Hi Oleg Now I can run python on ZC706 board, but it seems missing some python module.
I want install full python module like subprocess,socket module Thanks. [cid:[email protected]] From: Oleg K Dzhimiev [mailto:[email protected]] Sent: Thursday, August 25, 2016 10:57 PM To: Cai, Chuntian (GE Transportation) Cc: [email protected] Subject: EXT: Re: [meta-xilinx] How to setup python to rootfs Hi, If you are editing the rootfs image recipe by hand then add: IMAGE_INSTALL_append += "python3-core" Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 5555 x124 Elphel, Inc. On 25 August 2016 at 03:17, Cai, Chuntian (GE Transportation) <[email protected]<mailto:[email protected]>> wrote: Hi, Could you tell me how to setup python to target rootfs? I need python 3.5 for ZC706 board. Thanks. -----Original Message----- From: da Silva Filho, Josias [mailto:[email protected]<mailto:[email protected]>] Sent: Thursday, August 04, 2016 10:49 AM To: Cai, Chuntian (GE Transportation) <[email protected]<mailto:[email protected]>>; Nathan Rossi <[email protected]<mailto:[email protected]>> Cc: [email protected]<mailto:[email protected]> Subject: EXT: RE: How to modify the linux source. http://www.yoctoproject.org/docs/latest/dev-manual/dev-manual.html#using-devtool-in-your-workflow Regards, Josias ________________________________________ From: Cai, Chuntian (GE Transportation) [[email protected]<mailto:[email protected]>] Sent: Wednesday, August 03, 2016 9:54 PM To: da Silva Filho, Josias; Nathan Rossi Cc: [email protected]<mailto:[email protected]> Subject: RE: How to modify the linux source. Hi, If you have user manual for devtool? I do not understand the command, but it works. -----Original Message----- From: da Silva Filho, Josias [mailto:[email protected]<mailto:[email protected]>] Sent: Tuesday, August 02, 2016 9:40 PM To: Cai, Chuntian (GE Transportation); Nathan Rossi Cc: [email protected]<mailto:[email protected]> Subject: EXT: RE: How to modify the linux source. Try this: $ devtool modify -s virtual/kernel <path_you_want_the_kernel_source_to_be> Then modify the kernel source in that path. Finally, do: $ bitbake virtual/kernel Regards, Josias Inacio da Silva Filho | Software Engineer 2 [email protected]<mailto:[email protected]> | 3500 Carling Avenue | Ottawa, ON K2H 8E9 Canada -----Original Message----- From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Cai, Chuntian (GE Transportation) Sent: Tuesday, August 02, 2016 5:54 AM To: Nathan Rossi Cc: [email protected]<mailto:[email protected]> Subject: [meta-xilinx] How to modify the linux source. Hi , I want modifid the the source :driver/hwmon/pmbus/ucd9000.c Then I run bitbake linux-xlnx -c build But there have no any response, jut do nothing. How to modify kernel source and apply it to build new image? Thanks. -----Original Message----- From: Nathan Rossi [mailto:[email protected]<mailto:[email protected]>] Sent: Wednesday, July 27, 2016 7:02 PM To: Cai, Chuntian (GE Transportation) Cc: Oleg K Dzhimiev; [email protected]<mailto:[email protected]> Subject: EXT: Re: How to write .bb file for package On Wed, Jul 27, 2016 at 7:09 PM, Cai, Chuntian (GE Transportation) <[email protected]<mailto:[email protected]>> wrote: > > Memtestrer: It is an open source tool. You can download it from > https://urldefense.proofpoint.com/v2/url?u=http-3A__pyropus.ca_softwar > e_memtester_&d=CwIFaQ&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r= > Ei3floKgst6PhYpovUjTVlWwDEc4CVl_t-gxqM04eQY&m=8lfyAOv7H7ObiGkCy_SYZA3e > 3R1dDF9NJw3fznpyOLc&s=M2jFqhb5o4yMdze1TgWXb8HYhtrFHAxqGhZyMYRuPSc&e= > > > > I added memtest folder in meta-custom/recipes-example/memtest > > It seems bitbake can detect this change and try to install it. > > > > But seems bitbake could not find the Makefile for install it. > > > > The attached file are > memtester_4.3.bb<https://urldefense.proofpoint.com/v2/url?u=http-3A__memtester-5F4.3.bb&d=CwMFaQ&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=Ei3floKgst6PhYpovUjTVlWwDEc4CVl_t-gxqM04eQY&m=qR-50vLk8HDc7MiSOVLTvFWlh9cMcgls_A0Sr8oUfX4&s=ZrnscGUxEcN42YPVJKXyjAiU69BKuUgQIif6m0wom_w&e=> > and local.conf A memtester recipe (for the same project you mention) is already available in