If I modify the devicetree and disable the 'psci' part, the system boots fine
but doesn't wake the other three cores.
On 21-07-16 13:30, Mike Looijmans wrote:
> I got the "dev" kernel to compile by removing the Xilinx PHY support (which
> was causing the failure). The resulting ~4.5 kernel crashes on the same spot,
> also in the psci core.
>
>
> On 21-07-16 10:57, Mike Looijmans wrote:
> > With current meta-xilinx master the kernel won't boot on the zcu102 board, it
> > crashes on an invalid instruction. I tried using "linux-xlnx-dev" as provider
> > but that won't even compile.
but doesn't wake the other three cores.
On 21-07-16 13:30, Mike Looijmans wrote:
> I got the "dev" kernel to compile by removing the Xilinx PHY support (which
> was causing the failure). The resulting ~4.5 kernel crashes on the same spot,
> also in the psci core.
>
>
> On 21-07-16 10:57, Mike Looijmans wrote:
> > With current meta-xilinx master the kernel won't boot on the zcu102 board, it
> > crashes on an invalid instruction. I tried using "linux-xlnx-dev" as provider
> > but that won't even compile.
Kind regards,
Mike Looijmans
System Expert
|
TOPIC Products |
|
| |
|
Materiaalweg 4 |
|
| |
|
5681 RJ Best |
T: |
+31 (0) 499 33 69 69 | |
|
Postbus 440 |
E: |
||
|
5680 AK Best |
W: |
||
| The Netherlands |
Please consider the
environment before printing this e-mail
Topic zoekt gedreven (embedded) software specialisten!
-- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
