On Tue, Jul 19, 2016 at 6:57 PM, Mike Looijmans <mike.looijm...@topic.nl> wrote: > > On 19-07-16 10:51, Nathan Rossi wrote: > > On Tue, Jul 19, 2016 at 6:05 PM, Mike Looijmans <mike.looijm...@topic.nl> > > wrote: > >> > >> Set MACHINE to zcu102-zynqmp and built a test image. > >> > >> However, the bootloader seems to only build a secondstage u-boot, the first > >> stage is missing. The README suggests it would be there, so what's missing? > >> > > > > Hi Mike, > > > > I am not 100% sure of the state of u-boot-spl for zynqmp (whats > > functional, etc.). But boot.bin support for zynqmp was added in u-boot > > v2016.07, so meta-xilinx does not yet deploy zynqmp SPL by default. > > Okay, so what do I have to do to boot the board? Just upgrade u-boot to the > denx master? Or is there still stuff in u-boot-xlnx that we need?
I don't have any details on booting/configuring the board (I don't have access to any zynqmp hardware). If you have issues or questions it is probably worth querying in the #u-boot irc channel (or on the u-boot mailing list). As for the recipe side cloning the oe-core u-boot recipe and setting it to the v2016.07 release should be sufficient (the spl stuff in meta-xilinx doesn't handle the zynqmp setup). But you will likely need the psu_init_gpl files for the board, have a read of the board/xilinx/zynqmp/Makefile in u-boot for how to put them into the source tree. Deploying the boot.bin is just a matter of setting SPL_BINARY = "spl/boot.bin" in your machine/local.conf. Regards, Nathan > > (I'd prefer to have SPL of course. It's probably possible to build an FSBL > with Vivado, but that's rather useless if you want to have automated builds.) > > > > Kind regards, > > > > Mike Looijmans > > System Expert > > > > > > TOPIC Products > > > > > > Materiaalweg 4 > > > > > > 5681 RJ Best > > T: > > +31 (0) 499 33 69 69 > > Postbus 440 > > E: > > mike.looijm...@topicproducts.com > > 5680 AK Best > > W: > > www.topicproducts.com > > The Netherlands > > > Please consider the environment before printing this e-mail > > > Topic zoekt gedreven (embedded) software specialisten! > -- _______________________________________________ meta-xilinx mailing list meta-xilinx@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-xilinx