meta-openembedded/meta-oe. https://layers.openembedded.org/layerindex/branch/master/recipes/?q=memtester The recipe file is here: http://cgit.openembedded.org/meta-openembedded/tree/meta-oe/recipes-benchmark/memtester/memtester_4.3.0.bb. It appears that for that recipe there is some special configuration, a patch to the Makefile as well as a custom "do_install" task. On a side note. General Yocto/OE related questions (like this one) are better asked on the Yocto mailing list (https://www.yoctoproject.org/tools-resources/community/mailing-lists). Regards, Nathan > > > > Please help check it. > > > > From: Oleg K Dzhimiev [mailto:[email protected]<mailto:[email protected]>] > Sent: Saturday, July 23, 2016 1:37 AM > To: Cai, Chuntian (GE Transportation) > Cc: Nathan Rossi; > [email protected]<mailto:[email protected]> > Subject: EXT: Re: [meta-xilinx] How to install mtd-utils on rootfs > > > > 1. do_compile is not the last task for rootfs - should be do_image. > > Run these (the 2nd line is without command defined - the recipe will run > through all of the tasks): > > bitbake core-image-minimal -c configure -f > > bitbake core-image-minimal > > > > 2a. The compiled mtd-utils programs go to: > poky/build/tmp/work/<some-long-name>/mtd-utils/<mtd-utils-version>/ima > ge/usr/sbin/ > > 2b. If the result rootfs is *.tar.gz - check the build date then just > open the archive and see if flashcp is in /usr/sbin/ > > > > On 22 July 2016 at 05:58, Cai, Chuntian (GE Transportation) > <[email protected]<mailto:[email protected]>> wrote: > > How about tmp/sysroots dir ? it is used to generate rootfs? > > > > If mtd-util properly installed ,I should found flashcp here? > > > > Thanks. > > > > > > > > From: Oleg K Dzhimiev [mailto:[email protected]<mailto:[email protected]>] > Sent: Friday, July 22, 2016 2:16 PM > To: Cai, Chuntian (GE Transportation) > Cc: Nathan Rossi; > [email protected]<mailto:[email protected]> > Subject: EXT: Re: [meta-xilinx] How to install mtd-utils on rootfs > > > > 1. To > poky/meta/recipes-core/images/core-image-minimal.bb<https://urldefense.proofpoint.com/v2/url?u=http-3A__core-2Dimage-2Dminimal.bb&d=CwMFaQ&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=Ei3floKgst6PhYpovUjTVlWwDEc4CVl_t-gxqM04eQY&m=qR-50vLk8HDc7MiSOVLTvFWlh9cMcgls_A0Sr8oUfX4&s=nnMRMVZN9acIhb68gRWTCj1g4Fyx6rzngQ1HS4cV3dU&e=> > add: > > > > IMAGE_INSTALL_append += " \ > > mtd-utils \ > > mtd-utils-misc \ > > " > > > > 2. Or create a core-image-minimal.bbappend file in the meta-xilinx layer and > put the text above there. > > > > 3. Or create your own recipe - example: > core-image-elphel393.bb<https://urldefense.proofpoint.com/v2/url?u=http-3A__core-2Dimage-2Delphel393.bb&d=CwMFaQ&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=Ei3floKgst6PhYpovUjTVlWwDEc4CVl_t-gxqM04eQY&m=qR-50vLk8HDc7MiSOVLTvFWlh9cMcgls_A0Sr8oUfX4&s=l1ccvaTxT6Wna7PdVy2S_BXKDqHoE_gMw5kZdpF-7aQ&e=> > > > > > > On 21 July 2016 at 04:06, Cai, Chuntian (GE Transportation) > <[email protected]<mailto:[email protected]>> wrote: > > Hi Rossi, > > I want use mtd-utils to test MTD dirver, could you tell me how to install it > when I build rootfs. > > My board is ZC706 and I use bitbake core-image-minimal make > uboot,uimage and dtb > > Thanks. > > > -----Original Message----- > From: Nathan Rossi > [mailto:[email protected]<mailto:[email protected]>] > Sent: Thursday, July 21, 2016 5:14 PM > To: Cai, Chuntian (GE Transportation) > <[email protected]<mailto:[email protected]>> > Cc: > [email protected]<mailto:[email protected]> > Subject: EXT: Re: uRamdisk.image.gz > > Hi, > > "uramdisk.image.gz" is just another name for "*.cpio.gz.u-boot" (or any > initramfs/initrd format e.g. ext. Which is gzipped and wrapped with the > u-boot image header). > > All meta-xilinx machines are setup by default to generate the > *.cpio.gz.u-boot for the images you build. You can get other formats like > ext.gz.u-boot, etc by adding them to IMAGE_FSTYPES > (http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx/tree/docs/Rootfs). > > If you want it named as "uramdisk.image.gz" renaming it to that when writing > it to the sd card/etc is sufficient. > > Regards, > Nathan > > On Thu, Jul 21, 2016 at 6:47 PM, Cai, Chuntian (GE Transportation) > <[email