>; ++ xlnx,gpio-width = <0x1>; ++ xlnx,gpio2-width = <0x20>; ++ xlnx,interrupt-present = <0x0>; ++ xlnx,is-dual = <0x0>; ++ xlnx,tri-default = <0xffffffff>; ++ xlnx,tri-default-2 = <0xffffffff>; ++ linux,phandle = <0x1>; ++ phandle = <0x1>; ++ }; ++ ++ serial@44a00000 { ++ clock-frequency = <0xbebc200>; ++ clocks = <0x8>; ++ compatible = "xlnx,xps-uart16550-2.00.a", "ns16550a"; ++ current-speed = <0x1c200>; ++ device_type = "serial"; ++ interrupt-parent = <0x4>; ++ interrupts = <0x0 0x2>; ++ port-number = <0x0>; ++ reg = <0x44a00000 0x10000>; ++ reg-offset = <0x1000>; ++ reg-shift = <0x2>; ++ xlnx,external-xin-clk-hz = <0x17d7840>; ++ xlnx,external-xin-clk-hz-d = <0x19>; ++ xlnx,has-external-rclk = <0x0>; ++ xlnx,has-external-xin = <0x0>; ++ xlnx,is-a-16550 = <0x1>; ++ xlnx,s-axi-aclk-freq-hz-d = "200.0"; ++ xlnx,use-modem-ports = <0x1>; ++ xlnx,use-user-ports = <0x1>; ++ }; + } ; + } ; +diff --git a/board/xilinx/microblaze-generic/config.mk b/board/xilinx/microblaze-generic/config.mk +index 36bdd96..0b301bb 100644 +--- a/board/xilinx/microblaze-generic/config.mk ++++ b/board/xilinx/microblaze-generic/config.mk +@@ -1,18 +1,10 @@ +-# +-# (C) Copyright 2007 Michal Simek +-# +-# Michal SIMEK <[email protected]> +-# +-# SPDX-License-Identifier: GPL-2.0+ +-# +-# CAUTION: This file is a faked configuration !!! +-# There is no real target for the microblaze-generic +-# configuration. You have to replace this file with +-# the generated file from your Xilinx design flow. +-# ++TEXT_BASE = 0x80400000 ++CONFIG_SYS_TEXT_BASE = 0x80400000 + +-CONFIG_SYS_TEXT_BASE = 0x29000000 +- +-PLATFORM_CPPFLAGS += -mno-xl-soft-mul +-PLATFORM_CPPFLAGS += -mno-xl-soft-div + PLATFORM_CPPFLAGS += -mxl-barrel-shift ++PLATFORM_CPPFLAGS += -mno-xl-soft-div ++PLATFORM_CPPFLAGS += -mxl-pattern-compare ++PLATFORM_CPPFLAGS += -mxl-multiply-high ++PLATFORM_CPPFLAGS += -mno-xl-soft-mul ++PLATFORM_CPPFLAGS += -mcpu=v9.6 ++PLATFORM_CPPFLAGS += -fgnu89-inline +diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig +index 21a7261..0d9e318 100644 +--- a/configs/microblaze-generic_defconfig ++++ b/configs/microblaze-generic_defconfig +@@ -1,23 +1,12 @@ + CONFIG_MICROBLAZE=y +-CONFIG_SPL_SYS_MALLOC_SIMPLE=y +-CONFIG_SPL_DM=y + CONFIG_TARGET_MICROBLAZE_GENERIC=y + CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" +-CONFIG_SPL=y +-CONFIG_FIT=y +-CONFIG_FIT_VERBOSE=y +-CONFIG_HUSH_PARSER=y +-CONFIG_SYS_PROMPT="U-Boot-mONStR> " +-CONFIG_CMD_GPIO=y ++CONFIG_SYS_PROMPT="U-Boot> " + # CONFIG_CMD_SETEXPR is not set +-CONFIG_CMD_TFTPPUT=y +-CONFIG_CMD_DHCP=y + CONFIG_CMD_PING=y +-CONFIG_SPL_OF_CONTROL=y + CONFIG_OF_EMBED=y +-CONFIG_NETCONSOLE=y + CONFIG_DM_ETH=y ++CONFIG_CMD_DHCP=y + CONFIG_XILINX_AXIEMAC=y +-CONFIG_XILINX_EMACLITE=y + CONFIG_SYS_NS16550=y +-CONFIG_XILINX_UARTLITE=y ++CONFIG_REQUIRE_SERIAL_CONSOLE=y +diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h +index b424782..4a1e079 100644 +--- a/include/configs/microblaze-generic.h ++++ b/include/configs/microblaze-generic.h +@@ -1,343 +1,213 @@ +-/* +- * (C) Copyright 2007-2010 Michal Simek +- * +- * Michal SIMEK <[email protected]> +- * +- * SPDX-License-Identifier: GPL-2.0+ +- */ +- + #ifndef __CONFIG_H + #define __CONFIG_H + +-#include "../board/xilinx/microblaze-generic/xparameters.h" +- +-/* MicroBlaze CPU */ +-#define MICROBLAZE_V5 1 +- +-/* linear and spi flash memory */ +-#ifdef XILINX_FLASH_START +-#define FLASH +-#undef SPIFLASH +-#undef RAMENV /* hold environment in flash */ +-#else +-#ifdef XILINX_SPI_FLASH_BASEADDR +-#undef FLASH +-#define SPIFLASH +-#undef RAMENV /* hold environment in flash */ +-#else +-#undef FLASH +-#undef SPIFLASH +-#define RAMENV /* hold environment in RAM */ +-#endif +-#endif +- +-/* uart */ +-# define CONFIG_BAUDRATE 115200 + /* The following table includes the supported baudrates */ +-# define CONFIG_SYS_BAUDRATE_TABLE \ +- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} +- +-/* setting reset address */ +-/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/ +- +-/* gpio */ +-#ifdef XILINX_GPIO_BASEADDR +-# define CONFIG_XILINX_GPIO +-# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR +-#endif +-#define CONFIG_BOARD_LATE_INIT +- +-/* watchdog */ +-#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ) +-# define CONFIG_WATCHDOG_BASEADDR XILINX_WATCHDOG_BASEADDR +-# define CONFIG_WATCHDOG_IRQ XILINX_WATCHDOG_IRQ +-# ifndef CONFIG_SPL_BUILD +-# define CONFIG_HW_WATCHDOG +-# define CONFIG_XILINX_TB_WATCHDOG +-# endif +-#endif +- +-#define CONFIG_SYS_MALLOC_LEN 0xC0000 +- +-/* Stack location before relocation */ +-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - \ +- CONFIG_SYS_MALLOC_F_LEN) +- +-/* +- * CFI flash memory layout - Example +- * CONFIG_SYS_FLASH_BASE = 0x2200_0000; +- * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB +- * +- * SECT_SIZE = 0x20000; 128kB is one sector +- * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store +- * +- * 0x2200_0000 CONFIG_SYS_FLASH_BASE +- * FREE 256kB +- * 0x2204_0000 CONFIG_ENV_ADDR +- * ENV_AREA 128kB +- * 0x2206_0000 +- * FREE +- * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE +- * +- */ +- +-#ifdef FLASH +-# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START +-# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE +-# define CONFIG_SYS_FLASH_CFI 1 +-# define CONFIG_FLASH_CFI_DRIVER 1 +-/* ?empty sector */ +-# define CONFIG_SYS_FLASH_EMPTY_INFO 1 +-/* max number of memory banks */ +-# define CONFIG_SYS_MAX_FLASH_BANKS 1 +-/* max number of sectors on one chip */ +-# define CONFIG_SYS_MAX_FLASH_SECT 512 +-/* hardware flash protection */ +-# define CONFIG_SYS_FLASH_PROTECTION +-/* use buffered writes (20x faster) */ +-# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +-# ifdef RAMENV +-# define CONFIG_ENV_IS_NOWHERE 1 +-# define CONFIG_ENV_SIZE 0x1000 +-# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) +- +-# else /* FLASH && !RAMENV */ +-# define CONFIG_ENV_IS_IN_FLASH 1 +-/* 128K(one sector) for env */ +-# define CONFIG_ENV_SECT_SIZE 0x20000 +-# define CONFIG_ENV_ADDR \ +- (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) +-# define CONFIG_ENV_SIZE 0x20000 +-# endif /* FLASH && !RAMBOOT */ +-#else /* !FLASH */ +- +-#ifdef SPIFLASH +-# define CONFIG_SYS_NO_FLASH 1 +-# define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR +-# define CONFIG_SPI 1 +-# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 +-# define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ +-# define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS +- +-# ifdef RAMENV +-# define CONFIG_ENV_IS_NOWHERE 1 +-# define CONFIG_ENV_SIZE 0x1000 +-# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) +- +-# else /* SPIFLASH && !RAMENV */ +-# define