On 21-07-16 09:49, Mike Looijmans wrote:
> On 20-07-16 12:52, Michal Simek wrote:
> > On 20.7.2016 07:43, Mike Looijmans wrote:
> >> On 19-07-16 23:03, Philip Balister wrote:
> >> > On 07/19/2016 11:15 AM, Michal Simek wrote:
> >> ...
> >> >> SPL support for this board will be merged to xilinx u-boot tree pretty
> >> >> soon. I have already added all psu_init files to the tree.
> >> >> Just wait couple of days and then you can use it.
> >> >>
> >> >> But still keep in your mind SPL is not officially supported boot flow.
> >> >
> >> > Who are the right people to talk to about this? It always good to remind
> >> > people in official Xilinx positions how much we value SPL support.
> >>
> >> +1 to that.
> >
> > Philip: You will have a chance to talk to that people soon.
> >
> > I have just pushed new branch based on the latest u-boot tree.
> > https://github.com/Xilinx/u-boot-xlnx
> >
> > You should be able to get spl up and running on zcu102 board directly.
>
> <debug_uart> Debug uart enabled
>
> U-Boot SPL 2016.07 (Jul 20 2016 - 13:40:30)
> EL Level: EL3
> Trying to boot from MMC1
> reading u-boot.bin
> reading atf.ub
> spl_load_image_fat: error reading image atf.ub, err - -1
> reading u-boot.img
> spl_load_image_fat: error reading image u-boot.img, err - -1
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
>
>
> The build did produce u-boot.bin, but I have no idea what the "atf.ub" and
> "u-boot.img" files are supposed to do.
>
Ah, there's some stuff missing in the u-boot recipe. It builds "u-boot.img"
but does not deploy it yet. Manually performing that step gets me into the
u-boot prompt.
> On 20-07-16 12:52, Michal Simek wrote:
> > On 20.7.2016 07:43, Mike Looijmans wrote:
> >> On 19-07-16 23:03, Philip Balister wrote:
> >> > On 07/19/2016 11:15 AM, Michal Simek wrote:
> >> ...
> >> >> SPL support for this board will be merged to xilinx u-boot tree pretty
> >> >> soon. I have already added all psu_init files to the tree.
> >> >> Just wait couple of days and then you can use it.
> >> >>
> >> >> But still keep in your mind SPL is not officially supported boot flow.
> >> >
> >> > Who are the right people to talk to about this? It always good to remind
> >> > people in official Xilinx positions how much we value SPL support.
> >>
> >> +1 to that.
> >
> > Philip: You will have a chance to talk to that people soon.
> >
> > I have just pushed new branch based on the latest u-boot tree.
> > https://github.com/Xilinx/u-boot-xlnx
> >
> > You should be able to get spl up and running on zcu102 board directly.
>
> <debug_uart> Debug uart enabled
>
> U-Boot SPL 2016.07 (Jul 20 2016 - 13:40:30)
> EL Level: EL3
> Trying to boot from MMC1
> reading u-boot.bin
> reading atf.ub
> spl_load_image_fat: error reading image atf.ub, err - -1
> reading u-boot.img
> spl_load_image_fat: error reading image u-boot.img, err - -1
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
>
>
> The build did produce u-boot.bin, but I have no idea what the "atf.ub" and
> "u-boot.img" files are supposed to do.
>
Ah, there's some stuff missing in the u-boot recipe. It builds "u-boot.img"
but does not deploy it yet. Manually performing that step gets me into the
u-boot prompt.
Kind regards,
Mike Looijmans
System Expert
|
TOPIC Products |
|
| |
|
Materiaalweg 4 |
|
| |
|
5681 RJ Best |
T: |
+31 (0) 499 33 69 69 | |
|
Postbus 440 |
E: |
||
|
5680 AK Best |
W: |
||
| The Netherlands |
Please consider the
environment before printing this e-mail
Topic zoekt gedreven (embedded) software specialisten!
-- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