protected]<mailto:[email protected]>> wrote: > > Hi Rossi, > > > > Could you tell me how to make uRamdisk.image.gz with YOCTO toolchain. > > > > Thanks. > > > > > > -----Original Message----- > > From: Nathan Rossi > > [mailto:[email protected]<mailto:[email protected]>] > > Sent: Tuesday, July 12, 2016 5:22 PM > > To: Cai, Chuntian (GE Transportation) > > <[email protected]<mailto:[email protected]>> > > Cc: > > [email protected]<mailto:[email protected]> > > Subject: EXT: Re: [meta-xilinx] I could not download linux-xlnx.git from > > YOCTO. > > > > On Tue, Jul 12, 2016 at 11:59 AM, Cai, Chuntian (GE Transportation) > > <[email protected]<mailto:[email protected]>> wrote: > >> Hi Rossi, > >> > >> I am strange, I can download all the package except for > >> linux-xlnx-4.4-xilinx.git package with current proxy setting. > >> > > > > Since you are using poky, I suspect you might be getting a large percentage > > of your sources from the poky source mirror. This is fine, but it means > > that you only need to do http downloads even for some of the recipes that > > have git sources. > > > >> I can open the website > >> https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_Xilinx_linux-2Dxlnx&d=CwIFaQ&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=Ei3floKgst6PhYpovUjTVlWwDEc4CVl_t-gxqM04eQY&m=nq8czs_U5UXDvXM4ciXRICgPDdXYu7ElFGMISg-LHBI&s=g9Dyxs-86wE5plyauMqhKrxK8lVmDN8OaMc279mWldE&e= > >> from IE & firefox. > >> > >> I setted proxy setting in the ~./bashrc. > > > > I have seen issues with proxies before for kernel repos, this is due to the > > large pack files that git attempts to retrieve. And the delayed time it > > takes to compress the pack files on the remote which some proxies timeout > > on. Sometimes using a different protocol works better that others. Try to > > clone the repo outside of yocto. Also try the different protocols if one > > fails. e.g. > > > > git clone > > https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_Xili > > nx > > _linux-2Dxlnx.git&d=CwIFaQ&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQ > > YW > > SI&r=Ei3floKgst6PhYpovUjTVlWwDEc4CVl_t-gxqM04eQY&m=nq8czs_U5UXDvXM4c > > iX > > RICgPDdXYu7ElFGMISg-LHBI&s=x-ZWgWgfN-aaj3mudJuBFjg1KicY-DqWbbIpbJVqw > > hw > > &e= > > or (ssh) > > git clone > > [email protected]:Xilinx/linux-xlnx.git<mailto:[email protected]:Xilinx/linux-xlnx.git> > > or (git) > > git clone > > git://github.com/Xilinx/linux-xlnx.git<https://urldefense.proofpoint.com/v2/url?u=http-3A__github.com_Xilinx_linux-2Dxlnx.git&d=CwMFaQ&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=Ei3floKgst6PhYpovUjTVlWwDEc4CVl_t-gxqM04eQY&m=qR-50vLk8HDc7MiSOVLTvFWlh9cMcgls_A0Sr8oUfX4&s=3icHN4RNZOY_hVGjNHZtE0XdiOp8cl-LPKvRf6sagiM&e=> > > > > If you find that one of these protocols work, change the protocol > > value in the linux-xlnx.inc recipe to use it > > (http://git.yoctoproject.org/cgit/cgit.cgi/meta-xilinx/tree/recipes- > > ke rnel/linux/linux-xlnx.inc#n12), setting the "protocol" value to > > either https, ssh or git. > > > > If you have no success with that, your easiest solution is to pull down the > > repo with proper access to the public internet, and bring it into your > > network (if permitted). Although I have limited understanding of your > > companies IT policies, so it would be in your best interest to contact your > > companies IT department for assistance, as this is an issue with the > > service they are maintaining for you. > > > > If you do get the repo cloned outside of yocto, you can bring the repo in > > manually. The following should work assuming you replace the paths with > > those appropriate to your setup. > > > > git clone --mirror <path to local linux-xlnx clone> <path to yocto > > build>/downloads/git2/github.com.Xilinx.linux-xlnx.git > > > >> > >> > >> Can I change fetch method from git download method to file download > >> method? And how to modify? Because I can download > >> linux-xlnx-4.4-xilinx.git with IE. > > > > Due to the way the recipe functions it relies on the git repository. > > So it would require some work to make it operate with just the working tree > > source that you can get when downloading the zip from github. > > > > Regards, > > Nathan > > > >> > >> > >> Thanks. > >> > >> > >> -----Original