CONFIG_ENV_IS_IN_SPI_FLASH 1 +-# define CONFIG_ENV_SPI_MODE SPI_MODE_3 +-# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +-# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +-/* 128K(two sectors) for env */ +-# define CONFIG_ENV_SECT_SIZE 0x10000 +-# define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE) +-/* Warning: adjust the offset in respect of other flash content and size */ +-# define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */ +-# endif /* SPIFLASH && !RAMBOOT */ +-#else /* !SPIFLASH */ +- +-/* ENV in RAM */ +-# define CONFIG_SYS_NO_FLASH 1 +-# define CONFIG_ENV_IS_NOWHERE 1 +-# define CONFIG_ENV_SIZE 0x1000 +-# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) +-#endif /* !SPIFLASH */ +-#endif /* !FLASH */ +- +-#if defined(XILINX_USE_ICACHE) +-# define CONFIG_ICACHE +-#else +-# undef CONFIG_ICACHE +-#endif +- +-#if defined(XILINX_USE_DCACHE) +-# define CONFIG_DCACHE +-#else +-# undef CONFIG_DCACHE +-#endif +- +-#ifndef XILINX_DCACHE_BYTE_SIZE +-#define XILINX_DCACHE_BYTE_SIZE 32768 +-#endif +- +-/* +- * BOOTP options +- */ ++#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200, 230400} ++ ++/* use serial multi for all serial devices */ ++#define CONFIG_SERIAL_MULTI ++#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 ++ ++/* Board name */ ++#define XILINX_BOARD_NAME Xilinx-KC705-2016_1 ++#define CONFIG_HOSTNAME XILINX_BOARD_NAME ++ ++/* processor - microblaze_0 */ ++#define XILINX_USE_MSR_INSTR 1 ++#define XILINX_FSL_LINKS 0 ++#define XILINX_USE_ICACHE 1 ++#define XILINX_USE_DCACHE 1 ++#define XILINX_DCACHE_BYTE_SIZE 16384 ++#define XILINX_PVR 2 ++#define MICROBLAZE_V5 ++#define CONFIG_CMD_IRQ ++#define CONFIG_DCACHE ++#define CONFIG_ICACHE ++ ++/* main_memory - ddr3_sdram */ ++#define CONFIG_SYS_SDRAM_BASE 0x80000000 ++#define CONFIG_SYS_SDRAM_SIZE 0x40000000 ++ ++/* Memory testing handling */ ++#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE ++#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) ++#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default load address */ ++ ++/* global pointer options */ ++#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_SIZE - GENERATED_GBL_DATA_SIZE) ++ ++/* Size of malloc() pool */ ++#define SIZE 0x100000 ++#define CONFIG_SYS_MALLOC_LEN SIZE ++#define CONFIG_SYS_MONITOR_LEN SIZE ++#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE) ++#define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) ++#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) ++ ++/* stack */ ++#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_F_LEN) ++ ++/* No of_control support yet*/ ++ ++/* uart - rs232_uart */ ++#define XILINX_UART16550_BASEADDR 0x44A00000 ++#define CONFIG_UART16550 1 ++#define CONFIG_CONS_INDEX 1 ++#define CONFIG_SYS_NS16550_COM1 ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000) ++#define CONFIG_SYS_NS16550_REG_SIZE -4 ++#define CONSOLE_ARG "console=console=ttyS0,115200\0" ++#define CONFIG_SYS_NS16550_SERIAL ++#define ESERIAL0 "eserial0=setenv stdout eserial0;setenv stdin eserial0\0" ++#define SERIAL_MULTI "serial=setenv stdout serial;setenv stdin serial\0" ++#define CONFIG_SYS_NS16550_CLK 200000000 ++#define CONFIG_BAUDRATE 115200 ++ ++/* ethernet - axi_ethernet */ ++#define XILINX_AXIEMAC_BASEADDR 0x40C00000 ++#define CONFIG_PHY_XILINX ++#define CONFIG_SYS_ENET ++#define CONFIG_MII ++#define