On Sat, Jul 23, 2016 at 12:05 AM, Mike Looijmans <mike.looijm...@topic.nl> wrote: > To boot with the firmware loaded, we need the binary packaged as a u-boot > image. Add the extra step to do so and output the file that u-boot SPL > expects to find on the SD card.
Applied. Thanks, Nathan > > Signed-off-by: Mike Looijmans <mike.looijm...@topic.nl> > --- > recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb > b/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb > index 08f696b..f384f5b 100644 > --- a/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb > +++ b/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb > @@ -7,6 +7,8 @@ PACKAGE_ARCH = "${MACHINE_ARCH}" > > inherit deploy > > +DEPENDS += "u-boot-mkimage-native" > + > S = "${WORKDIR}/git" > > BRANCH = "master" > @@ -45,5 +47,6 @@ do_deploy() { > install -d ${DEPLOYDIR} > install -m 0644 ${S}/build/${PLATFORM}/release/bl31/bl31.elf > ${DEPLOYDIR}/bl31-${MACHINE}.elf > install -m 0644 ${S}/build/${PLATFORM}/release/bl31.bin > ${DEPLOYDIR}/bl31-${MACHINE}.bin > + mkimage -A arm64 -O linux -T kernel -C none -a 0xfffe5000 -e > 0xfffe5000 -d ${S}/build/${PLATFORM}/release/bl31.bin ${DEPLOYDIR}/atf.ub > } > addtask deploy before do_build after do_compile > -- > 1.9.1 > -- _______________________________________________ meta-xilinx mailing list meta-xilinx@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-xilinx