Message----- > >> From: Nathan Rossi > >> [mailto:[email protected]<mailto:[email protected]>] > >> Sent: Monday, July 11, 2016 8:24 PM > >> To: Cai, Chuntian (GE Transportation) > >> <[email protected]<mailto:[email protected]>> > >> Cc: > >> [email protected]<mailto:[email protected]> > >> Subject: EXT: Re: [meta-xilinx] I could not download linux-xlnx.git from > >> YOCTO. > >> > >> Hi, > >> > >> Looks like you might be stuck inside an internal corporate network which > >> doesn't not allow direct access to the public internet. Which is why you > >> are getting a "Connection reset by peer" error from git. You will need to > >> figure out what setup you have for your company and then configure access > >> to the internet via a proxy or pre-download the sources and transfer them > >> to your internal machine. > >> > >> Here is a some info for configuring Yocto to handle some of the common > >> proxies https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy. > >> If you have already setup the proxy for http, make sure you have also > >> setup https, ftp, ssh and git proxy configurations. The linux-xlnx recipe > >> specifically relies on https access to > >> github.com<https://urldefense.proofpoint.com/v2/url?u=http-3A__github.com&d=CwMFaQ&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=Ei3floKgst6PhYpovUjTVlWwDEc4CVl_t-gxqM04eQY&m=qR-50vLk8HDc7MiSOVLTvFWlh9cMcgls_A0Sr8oUfX4&s=AvBzrYvktsljxbRhP77N64ssK53oxqWnru-jKaUf1mk&e=>. > >> > >> Regards, > >> Nathan > >> > >> On Mon, Jul 11, 2016 at 5:27 PM, Cai, Chuntian (GE Transportation) > >> <[email protected]<mailto:[email protected]>> wrote: > >>> I setup YOCTO compilation system I could downloand almost package > >>> but failed wirh downloading linux-xlnx-4.4-xilinx.git. > >>> > >>> > >>> 0: linux-xlnx-4.4-xilinx+gitAUTOINC+89cc643aff-r0 do_fetch (pid > >>> 28925) > >>> > >>> when I run bitbake core-image-x11 second tims, It always wait on > >>> this action. > >>> > >>> below picture is error output when I first run bitbake > >>> core-image-x11 last friday. > >>> > >>> > >>> > >>> > >>> > >>> Xilinx > >>> Support > >>> | Xilinx Service Portal | Xilinx User Community Forums > >>> > >>> > >>> > >>> > >>> > >>> This email and any attachments are intended for the sole use of > >>> the named > >>> recipient(s) and contain(s) confidential information that may be > >>> proprietary, privileged or copyrighted under applicable law. If > >>> you are not the intended recipient, do not read, copy, or forward > >>> this email message or any attachments. Delete this email message and any > >>> attachments immediately. > >>> > >>> > >>> > >>> This email and any attachments are intended for the sole use of > >>> the named > >>> recipient(s) and contain(s) confidential information that may be > >>> proprietary, privileged or copyrighted under applicable law. If > >>> you are not the intended recipient, do not read, copy, or forward > >>> this email message or any attachments. Delete this email message and any > >>> attachments immediately. > >>> > >>> > >>> -- > >>> _______________________________________________ > >>> meta-xilinx mailing list > >>> [email protected]<mailto:[email protected]> > >>> https://lists.yoctoproject.org/listinfo/meta-xilinx > >>> > -- > _______________________________________________ > meta-xilinx mailing list > [email protected]<mailto:[email protected]> > https://lists.yoctoproject.org/listinfo/meta-xilinx > > > > > > -- > > Best regards, > Oleg Dzhimiev > Electronics Engineer > phone: +1 801 783 5555 x124<tel:%2B1%20801%20783%205555%20x124> > Elphel, Inc. > > > > > > -- > > Best regards, > Oleg Dzhimiev > Electronics Engineer > phone: +1 801 783 5555 x124<tel:%2B1%20801%20783%205555%20x124> > Elphel, Inc. -- _______________________________________________ meta-xilinx mailing list [email protected]<mailto:[email protected]> https://lists.yoctoproject.org/listinfo/meta-xilinx -- _______________________________________________ meta-xilinx mailing list [email protected]<mailto:[email protected]> https://lists.yoctoproject.org/listinfo/meta-xilinx
-- _______________________________________________ meta-xilinx mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-xilinx