CONFIG_PHY_GIGE ++#define CONFIG_PHY_MARVELL ++#define CONFIG_PHY_NATSEMI ++#define CONFIG_NET_MULTI ++#define CONFIG_BOOTP_MAY_FAIL ++#define CONFIG_NETCONSOLE 1 ++#define XILINX_AXIDMA_BASEADDR 0x41E00000 ++#define CONFIG_SERVERIP 172.19.5.102 ++#define CONFIG_IPADDR ++ ++/* nor_flash - linear_flash */ ++#define CONFIG_SYS_FLASH_BASE 0x60000000 ++#define CONFIG_SYS_FLASH_END 0x68000000 ++#define CONFIG_SYS_MAX_FLASH_SECT 2048 ++#define CONFIG_SYS_FLASH_PROTECTION ++#define CONFIG_SYS_FLASH_EMPTY_INFO ++#define CONFIG_SYS_FLASH_CFI ++#define CONFIG_FLASH_CFI_DRIVER ++#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE ++#define CONFIG_SYS_MAX_FLASH_BANKS 1 ++#define CONFIG_ENV_IS_IN_FLASH ++#define CONFIG_ENV_ADDR 0x60b60000 ++#define CONFIG_ENV_SIZE 0x20000 ++#define CONFIG_ENV_SECT_SIZE 0x20000 ++ ++/* timer - axi_timer_0 */ ++#define CONFIG_SYS_TIMER_0_ADDR 0x41C00000 ++#define CONFIG_SYS_TIMER_0 1 ++#define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) ++#define CONFIG_SYS_TIMER_0_IRQ 5 ++#define FREQUENCE 200000000 ++#define XILINX_CLOCK_FREQ 200000000 ++ ++/* gpio - reset_gpio */ ++#define XILINX_GPIO_BASEADDR 0x40000000 ++#define CONFIG_SYS_GPIO_0_ADDR 0x40000000 ++#define CONFIG_XILINX_GPIO ++ ++/* intc - microblaze_0_axi_intc */ ++#define CONFIG_SYS_INTC_0_ADDR 0x41200000 ++#define CONFIG_SYS_INTC_0_NUM 6 ++#define CONFIG_SYS_INTC_0 1 ++ ++/* FPGA */ ++ ++/* Make the BOOTM LEN big enough for the compressed image */ ++#define CONFIG_SYS_BOOTM_LEN 0x1000000 ++ ++ ++/* BOOTP options */ ++#define CONFIG_BOOTP_SERVERIP + #define CONFIG_BOOTP_BOOTFILESIZE + #define CONFIG_BOOTP_BOOTPATH + #define CONFIG_BOOTP_GATEWAY + #define CONFIG_BOOTP_HOSTNAME + +-/* +- * Command line configuration. +- */ ++/*Command line configuration.*/ + #define CONFIG_CMD_ASKENV +-#define CONFIG_CMD_IRQ +-#define CONFIG_CMD_MFSL +- +-#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE) +-# define CONFIG_CMD_CACHE +-#else +-# undef CONFIG_CMD_CACHE +-#endif +- +-#if defined(FLASH) +-# define CONFIG_CMD_JFFS2 +-# define CONFIG_CMD_UBI +-# undef CONFIG_CMD_UBIFS +- +-# if !defined(RAMENV) +-# define CONFIG_CMD_SAVES +-# endif +- +-#else +-#if defined(SPIFLASH) +-# define CONFIG_CMD_SF +- +-# if !defined(RAMENV) +-# define CONFIG_CMD_SAVES +-# endif +-#else +-# undef CONFIG_CMD_JFFS2 +-# undef CONFIG_CMD_UBI +-# undef CONFIG_CMD_UBIFS +-#endif +-#endif +- +-#if defined(CONFIG_CMD_JFFS2) +-# define CONFIG_MTD_PARTITIONS +-#endif +- +-#if defined(CONFIG_CMD_UBIFS) +-# define CONFIG_CMD_UBI +-# define CONFIG_LZO +-#endif +- +-#if defined(CONFIG_CMD_UBI) +-# define CONFIG_MTD_PARTITIONS +-# define CONFIG_RBTREE +-#endif +- +-#if defined(CONFIG_MTD_PARTITIONS) +-/* MTD partitions */ +-#define CONFIG_CMD_MTDPARTS /* mtdparts command line support */ +-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +-#define CONFIG_FLASH_CFI_MTD +-#define MTDIDS_DEFAULT "nor0=flash-0" +- +-/* default mtd partition table */ +-#define MTDPARTS_DEFAULT "mtdparts=flash-0:256k(u-boot),"\ +- "256k(env),3m(kernel),1m(romfs),"\ +- "1m(cramfs),-(jffs2)" +-#endif +- +-/* size of console buffer */ +-#define CONFIG_SYS_CBSIZE 512 +- /* print buffer size */ +-#define CONFIG_SYS_PBSIZE \ +- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +-/* max number of command args */ +-#define CONFIG_SYS_MAXARGS 15 +-#define CONFIG_SYS_LONGHELP +-/* default load address */ +-#define CONFIG_SYS_LOAD_ADDR 0 +- +-#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +-#define CONFIG_BOOTARGS "root=romfs" +-#define CONFIG_HOSTNAME XILINX_BOARD_NAME +-#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" +-#define CONFIG_IPADDR 192.168.0.3 +-#define CONFIG_SERVERIP 192.168.0.5 +-#define CONFIG_GATEWAYIP 192.168.0.1 ++#define CONFIG_CMDLINE_EDITING ++#define CONFIG_CMD_SAVES ++ ++/* Miscellaneous configurable options */ ++#define CONFIG_SYS_CBSIZE 2048/* Console I/O Buffer Size */ ++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) ++ ++/* Boot Argument Buffer Size */ ++#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ ++#define CONFIG_SYS_LONGHELP + + /* architecture dependent code */ +-#define CONFIG_SYS_USR_EXCEP /* user exception */ ++#define CONFIG_SYS_USR_EXCEP /* user exception */ ++#define CONFIG_SYS_HZ 1000 + +-#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo" ++/* Use the HUSH parser */ ++#define CONFIG_SYS_HUSH_PARSER ++#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +-#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \ +- "nor0=flash-0\0"\ +- "mtdparts=mtdparts=flash-0:"\ +- "256k(u-boot),256k(env),3m(kernel),"\ +- "1m(romfs),1m(cramfs),-(jffs2)\0"\ +- "nc=setenv stdout nc;"\ +- "setenv stdin nc\0" \ +- "serial=setenv stdout serial;"\ +- "setenv stdin serial\0" ++/* auto-boot delay */ ++#define CONFIG_BOOTDELAY 4 + +-#define CONFIG_CMDLINE_EDITING ++/* Don't define BOOTARGS, we get it from the DTB chosen fragment */ ++#undef CONFIG_BOOTARGS + +-#define CONFIG_SYS_CONSOLE_IS_IN_ENV ++#define CONFIG_ENV_OVERWRITE /* Allow to overwrite the u-boot environment variables */ + +-/* Enable flat device tree support */ +-#define CONFIG_LMB 1 ++/* FIT image support */ ++#define CONFIG_FIT 1 ++#define CONFIG_LMB + #define CONFIG_OF_LIBFDT 1 +- +-#if defined(CONFIG_XILINX_AXIEMAC) +-# define CONFIG_MII 1 +-# define CONFIG_CMD_MII 1 +-# define CONFIG_PHY_GIGE 1 +-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 +-# define CONFIG_PHY_ATHEROS 1 +-# define CONFIG_PHY_BROADCOM 1 +-# define CONFIG_PHY_DAVICOM 1 +-# define CONFIG_PHY_LXT 1 +-# define CONFIG_PHY_MARVELL 1 +-# define CONFIG_PHY_MICREL 1 +-# define CONFIG_PHY_MICREL_KSZ9021 +-# define CONFIG_PHY_NATSEMI 1 +-# define CONFIG_PHY_REALTEK 1 +-# define CONFIG_PHY_VITESSE 1 +-#else +-# undef CONFIG_MII +-# undef CONFIG_CMD_MII +-#endif +- +-/* SPL part */ +-#define CONFIG_CMD_SPL +-#define CONFIG_SPL_FRAMEWORK +-#define CONFIG_SPL_LIBCOMMON_SUPPORT +-#define CONFIG_SPL_LIBGENERIC_SUPPORT +-#define CONFIG_SPL_SERIAL_SUPPORT +-#define CONFIG_SPL_BOARD_INIT +- +-#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" +- +-#define CONFIG_SPL_RAM_DEVICE +-#ifdef CONFIG_SYS_FLASH_BASE +-# define CONFIG_SPL_NOR_SUPPORT +-# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE +-#endif +- +-/* for booting directly linux */ +-#define CONFIG_SPL_OS_BOOT +- +-#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + \ +- 0x60000) +-#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \ +- 0x40000) +-#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \ +- 0x1000000) +- +-/* SP location before relocation, must use scratch RAM */ +-/* BRAM start */ +-#define CONFIG_SYS_INIT_RAM_ADDR 0x0 +-/* BRAM size - will be generated */ +-#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 +- +-# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ +- CONFIG_SYS_INIT_RAM_SIZE - \ +- CONFIG_SYS_MALLOC_F_LEN) +- +-/* Just for sure that there is a space for stack */ +-#define CONFIG_SPL_STACK_SIZE 0x100 +- +-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE +- +-#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \ +- CONFIG_SYS_INIT_RAM_ADDR - \ +- CONFIG_SYS_MALLOC_F_LEN - \ +- CONFIG_SPL_STACK_SIZE) +- +-#endif /* __CONFIG_H */ ++#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ ++ ++/* Initial memory map for Linux */ ++#define CONFIG_SYS_BOOTMAPSZ 0x8000000 ++ ++/* PREBOOT */ ++#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot; echo; dhcp" ++ ++/* Extra U-Boot Env settings */ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ SERIAL_MULTI \ ++ CONSOLE_ARG \ ++ ESERIAL0 \ ++ "nc=setenv stdout nc;setenv stdin nc;\0" \ ++ "ethaddr=00:0a:35:00:22:01\0" \ ++ "autoload=no\0" \ ++ "clobstart=0x81000000\0" \ ++ "netstart=0x81000000\0" \ ++ "dtbnetstart=0x82800000\0" \ ++ "loadaddr=0x81000000\0" \ ++ "bootsize=0x60000\0" \ ++ "bootstart=0x60b00000\0" \ ++ "boot_img=u-boot.bin\0" \ ++ "load_boot=tftpboot ${clobstart} ${boot_img}\0" \ ++ "update_boot=setenv img boot; setenv psize ${bootsize}; setenv installcmd \"install_boot\"; run load_boot test_img; setenv img; setenv psize; setenv installcmd\0" \ ++ "install_boot=protect off ${bootstart} +${bootsize} && erase ${bootstart} +${bootsize} && " "cp.b ${clobstart} ${bootstart} ${filesize}\0" \ ++ "bootenvsize=0x20000\0" \ ++ "bootenvstart=0x60b60000\0" \ ++ "eraseenv=protect off ${bootenvstart} +${bootenvsize} && erase ${bootenvstart} +${bootenvsize}\0" \ ++ "kernelsize=0xc00000\0" \ ++ "kernelstart=0x60b80000\0" \ ++ "kernel_img=image.ub\0" \ ++ "load_kernel=tftpboot ${clobstart} ${kernel_img}\0" \ ++ "update_kernel=setenv img kernel; setenv psize ${kernelsize}; setenv installcmd \"install_kernel\"; run load_kernel test_crc; setenv img; setenv psize; setenv installcmd\0" \ ++ "install_kernel=protect off ${kernelstart} +${kernelsize} && erase ${kernelstart} +${kernelsize} && " "cp.b ${clobstart} ${kernelstart} ${filesize}\0" \ ++ "cp_kernel2ram=cp.b ${kernelstart} ${netstart} ${kernelsize}\0" \ ++ "fpgasize=0xb00000\0" \ ++ "fpgastart=0x60000000\0" \ ++ "fpga_img=system.bit.bin\0" \ ++ "load_fpga=tftpboot ${clobstart} ${fpga_img}\0" \ ++ "update_fpga=setenv img fpga; setenv psize ${fpgasize}; setenv installcmd \"install_fpga\"; run load_fpga test_img; setenv img; setenv psize; setenv installcmd\0" \ ++ "install_fpga=protect off ${fpgastart} +${fpgasize} && erase ${fpgastart} +${fpgasize} && " "cp.b ${clobstart} ${fpgastart} ${filesize}\0" \ ++ "fault=echo ${img} image size is greater than allocated place - partition ${img} is NOT UPDATED\0" \ ++ "test_crc=if imi ${clobstart}; then run test_img; else echo ${img} Bad CRC - ${img} is NOT UPDATED; fi\0" \ ++ "test_img=setenv var \"if test ${filesize} -gt ${psize}\\; then run fault\\; else run ${installcmd}\\; fi\"; run var; setenv var\0" \ ++ "netboot=tftpboot ${netstart} ${kernel_img} && bootm\0" \ ++ "default_bootcmd=bootm ${kernelstart}\0" \ ++"" ++ ++/* BOOTCOMMAND */ ++#define CONFIG_BOOTCOMMAND "run default_bootcmd" ++ ++#undef CONFIG_SPL_BUILD /* Disable SPL by default*/ ++ ++#endif /* __PLNX_CONFIG_H */ +-- +2.1.4 + -- 2.1.4 -- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
